Hi, please check "udev: renamed network interface eth0 to em1" network interface eth0 is being renamed to em1 , i guess you need to check this 1st, Thanks
Date: Sat, 29 Mar 2014 22:17:48 -0400 From: [email protected] To: [email protected] Subject: [xcat-user] Unable to install stateless image - installation hangs after detecting the 10gb network card (bnx2x) Hello, We are trying to push a stateless image on a Dell PE-M420 Blade server but the installation hangs after detecting our 10gb network interface (bnx2x).We use xcat version 2.8 On the logs the image is pushed successfully and stops here:Mar 29 21:46:42 xxxx in.tftpd[7688]: RRQ from 192.168.248.96 filename pxelinux.0 Mar 29 21:46:42 xxxx in.tftpd[7689]: RRQ from 192.168.248.96 filename pxelinux.cfg/44454c4c-4400-1054-8037-c3c04f355931 Mar 29 21:46:42 xxxx in.tftpd[7690]: RRQ from 192.168.248.96 filename pxelinux.cfg/01-74-86-7a-a6-d7-0f Mar 29 21:46:42 xxxx in.tftpd[7691]: RRQ from 192.168.248.96 filename pxelinux.cfg/C0A8F860 Mar 29 21:46:42 xxxx in.tftpd[7692]: RRQ from 192.168.248.96 filename xcat/osimage/rhels6.5-x86_64-netboot-compute/kernel Mar 29 21:46:42 xxxx in.tftpd[7693]: RRQ from 192.168.248.96 filename xcat/osimage/rhels6.5-x86_64-netboot-compute/initrd-stateless.gz See attached screen shot from console showing where it hangs. We are trying to install RHEL6.5 64bit OS. Has anyone run into this problem and have any suggestions to fix the issue? Thanks! ------------------------------------------------------------------------------ _______________________________________________ xCAT-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/xcat-user
------------------------------------------------------------------------------
_______________________________________________ xCAT-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/xcat-user
