Hi Xiao,
If you look at the lsdef, you will see that I have set the IP
address of the bmc, or does the type need to be different?
# lsdef node001 | grep bmc
nichostnamesuffixes.bmc=-bmc
nicips.bmc=10.0.1.1
nicnetworks.bmc=xcat_nw
nictypes.bmc=ipmi
regards,
Arif Ali MBCS
Senior HPC Technical Architect
OCF plc
Tel: +44
(0)114 257 2200
Mob: +44
(0)7970 148 122
Fax: +44
(0)114 257 0022
Web: www.ocf.co.uk
Blog: blog.ocf.co.uk
Twitter: @ocfplc
Please note, any emails relating to an OCF Support request
must always be sent to [email protected]
for a ticket number to be generated or existing support ticket
to be updated. Should this not be done then OCF cannot be held
responsible for requests not dealt with in a timely manner.
OCF plc is a company registered in England and Wales.
Registered
number 4132533, VAT number GB 780 6803 14. Registered office
address: OCF plc, 5 Rotunda Business Centre, Thorncliffe Park,
Chapeltown, Sheffield, S35 2PG.
This message is private and confidential. If you have received
this message in error, please notify us and remove it from
your system.
On 16/05/13 15:24, Xiao Peng Wang wrote:
Arif,
I think the problem was you did
not assign IP for the bmc. The ip you set the in nics table
only for the host. If you add the entry in the hosts table for
the ip of bmc, it would work.
Thanks
Best Regards
----------------------------------------------------------------------
Wang Xiaopeng (王晓朋)
IBM China System Technology Laboratory
Tel: 86-10-82453455
Email: [email protected]
Address: 28,ZhongGuanCun Software Park,No.8 Dong Bei Wang West
Road, Haidian District Beijing P.R.China 100193
 Arif Ali ---2013/05/15 20:51:33---Hi team, I
am trying to get the sequential discovery working on a 4 node
cluster,
From: Arif Ali <[email protected]>
To: <[email protected]>,
Date: 2013/05/15 20:51
Subject: [xcat-user] sequential discovery
issue
Hi team,
I am trying to get the sequential discovery working on a 4 node
cluster, and I am struggling to get passed the following error
message, and trying to understand where I am going wrong
May 15 15:46:09 mgmt1 xCAT: xcatd: Processing discovery request
from 10.0.0.101
May 15 15:46:09 mgmt1 xCAT: Sequential Discovery: Processing
May 15 15:46:10 mgmt1 xCAT: Sequential Discovery: Auto Stopped
because all bmc ips in the specified range have been assigned to
discovered nodes. Run 'nodediscoverls -t seq' to display the
discovery result.
I started the discover by running the following command
# nodediscoverstart noderange=node00[1-4]
Below is my definition of the node itself.
# lsdef node001
Object name: node001
bmc=node001-bmc
chain=runcmd=bmcsetup,shell
cons=ipmi
groups=compute,ipmi
ip=10.0.0.1
mgt=ipmi
netboot=xnba
nichostnamesuffixes.bmc=-bmc
nichostnamesuffixes.ib0=-ib0
nicips.bmc=10.0.1.1
nicips.ib0=10.0.2.1
nicnetworks.bmc=xcat_nw
nicnetworks.ib0=xcat_ib
nictypes.bmc=ipmi
nictypes.ib0=infiniband
_ondiscover_=nodediscover
postbootscripts=otherpkgs
postscripts=syslog,remoteshell,syncfiles
power=ipmi
serialport=0
serialspeed=19200
I would expect xCAT to grab the IP from the defined IPs in the
nics table, and assign this IP.
I have then since realised, the following command works
# nodediscoverstart noderange=node00[1-4] groups=compute,ipmi
bmciprange=10.0.1.1-10.0.1.4
Which is I think inefficient, especially everything is already
defined in the xCAT database
--
regards,
Arif Ali MBCS
Senior HPC Technical Architect
OCF plc
Tel: +44 (0)114 257 2200
Mob: +44 (0)7970 148 122
Fax: +44 (0)114 257 0022
Web: www.ocf.co.uk
Blog: blog.ocf.co.uk
Twitter: @ocfplc
Please note, any emails relating to an OCF Support request must
always be sent to [email protected] for a ticket number to be generated or existing
support ticket to be updated. Should this not be done then OCF
cannot be held responsible for requests not dealt with in a
timely manner.
OCF plc is a company registered in England and Wales. Registered
number 4132533, VAT number GB 780 6803 14. Registered office
address: OCF plc, 5 Rotunda Business Centre, Thorncliffe Park,
Chapeltown, Sheffield, S35 2PG.
This message is private and confidential. If you have received
this message in error, please notify us and remove it from your
system. [附件 "aali.vcf" 被 Xiao Peng Wang/China/IBM 删除]------------------------------------------------------------------------------
AlienVault Unified Security Management (USM) platform delivers
complete
security visibility with the essential security capabilities.
Easily and
efficiently configure, manage, and operate all of your
security controls
from a single console and one unified framework. Download a
free trial.
http://p.sf.net/sfu/alienvault_d2d_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user
|
