I'm trying to PXE boot an IBM System x3550 M4 Server (7914) via its Emulex OneConnect 10Gb NIC (be3 - rev 02) with no success.
The 10gb interface is going over one switch, and the twisted pair is on another. The management node is connected to each of these switches by its own respective 10gb and twisted pair NICs. I can PXE boot off the 3550's twisted-pair interfaces without a problem. When it does boot into discovery mode, it identifies the 10Gb interface and gives it an IP via DHCP. I can verify connectivity to the 10gb from the management node by pinging the compute node from the management node when it is PXE booted via the twisted pair. I've used telnet into port 80 to verify connectivity via the 10gb's private cluster IP addresss. I've checked the settings in the Emulex utility to verify that PXE booting is enabled and that it detects a link. I've verified that the dhcpd.conf file specifies the correct ip for next-server for the twisted pair interface (172.31.11.12) and 10gb interface (172.20.11.12), as well as the correct filename for the twisted pair (filename = "http://172.31.11.12/tftpboot/xcat/xnba/nets/172.31.0.0_16";) and 10gb interface (filename = "http://172.20.11.12/tftpboot/xcat/xnba/nets/172.20.0.0_16";). Thanks, Darian J. DeFalco Systems Engineer Cold Spring Harbor Laboratory (516) 367-8362 ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ xCAT-user mailing list xCAT-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xcat-user
