Hi,
I upgraded from 2.7.7 to 2.8.1 yesterday, since which provisioning of
kvm vms using xnba seems to have stopped working. I'm attempting to put
a disk image on them with
nodeset vm10 osimage=rhels6.2-x86_64-install-vm
rpower vm10 on
If I display the console in wcons it gets xcat/xnba.kpxe via tftp then
appears to start it - the last thing I see is
PXE->EB: !PXE at 9BF7:0710, entry point at 9BF7:0397
UDNI code segment 9FB7:07A6, data segment 9C72:2CD8 (623-37kB)
UDNI device is PCI 00:03.0 type gPXE
623kB free base memory after PXE unload
after which nothing happens.
If I change the netboot method to "pxe" if works as expected. I'm
struggling to think what would have changed - the only thing I can think
of is the way the dhcp leases are getting set up. Here's an example if
it's any help:
host vm10 {
dynamic;
hardware ethernet 42:61:0a:0e:50:15;
fixed-address 10.14.80.21;
supersede server.ddns-hostname = "vm10";
supersede host-name = "vm10";
if option user-class-identifier = "xNBA" and option
client-architecture = 00:00 {
supersede server.always-broadcast = 01;
supersede server.filename =
"http://${next-server}/tftpboot/xcat/xnba/nodes/vm10";;
} elsif option user-class-identifier = "xNBA" and option
client-architecture = 00:09 {
supersede server.filename =
"http://${next-server}/tftpboot/xcat/xnba/nodes/vm10.uefi";;
} elsif option client-architecture = 00:07 {
supersede server.filename = "xcat/xnba.efi";
} elsif option client-architecture = 00:00 {
supersede server.filename = "xcat/xnba.kpxe";
} else {
supersede server.filename = "";
}
}
Provisioning physical hosts appears to be OK although I've only tried
one.
I'm not sure what else to try - does anyone have any ideas?
Rob
------------------------------------------------------------------------------
This SF.net email is sponsored by Windows:
Build for Windows Store.
http://p.sf.net/sfu/windows-dev2dev
_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user
