Hello,
after setting up Hierarchical Cluster I'm facing problem with copying filesets
to SN nodes.
version on MN and SN is:
lsxcatd -v
Version 2.7.4 (svn r13602, built Thu Aug 23 22:42:11 EDT 2012)
I have my own lpp_source on NIM master with custom filesets. This lpp_source
was not build with mknimimage script. (But i'm facing the same problem with
other osimage created with mknimimage)
Defined SN and CN.
list of xCAT definitions on MN:
# lsdef XXXXmtr05
Object name: XXXXmtr05
cons=hmc
groups=lpar,all
hcp=XXXXhmcp6
hwtype=lpar
id=62
installnic=0
mgt=hmc
nodetype=ppc,osi
parent=XXXX
postscripts=aixremoteshell,otherpkgs,syncfiles,setupntp,confignimsh,es_copy_dsa_key
pprofile=Normal
profile=esus
servicenode=XXXXnimwint
xcatmaster=XXXXnimwint
# lsdef -t osimage esus
Object name: esus
imagetype=NIM
lpp_source=esus_lpp_source
nimmethod=rte
nimtype=standalone
osname=AIX
# lsnim -l esus_lpp_source
esus_lpp_source:
class = resources
type = lpp_source
arch = power
Rstate = ready for use
prev_state = unavailable for use
nfs_vers = 4
location = /install/nim/lpp_source/esus_lpp_source
alloc_count = 0
server = master
# nim -o showres esus_lpp_source
Fileset Name Level I/U Q Content
====================================================================
esus.amant.core 1.1.0.6 I N usr,root
# E-SYS AMANT core
esus.amant.backupos.clnt 1.1.0.1 I N usr,root
# Enterprise Systems backup client
esus.perl.man 1.0.0.0 I N usr
# E-SYS Perl man
esus.perl.rte 1.1.0.0 I N usr
# E-SYS Perl
Becasue I didn't find any way how to push custom lpp_source to SN I pushed this
lpp_source location to SN and created the same lpp_sources on SN NIM.
nimnodeset is unusable with allready running and installed CN and custom
lpp_source = must deallocate resources on SN NIM. It would be nice to have this
functionality to sync NIMs resources to SN oe am I missing something?
after using command updatenode:
#updatenode XXXXmtr05 -V -S installp_bundle="amant_bnd,amant_backupos_clnt_bnd"
installp_flags="-apXY"
Error: Could not copy I:esus.perl.rte to XXXXnimwint.
Error: Could not copy I:esus.amant.core to XXXXnimwint.
Error: Could not copy I:esus.amant.backupos.clnt to XXXXnimwint.
Running command on XXXXcsm: /usr/sbin/lsnim -a location -Z esus_lpp_source
2>/dev/null 2>&1
Running command on XXXXcsm: /usr/sbin/lsnim -a location -Z amant_bnd
2>/dev/null 2>&1
Running command on XXXXcsm: cat /install/nim/installp_bundle/amant.bnd 2>&1
Running command on XXXXcsm: /usr/sbin/lsnim -a location -Z
amant_backupos_clnt_bnd 2>/dev/null 2>&1
Running command on XXXXcsm: cat
/install/nim/installp_bundle/amant_backupos_clnt.bnd 2>&1
Running internal xCAT command: xdsh ...
Running command on XXXXcsm: /bin/hostname 2>&1
Running command on XXXXcsm: ifconfig -a| grep "inet" 2>&1
Running internal xCAT command: xdsh ...
Running command on XXXXcsm: /bin/hostname 2>&1
Running command on XXXXcsm: ifconfig -a| grep "inet" 2>&1
Copying files to XXXXnimwint.
Running internal xCAT command: xdcp ...
Running command on XXXXcsm: /bin/hostname 2>&1
Running command on XXXXcsm: ifconfig -a| grep "inet" 2>&1
Copying files to XXXXnimwint.
Running internal xCAT command: xdcp ...
Running command on XXXXcsm: /bin/hostname 2>&1
Running command on XXXXcsm: ifconfig -a| grep "inet" 2>&1
Copying files to XXXXnimwint.
Running internal xCAT command: xdcp ...
Running command on XXXXcsm: /bin/hostname 2>&1
Running command on XXXXcsm: ifconfig -a| grep "inet" 2>&1
Running command on XXXXcsm: /bin/hostname 2>&1
Running command on XXXXcsm: ifconfig -a| grep "inet" 2>&1
Performing software maintenance operations. This could take a while.
Running command on XXXXnimwint: cp /tmp/installp_file-1346921123
/install/nim/lpp_source/esus_lpp_source; chmod 444
//install/nim/lpp_source/esus_lpp_source/installp_file-1346921123 2>&1
Running command on XXXXnimwint: exportfs -i -o vers=4
/install/nim/lpp_source/esus_lpp_source 2>&1
Running command on XXXXnimwint: /bin/chmod -R +r
/install/nim/lpp_source/esus_lpp_source 2>&1
Running command: mkdir -m 644 -p /xcatmnt; mount -o vers=4
XXXXnimwint:/install/nim/lpp_source/esus_lpp_source /xcatmnt
Running internal xCAT command: xdsh ...
Running command on XXXXnimwint: /bin/hostname 2>&1
Running command on XXXXnimwint: ifconfig -a| grep "inet" 2>&1
Running: '/usr/sbin/installp -d /xcatmnt/installp/ppc -apXY -f
/xcatmnt/installp_file-1346921123'.
Running internal xCAT command: xdsh ...
Running command on XXXXnimwint: /bin/hostname 2>&1
Running command on XXXXnimwint: ifconfig -a| grep "inet" 2>&1
XXXXmtr05: WARNINGS
XXXXmtr05: --------
XXXXmtr05: Problems described in this section are not likely to be the source
of any
XXXXmtr05: immediate or serious failures, but further actions may be necessary
or
XXXXmtr05: desired.
XXXXmtr05:
XXXXmtr05:
XXXXmtr05: NOTE: Base level filesets may be reinstalled using the "Force"
XXXXmtr05: option (-F flag), or they may be removed, using the deinstall or
XXXXmtr05: "Remove Software Products" facility (-u flag), and then reinstalled.
XXXXmtr05:
XXXXmtr05: << End of Warning Section >>
XXXXmtr05:
*******************************************************************************
XXXXmtr05: installp PREVIEW: installation will not actually occur.
XXXXmtr05:
*******************************************************************************
XXXXmtr05:
+-----------------------------------------------------------------------------+
XXXXmtr05: Pre-installation Verification...
XXXXmtr05:
+-----------------------------------------------------------------------------+
XXXXmtr05: Verifying selections...done
XXXXmtr05: Verifying requisites...done
XXXXmtr05: Results...
XXXXmtr05: Already Installed
XXXXmtr05: -----------------
XXXXmtr05: The following filesets which you selected are either already
installed
XXXXmtr05: or effectively installed through superseding filesets.
XXXXmtr05:
XXXXmtr05: esus.perl.rte 1.1.0.0 # E-SYS Perl
XXXXmtr05: esus.amant.core 1.1.0.6 # E-SYS AMANT core
XXXXmtr05: esus.amant.backupos.clnt 1.1.0.1 # Enterprise Systems backup cl...
XXXXmtr05:
XXXXmtr05:
+-----------------------------------------------------------------------------+
XXXXmtr05: BUILDDATE Verification ...
XXXXmtr05:
+-----------------------------------------------------------------------------+
XXXXmtr05: Verifying build dates...done
XXXXmtr05: FILESET STATISTICS
XXXXmtr05: ------------------
XXXXmtr05: 3 Selected to be installed, of which:
XXXXmtr05: 3 Already installed (directly or via superseding filesets)
XXXXmtr05: ----
XXXXmtr05: 0 Total to be installed
XXXXmtr05:
******************************************************************************
XXXXmtr05: End of installp PREVIEW. No apply operation has actually occurred.
XXXXmtr05:
******************************************************************************
Running command: /usr/sbin/updtvpkg
Running internal xCAT command: xdsh ...
Running command on XXXXnimwint: /bin/hostname 2>&1
Running command on XXXXnimwint: ifconfig -a| grep "inet" 2>&1
Running command: umount -f /xcatmnt
Running internal xCAT command: xdsh ...
Running command on XXXXnimwint: /bin/hostname 2>&1
Running command on XXXXnimwint: ifconfig -a| grep "inet" 2>&1
Running command on XXXXnimwint: rm -f
/install/nim/lpp_source/esus_lpp_source/installp_file-1346921123; rm -f
/tmp/installp_file-1346921123 2>&1
Running command on XXXXnimwint: exportfs -u -F
/install/nim/lpp_source/esus_lpp_source 2>&1
Cluster node software update commands have completed successfully.
might be hint? I did some hook in xdsh.pm in fuctions xdcp and xdsh I saw emtpy
noderanges and only one source path ...
---XDSH---
nodes='ARRAY(0x212d2b88)'; args='ARRAY(0x212d2028)'; command='xdsh';
noderange=''
args:
-s /usr/sbin/lsnim -l esus_lpp_source 2>/dev/null
nodes:
XXXXnimwext
---XDSH---
nodes='ARRAY(0x215f0df8)'; args='ARRAY(0x215e2a98)'; command='xdsh';
noderange=''
args:
-s /usr/bin/mkdir -p /install/nim/lpp_source/esus_lpp_source/RPMS/ppc; chmod
777 /install/nim/lpp_source/esus_lpp_source/RPMS/ppc; /usr/bin/mkdir -p
/install/nim/lpp_source/esus_lpp_source/installp/ppc; chmod 777
/install/nim/lpp_source/esus_lpp_source/installp/ppc; /usr/bin/mkdir -p
/install/nim/lpp_source/esus_lpp_source/emgr/ppc; chmod 777
/install/nim/lpp_source/esus_lpp_source/emgr/ppc
nodes:
XXXXnimwext
---PREXDSH---
snkey='XXXXnimwext'; rcpargs='ARRAY(0x212d2028)'; subreq='CODE(0x20eeaba8)';
---XDCP---
nodes='ARRAY(0x212d2b88)'; args='ARRAY(0x212d2028)'; command='xdcp';
noderange=''
args:
/install/nim/lpp_source/esus_lpp_source/installp/ppc
nodes:
XXXXnimwext
Can anyone help me to solve this issue?
Thank you.
Petr Gansel
------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can respond. Discussions
will include endpoint security, mobile security and the latest in malware
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user
