I suppose I'll need to retract my statement that it's 100% reproducible, we had a few systems succeed in the last couple of weeks but today we had another failure. As suspected, the "Ip Address Source" read "Other" instead of "Static". I'll experiment with another failure (assuming i can get another failure today) and see if this is actually an xcat issue or a IMM2 issue.
On Thu, Apr 18, 2013 at 8:52 AM, William Woodford <[email protected]>wrote: > I believe I see the code blocks you're referring to (lines 107 and 116 in > the bmcsetup script). I'll drop some debug statements there and allow the > process to fail and see if I can confirm that ipsrc static isn't taking. > > > On Tue, Apr 16, 2013 at 2:17 PM, Jarrod B Johnson <[email protected]>wrote: > >> what version of IMM? Is this 100% reproducible? >> >> My guess would be that for whatever reason, the ipsrc static didn't take >> but reported success. We could workaround this (and perhaps should) by >> putting 'ipsrc static' and 'ipaddr ' inside the same retry loop. >> >> [image: Inactive hide details for William Woodford ---04/16/2013 01:56:19 >> PM---Greetings all, Last fall we received 480 ibm dx360m4's (]William >> Woodford ---04/16/2013 01:56:19 PM---Greetings all, Last fall we received >> 480 ibm dx360m4's (2u chassis) and upgraded to xCAT >> >> From: William Woodford <[email protected]> >> To: xCAT Users Mailing list <[email protected]> >> Date: 04/16/2013 01:56 PM >> Subject: [xcat-user] bmcsetup fails in xCAT 2.7.3 >> ------------------------------ >> >> >> >> Greetings all, >> >> Last fall we received 480 ibm dx360m4's (2u chassis) and upgraded to xCAT >> 2.7.3 to support them. With the initial rev of the imm and uefi, discovery >> and bmcsetup worked with no issues. Sometime after we upgraded the imm and >> uefi to support the Intel Xeon Phi's we noticed an issue. Nodes will >> discover fine, but bmcsetup always fails on the first attempt. >> >> If, after the node is discovered, we set nodeset rncmd=bmcsetup, that >> always seems to work. >> >> When bmcsetup fails, the following output is always seen at the console: >> >> Setting LAN IP Address to XXX.XXX.XXX.XXX >> LAN Parameter Data does not match! Write may have failed. >> >> This message will repeat for a long while (I've never let if go more than >> 10-15 minutes). Any help would be greatly appreciated. I'll be happy to >> povide any info that may help lead to a solution. Thanks! >> >> -- >> Bill Woodford* >> * >> *[email protected]* <[email protected]> >> ------------------------------------------------------------------------------ >> Precog is a next-generation analytics platform capable of advanced >> analytics on semi-structured data. The platform includes APIs for building >> apps and a phenomenal toolset for data science. Developers can use >> our toolset for easy data analysis & visualization. Get a free account! >> http://www2.precog.com/precogplatform/slashdotnewsletter >> _______________________________________________ >> xCAT-user mailing list >> [email protected] >> https://lists.sourceforge.net/lists/listinfo/xcat-user >> >> >> >> ------------------------------------------------------------------------------ >> Precog is a next-generation analytics platform capable of advanced >> analytics on semi-structured data. The platform includes APIs for building >> apps and a phenomenal toolset for data science. Developers can use >> our toolset for easy data analysis & visualization. Get a free account! >> http://www2.precog.com/precogplatform/slashdotnewsletter >> _______________________________________________ >> xCAT-user mailing list >> [email protected] >> https://lists.sourceforge.net/lists/listinfo/xcat-user >> >> > > > -- > Bill Woodford > [email protected] > -- Bill Woodford [email protected]
<<graycol.gif>>
------------------------------------------------------------------------------ Introducing AppDynamics Lite, a free troubleshooting tool for Java/.NET Get 100% visibility into your production application - at no cost. Code-level diagnostics for performance bottlenecks with <2% overhead Download for free and get started troubleshooting in minutes. http://p.sf.net/sfu/appdyn_d2d_ap1
_______________________________________________ xCAT-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/xcat-user
