I'm having a problem where a nodes dhcp lease entry is loosing the
"fixed-address" line during an install. It seems to be happening during the
postscript just before the reboot. I originally thought the dhclient was
releasing it's address so I ran a tcpdump and didn't see anything going back to
the dhcp server ports (67,68).
I'm thinking it may be during the at the postscript updateflag when the xcatd
does a nodeset boot.
These are all RHEL62 with xCAT 2.7.3.
This is a sample of the dhcpd.leases entry before the install:
host hv001 {
dynamic;
hardware ethernet 98:4b:e1:0f:68:b2;
fixed-address 10.30.22.6;
supersede server.ddns-hostname = "hv001";
supersede host-name = "hv001";
if option vendor-class-identifier = "ScaleMP" {
supersede server.filename = "vsmp/pxelinux.0";
} else {
supersede server.filename = "pxelinux.0";
}
supersede server.next-server = 0a:1e:16:0f;
}
The line "fixed-address 10.30.22.6;" is missing after the install and before
postbootscripts is run.
Any help would be appreciated.
Mark Frenette
[email protected]
------------------------------------------------------------------------------
LogMeIn Rescue: Anywhere, Anytime Remote support for IT. Free Trial
Remotely access PCs and mobile devices and provide instant support
Improve your efficiency, and focus on delivering more value-add services
Discover what IT Professionals Know. Rescue delivers
http://p.sf.net/sfu/logmein_12329d2d
_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user
