2.7.2 addresses the messy requirement situation, but in the meantime be
sure to use xCAT 2.7.1 and use zypper or yum to install xCAT-genesis-x86_64
and elilo-xcat.
This is all assuming you have dx 360 M4 systems. I assume that's the case.
On Thu, May 17, 2012 at 3:51 AM, Luis Cabellos <[email protected]>wrote:
> I'm installing xcat in a cluster 1350 of IBM
> http://sourceforge.net/apps/mediawiki/xcat/index.php?title=XCAT_iDataPlex_Cluster_Quick_Start,
> but in the discovering of nodes (currently I'm testing with a simple node)
> I have several problems:
>
> * The IP i put in the chtab is different to the assignated on the DHCP.
> Eg, the node should get 10.22.1.2, it gets 10.22.1.76 :
>
> May 16 12:31:14 ojancano dhcpd: DHCPDISCOVER from 34:40:b5:b8:73:4c via
> eth1
> May 16 12:31:15 ojancano dhcpd: DHCPOFFER on 10.22.1.76 to
> 34:40:b5:b8:73:4c via eth1
>
>
> * After dhcp load of kernel in the node, the node remains writing the
> errors cat: can't open '/tmp/dhcpserver': No such file or directory and
> grep: /tmp/destiny: No such file or directory
>
> * The BMCsetup don't set the MAC of node definition (the manual says it
> should set the bmc password, the mac address of the node which gotten by
> discovery, the hardware type and the hardware serial number)
>
> Anyone have a hint of the solution? Thanks.
>
> I'm using the same templates of xcat e1350, but changing the IP ranges.
>
> The configuration of nodes:
>
> # lsdef node2
> Object name: node2
> bmc=bmc2
> chain=runcmd=bmcsetup,standby
> groups=ipmi,idataplex,compute,all
> ip=10.22.1.2
> mgt=ipmi
> netboot=xnba
> ondiscover=nodediscover
> postbootscripts=otherpkgs
> postscripts=syslog,remoteshell,syncfiles
> profile=compute
> rack=1
> switch=switch1
> switchport=1/2
> unit=A2
>
> # lsdef bmc2
> Object name: bmc2
> groups=idataplex-bmc
> ip=10.22.101.2
> postbootscripts=otherpkgs
> postscripts=syslog,remoteshell,syncfiles
>
> # lsdef switch1
> Object name: switch1
> groups=switch
> ip=10.22.0.101
> postbootscripts=otherpkgs
> postscripts=syslog,remoteshell,syncfiles
>
>
> I have several G8052 switches, and I try to set the switchport to
> different values (1/2, Ethernet2, 2) but it didn't change anything
>
> Thanks a lot,
> Luis Cabellos
>
>
>
> ------------------------------------------------------------------------------
> Live Security Virtual Conference
> Exclusive live event will cover all the ways today's security and
> threat landscape has changed and how IT managers can respond. Discussions
> will include endpoint security, mobile security and the latest in malware
> threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
> _______________________________________________
> xCAT-user mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/xcat-user
>
------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can respond. Discussions
will include endpoint security, mobile security and the latest in malware
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user
