I assume you are running nodeset compute084 osimage=mycomputeimage Lissa K. Valletta 8-3/B10 Poughkeepsie, NY 12601 (tie 293) 433-3102
From: Michael Robbert <mrobb...@mines.edu> To: <xcat-user@lists.sourceforge.net>, Date: 08/08/2013 03:30 PM Subject: Re: [xcat-user] New nodes not deploying Didn't work. I recreated dhcp with those commands. I had run makedhcp before, but probably not with -n. The nodes are and were showing up in the leases file so that didn't appear to be the problem. I also made some changes to the nodehm table so that the serial attributes are showing up on the new nodes. Still nodeset runs without error, but doesn't change the tftp config file for the node. I'm just not sure how to debug this. It is just failing silently. Thanks for any tips, Mike On 8/8/13 5:16 AM, Lissa Valletta wrote: > Thanks for all the good information! > > Did you run makedhcp -a to pick up the new nodes . Also you will need > to run makeconservercf to pick up the new nodes. > You might need to run makedhcp -n followed by makedhcp -a. > > Also these attributes are missing in the new nodes > serialflow=hard > serialport=0 > serialspeed=115200 > > > Lissa K. Valletta > 8-3/B10 > Poughkeepsie, NY 12601 > (tie 293) 433-3102 > > > > Inactive hide details for Michael Robbert ---08/07/2013 06:30:05 > PM---I've got a small test cluster with working stateless nodeMichael > Robbert ---08/07/2013 06:30:05 PM---I've got a small test cluster with > working stateless nodes. Recently I tried to add 2 more nodes an > > From: Michael Robbert <mrobb...@mines.edu> > To: <xcat-user@lists.sourceforge.net>, > Date: 08/07/2013 06:30 PM > Subject: [xcat-user] New nodes not deploying > > ------------------------------------------------------------------------ > > > > I've got a small test cluster with working stateless nodes. Recently I > tried to add 2 more nodes and I can't get them to deploy the same > stateless image. For some reason the tftp configuration files are > getting touched when I run nodeset, but not changed to point to the > correct boot images. They are staying with genesis boot images. > I have tried various incarnations of nodeadd and nodediscover, always > followed by a nodeset $nodename osimage=mycomputeimage > The nodeset command will change /tftpboot/xcat/xnba/nodes/$nodename file > for the working nodes and it updates the timestamp for the non-working > nodes, but the file still points to the genesis boot images. Am I > missing a step? > > Here is my setup. > xCAT server: > > [root@mgmt nodes]# cat /etc/redhat-release > CentOS release 6.4 (Final) > > [root@mgmt nodes]# rpm -qa|grep -i xcat > ipmitool-xcat-1.8.11-3.x86_64 > xCAT-buildkit-2.8.2-snap201307222332.noarch > xCAT-UI-2.8.2-snap201307222329.noarch > yaboot-xcat-1.3.17-rc1.noarch > xCAT-client-2.8.2-snap201307222328.noarch > xCAT-2.8.2-snap201307222333.x86_64 > xCAT-genesis-base-x86_64-2.8-snap201305300347.noarch > perl-xCAT-2.8.2-snap201307222328.noarch > conserver-xcat-8.1.16-10.x86_64 > xCAT-UI-deps-2.8-2.noarch > syslinux-xcat-3.86-2.noarch > xCAT-genesis-scripts-x86_64-2.8.2-snap201307222333.noarch > elilo-xcat-3.14-4.noarch > openslp-xcat-1.2.1-1.x86_64 > xCAT-server-2.8.2-snap201307222328.noarch > > [root@mgmt nodes]# lsdef -t osimage mycomputeimage > Object name: mycomputeimage > exlist=/install/custom/netboot/centos/compute.exlist > imagetype=linux > osarch=x86_64 > osname=Linux > osvers=centos6.3 > otherpkgdir=/install/post/otherpkgs/centos6.3/x86_64 > otherpkglist=/install/custom/netboot/centos/compute.otherpkgs.pkglist > permission=755 > pkgdir=/install/centos6.3/x86_64 > pkglist=/install/custom/netboot/centos/compute.pkglist > postbootscripts=configiba > postinstall=/install/custom/netboot/centos/compute.postinstall > postscripts=configiba,syncfiles > profile=compute > provmethod=netboot > rootimgdir=/install/netboot/centos6.3/x86_64/compute > synclists=/install/custom/netboot/centos/compute.synclist > > This is a previously configured and currently working node: > [root@mgmt nodes]# lsdef compute004 > Object name: compute004 > arch=x86_64 > bmc=compute004-bmc > bmcport=0 > chain=runcmd=standby > cons=ipmi > currstate=netboot centos6.3-x86_64-compute > groups=compute,ipmi,all > initrd=xcat/osimage/mycomputeimage/initrd-stateless.gz > installnic=eth0 > ip=172.17.8.4 > > kcmdline=imgurl=http://172.17.0.1:80//install/netboot/centos6.3/x86_64/compute/rootimg.gz > > XCAT=!myipfn!:3001 NODE=compute004 ifname=eth0:00:30:48:f2:87:c4 > netdev=eth0 console=tty0 console=ttyS0,115200n8r > kernel=xcat/osimage/mycomputeimage/kernel > mac=00:30:48:f2:87:c4 > mgt=ipmi > netboot=xnba > nfsserver=172.17.0.1 > nodetype=osi > ondiscover=nodediscover > os=centos6.3 > otherinterfaces=compute004-bmc:172.17.32.4 > postbootscripts=otherpkgs,setroute > > postscripts=syslog,remoteshell,syncfiles,setupntp,addexternalyum,configiba,orangefs,setroute > power=ipmi > primarynic=eth0 > profile=compute > provmethod=mycomputeimage > routenames=ct_gc,ct_gc_eth > serialflow=hard > serialport=0 > serialspeed=115200 > status=failed > statustime=08-05-2013 16:49:52 > tftpserver=172.17.0.1 > updatestatus=synced > updatestatustime=07-29-2013 15:36:16 > > This is one of the new nodes that isn't working: > [root@mgmt nodes]# lsdef compute084 > Object name: compute084 > arch=x86_64 > chain=runcmd=standby > currchain=runcmd=standby > currstate=runcmd=standby > groups=compute > initrd=xcat/genesis.fs.x86_64.lzma > installnic=eth0 > ip=172.17.8.84 > kcmdline=quiet xcatd=172.17.0.1:3001 destiny=runcmd=standby > kernel=xcat/genesis.kernel.x86_64 > mac=00:25:90:19:92:52 > mgt=ipmi > netboot=xnba > nfsserver=172.17.0.1 > nodetype=osi > ondiscover=nodediscover > os=centos6.3 > otherinterfaces=compute084-bmc:172.17.32.84 > postbootscripts=otherpkgs,setroute > > postscripts=syslog,remoteshell,syncfiles,setupntp,addexternalyum,configiba,orangefs,setroute > primarynic=eth0 > profile=compute > provmethod=mycomputeimage > routenames=ct_gc,ct_gc_eth > serial=P1715140 > status=booting > statustime=08-07-2013 14:43:40 > supportedarchs=x86,x86_64 > switch=Binary file (standard input) matches > switchport=Binary file (standard input) matches > tftpserver=172.17.0.1 > > Let me know what else you want to see. > > Thanks, > Mike Robbert > Colorado School of Mines > > /(See attached file: > smime.p7s)/------------------------------------------------------------------------------ > Get 100% visibility into Java/.NET code with AppDynamics Lite! > It's a free troubleshooting tool designed for production. > Get down to code-level detail for bottlenecks, with <2% overhead. > Download for free and get started troubleshooting in minutes. > http://pubads.g.doubleclick.net/gampad/clk?id=48897031&iu=/4140/ostg.clktrk_______________________________________________ > xCAT-user mailing list > xCAT-user@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/xcat-user > > > > ------------------------------------------------------------------------------ > Get 100% visibility into Java/.NET code with AppDynamics Lite! > It's a free troubleshooting tool designed for production. > Get down to code-level detail for bottlenecks, with <2% overhead. > Download for free and get started troubleshooting in minutes. > http://pubads.g.doubleclick.net/gampad/clk?id=48897031&iu=/4140/ostg.clktrk > > > > _______________________________________________ > xCAT-user mailing list > xCAT-user@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/xcat-user > (See attached file: smime.p7s) ------------------------------------------------------------------------------ Get 100% visibility into Java/.NET code with AppDynamics Lite! It's a free troubleshooting tool designed for production. Get down to code-level detail for bottlenecks, with <2% overhead. Download for free and get started troubleshooting in minutes. http://pubads.g.doubleclick.net/gampad/clk?id=48897031&iu=/4140/ostg.clktrk _______________________________________________ xCAT-user mailing list xCAT-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xcat-user
<<inline: graycol.gif>>
smime.p7s
Description: Binary data
------------------------------------------------------------------------------ Get 100% visibility into Java/.NET code with AppDynamics Lite! It's a free troubleshooting tool designed for production. Get down to code-level detail for bottlenecks, with <2% overhead. Download for free and get started troubleshooting in minutes. http://pubads.g.doubleclick.net/gampad/clk?id=48897031&iu=/4140/ostg.clktrk
_______________________________________________ xCAT-user mailing list xCAT-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xcat-user
