now i have and conserver is now being generated. /opt/freeware/sbin/conserver wasn't running. how is it started automatically under AIX?
thanks best regards Matthais Von: Guang Cheng Li <[email protected]> An: xCAT Users Mailing list <[email protected]>, Datum: 19.11.2012 03:36 Betreff: Re: [xcat-user] allow rcons from servicenode Have you set the "conserver" of the nodes to be the service node? If the conserver is set, at least the file /etc/conserver.cf should be created on the SN. Thanks, ------------------------------------------------------------------------- Li,Guang Cheng (李光成) IBM China System Technology Laboratory Email: [email protected] Address: Building 28, ZhongGuanCun Software Park, No.8, Dong Bei Wang West Road, Haidian District Beijing 100193, PRC 北京市海淀区东北旺西路8号中关村软件园28号楼 邮编: 100193 Matthias.Merk---2012-11-15 18:45:02---Hi, I'm running xcat 2.7.5 on MN and SN. i should mention that MN is linux and From: [email protected] To: xCAT Users Mailing list <[email protected]> Date: 2012-11-15 18:45 Subject: Re: [xcat-user] allow rcons from servicenode Hi, I'm running xcat 2.7.5 on MN and SN. i should mention that MN is linux and SN is AIX. On the MN all local ip addresses are in the trusted section of /etc/conserver.cf the SN doesn't have the file /etc/conserver.cf. Best Regards Matthias Merk Guang Cheng Li <[email protected]> schrieb am 15.11.2012 04:58:10: > Von: Guang Cheng Li <[email protected]> > An: xCAT Users Mailing list <[email protected]>, > Datum: 15.11.2012 04:59 > Betreff: Re: [xcat-user] allow rcons from servicenode > > HI, > > It is not recommended to run xcat command directly on service nodes, > but it should work, the latest xCAT code will add all the local ip > addresses as trusted in /etc/conserver.cf, so the /etc/conserver.cf > on SN should include all the ip addresses on SN, and rcons should work on SN. > > Which xCAT version are you using? The latest xCAT stable version is 2.7.5. > > Thanks, > ------------------------------------------------------------------------- > Li,Guang Cheng (李光成) > IBM China System Technology Laboratory > Email: [email protected] > Address: Building 28, ZhongGuanCun Software Park, > No.8, Dong Bei Wang West Road, Haidian District Beijing 100193, PRC > > 北京市海淀区东北旺西路8号中关村软件园28号楼 > 邮编: 100193 > > [Bild entfernt] Matthias.Merk---2012-11-13 17:36:20---Hi Sorry for > my late reply. Yes, i mean run the "rcons" command on the > > From: [email protected] > To: xCAT Users Mailing list <[email protected]> > Date: 2012-11-13 17:36 > Subject: Re: [xcat-user] allow rcons from servicenode > > > > Hi > > Sorry for my late reply. Yes, i mean run the "rcons" command on the > service nodes. > The problem i'm trying to solve is that certain users only have access to > the servicenode and i would like them to be able to use rpower and rcons > from the servicenode. Is this possible somehow or completely against > xcat's design :) > > Best Regards > > Matthias Merk > > Guang Cheng Li <[email protected]> schrieb am 09.11.2012 03:10:48: > > > Von: Guang Cheng Li <[email protected]> > > An: xCAT Users Mailing list <[email protected]>, > > Datum: 09.11.2012 03:12 > > Betreff: Re: [xcat-user] allow rcons from servicenode > > > > HI, > > > > When you said "get rcons working from servicenodes", do you mean run > > the "rcons" command on the service nodes? It is not recommended to > > run xCAT commands directly on service nodes. If you set up the > > conserver and servicenode attribute correctly, when you run > > makeconsercf, it will generate conserver.cf on both MN and SN, but > > on the MN, the conserver.cf has "master <conserver>" for each node, > > it means when you run rcons on the management node, it will simply > > connect the conserver on the service nodes, it will not bring in too > > much workload for the management node, all the real work will be > > done on the service nodes anyway. Does this work for you? > > > > > > Thanks, > > > ------------------------------------------------------------------------- > > Li,Guang Cheng (李光成) > > IBM China System Technology Laboratory > > Email: [email protected] > > Address: Building 28, ZhongGuanCun Software Park, > > No.8, Dong Bei Wang West Road, Haidian District Beijing 100193, > PRC > > > > 北京市海淀区东北旺西路8号中关村软件园28号楼 > > 邮编: 100193 > > > > [Bild entfernt] Matthias.Merk---2012-11-09 02:07:07---Hi All LPARs > > have a conserver defined in nodehm table and i would like to be > > > > From: [email protected] > > To: [email protected] > > Date: 2012-11-09 02:07 > > Subject: [xcat-user] allow rcons from servicenode > > > > > > > > Hi > > > > All LPARs have a conserver defined in nodehm table and i would like to > be > > able to get rcons working from servicenodes. > > How do i add servicenodes to the trusted stanza in /etc/conserver.cf so > > that they won't be removed at the next makeconservercf? > > > > TIA > > > > Best Regards > > > > Matthias Merk > > ---------------- > > Disclaimer: > > Diese Nachricht dient ausschließlich zu Informationszwecken und ist nur > > für den Gebrauch des angesprochenen Adressaten bestimmt. > > > > This message is only for informational purposes and is intended solely > for > > the use of the addressee. > > ---------------- > > > > > ------------------------------------------------------------------------------ > > Everyone hates slow websites. So do we. > > Make your web apps faster with AppDynamics > > Download AppDynamics Lite for free today: > > http://p.sf.net/sfu/appdyn_d2d_nov > > _______________________________________________ > > xCAT-user mailing list > > [email protected] > > https://lists.sourceforge.net/lists/listinfo/xcat-user > > > > > ------------------------------------------------------------------------------ > > Everyone hates slow websites. So do we. > > Make your web apps faster with AppDynamics > > Download AppDynamics Lite for free today: > > http://p.sf.net/sfu/appdyn_d2d_nov > > _______________________________________________ > > xCAT-user mailing list > > [email protected] > > https://lists.sourceforge.net/lists/listinfo/xcat-user > > ---------------- > Disclaimer: > Diese Nachricht dient ausschließlich zu Informationszwecken und ist nur > für den Gebrauch des angesprochenen Adressaten bestimmt. > > This message is only for informational purposes and is intended solely for > the use of the addressee. > ---------------- > ------------------------------------------------------------------------------ > Monitor your physical, virtual and cloud infrastructure from a single > web console. Get in-depth insight into apps, servers, databases, vmware, > SAP, cloud infrastructure, etc. Download 30-day Free Trial. > Pricing starts from $795 for 25 servers or applications! > http://p.sf.net/sfu/zoho_dev2dev_nov > _______________________________________________ > xCAT-user mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/xcat-user > ------------------------------------------------------------------------------ > Monitor your physical, virtual and cloud infrastructure from a single > web console. Get in-depth insight into apps, servers, databases, vmware, > SAP, cloud infrastructure, etc. Download 30-day Free Trial. > Pricing starts from $795 for 25 servers or applications! > http://p.sf.net/sfu/zoho_dev2dev_nov > _______________________________________________ > xCAT-user mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/xcat-user ---------------- Disclaimer: Diese Nachricht dient ausschließlich zu Informationszwecken und ist nur für den Gebrauch des angesprochenen Adressaten bestimmt. This message is only for informational purposes and is intended solely for the use of the addressee. ---------------- ------------------------------------------------------------------------------ Monitor your physical, virtual and cloud infrastructure from a single web console. Get in-depth insight into apps, servers, databases, vmware, SAP, cloud infrastructure, etc. Download 30-day Free Trial. Pricing starts from $795 for 25 servers or applications! http://p.sf.net/sfu/zoho_dev2dev_nov _______________________________________________ xCAT-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/xcat-user ------------------------------------------------------------------------------ Monitor your physical, virtual and cloud infrastructure from a single web console. Get in-depth insight into apps, servers, databases, vmware, SAP, cloud infrastructure, etc. Download 30-day Free Trial. Pricing starts from $795 for 25 servers or applications! http://p.sf.net/sfu/zoho_dev2dev_nov _______________________________________________ xCAT-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/xcat-user ---------------- Disclaimer: Diese Nachricht dient ausschließlich zu Informationszwecken und ist nur für den Gebrauch des angesprochenen Adressaten bestimmt. This message is only for informational purposes and is intended solely for the use of the addressee. ---------------- ------------------------------------------------------------------------------ Monitor your physical, virtual and cloud infrastructure from a single web console. Get in-depth insight into apps, servers, databases, vmware, SAP, cloud infrastructure, etc. Download 30-day Free Trial. Pricing starts from $795 for 25 servers or applications! http://p.sf.net/sfu/zoho_dev2dev_nov _______________________________________________ xCAT-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/xcat-user
