Hello, I have commented out the domain-search lines and restarted dhcpd, I could then run makedhcpd -a, it did change the content of /var/lib/dhcpd/dhcpd.leases, but did not solve the problem.
I have removed atftpd and installed tftp-server so that xcatd could start properly. I localy tested tftp to make sure tftpd was running properly. I tested it from a compute node as well. The node does properly do a PXE boot, but it does not go all the way. BootOrder is : Legacy Only CD/DVD Rom Floppy Disk PXE Network Hard Disk 0 hpc1A620c# ./asu64 show BootOrder IBM Advanced Settings Utility version 3.70.72L Licensed Materials - Property of IBM (C) Copyright IBM Corp. 2007-2011 All Rights Reserved Successfully discovered the IMM via SLP. Discovered IMM at IP address 169.254.95.118 Connected to IMM at IP address 169.254.95.118 BootOrder.BootOrder=Legacy Only=CD/DVD Rom=Floppy Disk=PXE Network=Hard Disk 0 BootOrder.WolBootOrder=PXE Network=Floppy Disk=CD/DVD Rom=Hard Disk 0 hpc1A620c# I now have an extra message when tftp retrieves the file but still no install and blank screen once the dhcpd server receives the DHCPACK for the installation address. Note, the mask on the admin network is 255.255.252.0 so the xCAT server 10.252.7.204 is in the same VLAN as the compute node I am trying to add 10.252.5.20. Apr 25 17:56:57 hpc1A004a dhcpd: DHCPDISCOVER from 5c:f3:fc:49:2e:f0 via eth4 Apr 25 17:56:57 hpc1A004a dhcpd: DHCPOFFER on 10.252.5.20 to 5c:f3:fc:49:2e:f0 via eth4 Apr 25 17:57:01 hpc1A004a dhcpd: DHCPREQUEST for 10.252.5.20 (10.252.7.204) from 5c:f3:fc:49:2e:f0 via eth4 Apr 25 17:57:01 hpc1A004a dhcpd: DHCPACK on 10.252.5.20 to 5c:f3:fc:49:2e:f0 via eth4 Apr 25 17:57:01 hpc1A004a in.tftpd[24175]: RRQ from 10.252.5.20 filename xcat/xnba.kpxe Apr 25 17:57:01 hpc1A004a in.tftpd[24175]: tftp: client does not accept options Apr 25 17:57:01 hpc1A004a in.tftpd[24176]: RRQ from 10.252.5.20 filename xcat/xnba.kpxe Apr 25 17:57:01 hpc1A004a dhcpd: DHCPDISCOVER from 5c:f3:fc:49:2e:f0 via eth4 Apr 25 17:57:01 hpc1A004a dhcpd: DHCPOFFER on 10.252.5.20 to 5c:f3:fc:49:2e:f0 via eth4 Apr 25 17:57:01 hpc1A004a dhcpd: DHCPREQUEST for 10.252.5.20 (10.252.7.204) from 5c:f3:fc:49:2e:f0 via eth4 Apr 25 17:57:01 hpc1A004a dhcpd: DHCPACK on 10.252.5.20 to 5c:f3:fc:49:2e:f0 via eth4 With my bootorder rsetboot is not needed. If I use it the pxe boot is not Legacy anymore, any way it does not install either but does not go to disk either, it remains hung. Where can I look ? How can I increase verbosity ? Thank you for your help. Best regards, Antoine Tabary 17 Avenue De L'europe Certified HPC I/T Specialist Bois Colombes Cedex, 92275 6520AA France ITS e-mail: [email protected] __________________ Hello, My hardware is a cluster of x3550 M3 running RHEL5.5. x3550 M4 nodes are to be added soon which explains the migration they'll be installed with RedHat 6. In order to be ready we decided to migrate the current xCAT server from 2.5.1 to 2.8. It is currently running RHEL 5.5. makedhcp -n ran, but dhcpd service will not start anymore now : Apr 25 15:50:24 hpc1A004a dhcpd: Internet Systems Consortium DHCP Server V3.0.5-RedHat Apr 25 15:50:24 hpc1A004a dhcpd: Copyright 2004-2006 Internet Systems Consortium. Apr 25 15:50:24 hpc1A004a dhcpd: All rights reserved. Apr 25 15:50:24 hpc1A004a dhcpd: For info, please visit http://www.isc.org/sw/dhcp/ Apr 25 15:50:24 hpc1A004a dhcpd: /etc/dhcpd.conf line 43: unknown option dhcp.domain-search Apr 25 15:50:24 hpc1A004a dhcpd: option domain-search "hpcrenault" Apr 25 15:50:24 hpc1A004a dhcpd: ^ Apr 25 15:50:24 hpc1A004a dhcpd: /etc/dhcpd.conf line 72: unknown option dhcp.domain-search Apr 25 15:50:24 hpc1A004a dhcpd: option domain-search "hpcrenault" Apr 25 15:50:24 hpc1A004a dhcpd: ^ Apr 25 15:50:24 hpc1A004a dhcpd: /etc/dhcpd.conf line 101: unknown option dhcp.domain-search Apr 25 15:50:24 hpc1A004a dhcpd: option domain-search "hpcrenault" Apr 25 15:50:24 hpc1A004a dhcpd: ^ Apr 25 15:50:24 hpc1A004a dhcpd: /etc/dhcpd.conf line 133: unknown option dhcp.domain-search Apr 25 15:50:24 hpc1A004a dhcpd: option domain-search "hpcrenault" Apr 25 15:50:24 hpc1A004a dhcpd: ^ Apr 25 15:50:24 hpc1A004a dhcpd: /etc/dhcpd.conf line 164: unknown option dhcp.domain-search Apr 25 15:50:24 hpc1A004a dhcpd: option domain-search "hpcrenault" Apr 25 15:50:24 hpc1A004a dhcpd: ^ Apr 25 15:50:24 hpc1A004a dhcpd: /etc/dhcpd.conf line 195: unknown option dhcp.domain-search Apr 25 15:50:24 hpc1A004a dhcpd: option domain-search "hpcrenault" Apr 25 15:50:24 hpc1A004a dhcpd: ^ ... Thank you for your help. Best regards, Antoine Tabary 17 Avenue De L'europe Certified HPC I/T Specialist Bois Colombes Cedex, 92275 6520AA France ITS e-mail: [email protected] Sauf indication contraire ci-dessus:/ Unless stated otherwise above: Compagnie IBM France Siège Social : 17 avenue de l'Europe, 92275 Bois-Colombes Cedex RCS Nanterre 552 118 465 Forme Sociale : S.A.S. Capital Social : 653.242.306,20 ? SIREN/SIRET : 552 118 465 03644 - Code NAF 6202A
<<image/gif>>
<<image/gif>>
------------------------------------------------------------------------------ Try New Relic Now & We'll Send You this Cool Shirt New Relic is the only SaaS-based application performance monitoring service that delivers powerful full stack analytics. Optimize and monitor your browser, app, & servers with just a few lines of code. Try New Relic and get this awesome Nerd Life shirt! http://p.sf.net/sfu/newrelic_d2d_apr
_______________________________________________ xCAT-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/xcat-user
