I'm installing CentOS 6.3 onto four HP SL250s via xcat. This
xcat server (2.6.10) is working to install several other nodes.
On these HPs however, when they PXE boot, and get xcat's direction
to just boot from disk, they fail in one of two different methods
shown below. When the nodes boot directly from hdd, they boot
fine, through grub as expected.
I'm not sure what I'm missing.
Here's the /tftpboot/pxelinux.cfg file the nodes get when in
"nodeset <node> boot" state:
#boot
DEFAULT xCAT
LABEL xCAT
LOCALBOOT 0
PXE boot from disk halts at one of these spots:
1)
MXE-M0F: Exiting Intel Boot Agent.
2)
Illegal OpCode
EAX=0000693B EBX=00000001 ECX=0000009D EDX=00005B84
EBP=0000FBDC ESI=00000000 EDI=0000FFFF
DS=0000 ES=0000 FS=0000 GS=0000
CS:EIP=0000:00000007 SS:ESP=F09A:0000F096
EFLAGS=00000002
Thanks for any help.
--
John Griffin-Wiesner
HPC Systems Administrator
Minnesota Supercomputing Institute
http://www.msi.umn.edu
[email protected]
------------------------------------------------------------------------------
AlienVault Unified Security Management (USM) platform delivers complete
security visibility with the essential security capabilities. Easily and
efficiently configure, manage, and operate all of your security controls
from a single console and one unified framework. Download a free trial.
http://p.sf.net/sfu/alienvault_d2d
_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user
