We’ll try 2.8 as soon as its available. Thanks. From: Pocina, Goran Sent: Wednesday, February 13, 2013 4:33 PM To: xCAT Users Mailing list Subject: Re: [xcat-user] getpostscript.awk returns no postscripts
Ah, is that the problem? Our site table contains the “nyc” domain, and we have problems running postscripts when the node being installed is in the “en” domain: [root@drdkvm0003 xcat]# tabdump site | grep domain "domain","nyc.desres.deshaw.com",, We assumed we could support multiple domains with a single MN by using the networks table. Do we need separate MNs for each domain? From: Lissa Valletta [mailto:[email protected]] Sent: Wednesday, February 13, 2013 4:01 PM To: xCAT Users Mailing list Subject: Re: [xcat-user] getpostscript.awk returns no postscripts What is the domain in the site.domain table. It should be en.desres.deshaw.com based on the name of your node. The getpostscripts.awk, is a request from the node to the management node. There is a validation of the domain. I do notice in your networks table you have two domains defined. We only support one domain name in the xCAT cluster, until xCAT 2.8. nyc.desres.deshaw.com en.desres.deshaw.com Lissa K. Valletta 8-3/B10 Poughkeepsie, NY 12601 (tie 293) 433-3102 [Inactive hide details for "Pocina, Goran" ---02/13/2013 02:43:07 PM---Hi, getpostscript.awk returns no postscripts during diskf]"Pocina, Goran" ---02/13/2013 02:43:07 PM---Hi, getpostscript.awk returns no postscripts during diskfull installing CentOS 6 nodes on different From: "Pocina, Goran" <[email protected]<mailto:[email protected]>> To: "'xCAT Users Mailing list'" <[email protected]<mailto:[email protected]>> Date: 02/13/2013 02:43 PM Subject: [xcat-user] getpostscript.awk returns no postscripts ________________________________ Hi, getpostscript.awk returns no postscripts during diskfull installing CentOS 6 nodes on different network from the MN. The problem node (drdkvm0101.en…) installs, /xcatpost is created and populated, but no postscripts are run. Investigation yields the following message from drdxcatmn:/var/log/messages: Feb 13 13:47:20 drdxcatmn xCAT: xCAT: Allowing getpostscript from drdkvm0101.en.desres.deshaw.com Feb 13 13:47:20 drdxcatmn xCAT: Received getpostscript from , which couldn't be correlated to a node (domain mismatch?) Normally getpostscript.awk returns a list of all postscripts configured for the node. For this one node getpostscript.awk brings xml back, but no postscripts. export MASTER_IP="149.77.53.252" export MASTER_IPS="149.77.53.252" export MASTER="149.77.53.252" export INSTALLDIR=/install i="149.77.53.252" export XCATSERVER=$i:3001 export USEOPENSSLFORXCAT=1 /xcatpost/getpostscript.awk <xcatresponse> <serverdone></serverdone> </xcatresponse> Here are the network settings for the MN node network (drdxcatmn.nyc.mydomain.com) and the problem node network (drdkvm0101.en.mydomain.com.) Postscripts do run when we’re installing nodes on the MN network. [root@drdxcatmn log]# lsdef -t network 149_77_52_0-255_255_254_0 Object name: 149_77_52_0-255_255_254_0 ddnsdomain=nyc.desres.deshaw.com domain=nyc.desres.deshaw.com dynamicrange=149.77.53.132-149.77.53.191 gateway=149.77.52.10 mask=255.255.254.0 mgtifname=!remote! nameservers=149.77.52.53,149.77.52.35,10.232.15.130 net=149.77.52.0 ntpservers=149.77.52.24,149.77.52.41,149.77.52.138,149.77.52.129 tftpserver=149.77.53.252 [root@drdxcatmn log]# lsdef -t network 10_232_4_0-255_255_252_0 Object name: 10_232_4_0-255_255_252_0 ddnsdomain=en.desres.deshaw.com dhcpserver=149.77.53.252 domain=en.desres.deshaw.com gateway=10.232.4.1 mask=255.255.252.0 mgtifname=!remote! nameservers=10.232.15.128,10.232.15.130 net=10.232.4.0 ntpservers=10.232.15.0,10.232.15.2,10.232.15.4,10.232.15.117,10.232.24.44 tftpserver=149.77.53.252 usercomment=storage network Any suggestions on how to get more debugging information on this problem? Thanks------------------------------------------------------------------------------ Free Next-Gen Firewall Hardware Offer Buy your Sophos next-gen firewall before the end March 2013 and get the hardware for free! Learn more. http://p.sf.net/sfu/sophos-d2d-feb_______________________________________________ xCAT-user mailing list [email protected]<mailto:[email protected]> https://lists.sourceforge.net/lists/listinfo/xcat-user
<<inline: image001.gif>>
------------------------------------------------------------------------------ Free Next-Gen Firewall Hardware Offer Buy your Sophos next-gen firewall before the end March 2013 and get the hardware for free! Learn more. http://p.sf.net/sfu/sophos-d2d-feb
_______________________________________________ xCAT-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/xcat-user
