Does that mean that until 2.8.5, basically sysclone does not, for all intents and purposes, actually function to clone RHEL servers? If it cannot run pvcreate, etc., it cannot create the file systems . . .
Is there any way to update the genesis image to include those commands to make sysclone work? From: Wei Hua WH Hu [mailto:huwei...@cn.ibm.com] Sent: Wednesday, April 02, 2014 11:42 PM To: xcat-user@lists.sourceforge.net; Engdahl, Rod Subject: Re: [xcat-user] Sysclone: Genesis Image missing commands (pvcreate, lvcreate, etc.) Genesis Image does miss commands (pvcreate, lvcreate, etc.), I have open a defect to track this issue. defect number is 4039. Hi Engdahl, We plan to fix this issue at xcat 2.8.5 (maybe ahead this plan, You could pay attention to the status of defect#4039)Thanks. Best Regards! -------------------------------------------------------------- Hu, Wei Hua (胡卫华) IBM China System Technology Laboratory Email: huwei...@cn.ibm.com<mailto:huwei...@cn.ibm.com> Tel: 86-10-82453253 Address: Building 28, ZhongGuanCun Software Park, No.8, Dong Bei Wang West Road, Haidian District Beijing 100193, PRC 北京市海淀区东北旺西路8号中关村软件园28号楼 邮编: 100193 From: "Engdahl, Rod" <engd...@visa.com<mailto:engd...@visa.com>> To: "xcat-user@lists.sourceforge.net<mailto:xcat-user@lists.sourceforge.net>" <xcat-user@lists.sourceforge.net<mailto:xcat-user@lists.sourceforge.net>>, Date: 04/02/2014 11:03 PM Subject: [xcat-user] Sysclone: Genesis Image missing commands (pvcreate, lvcreate, etc.) ________________________________ xCAT 2.8.3, RHEL 6.4 I installed systemimage-server on our xcat server, and systemimage-client on a target node and ran: imcapture <sourcenode> -t sysclone <imagename> After this command did its thing and populated the appropriate /install directories, I ran: nodeset <targetnode> osimage=<imagename> rsetboot <targetnode> net rpower <targetnode> reset Things appeared to go swimmingly for a while, but as the Genesis image was executing /scripts/sl73caeapp30-image.master, the script died a horrible death because things like pvcreate were not in the Genesis image that was supposed to be setting up the file systems. Ending several lines of output from the running of /scripts/sl73caeapp30-image.master: __________________________________________ New partition table for /dev/sda: parted -s -- /dev/sda print Model: IBM ServeRAID M5015 (scsi) Disk /dev/sda: 36.0TB Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags 1 17.4kB 105MB 105MB primary 2 105MB 84.sh: no job control in this shell sh-4.1# 0GB 83.9GB primary 3 84.0GB 84.2GB 210MB primary 4 84.2GB 36.0TB 35.9TB primary Load software RAID modules. FATAL: Module linear not found. FATAL: Module raid0 not found. FATAL: Module raid1 not found. FATAL: Module raid5 not found. FATAL: Module raid6 not found. FATAL: Module raid10 not found. FATAL: Module raid456 not found. Load device mapper driver (for LVM). FATAL: Module dm_mod not found. Initializing partition /dev/sda2 for use by LVM. pvcreate -M2 -ff -y /dev/sda2 || shellout /scripts/sl73caeapp30-image.master: line 263: pvcreate: command not found Last command exited with 127 Killing off running processes. write_variables cat: /etc/issue: No such file or directory ___________________________________ The following are the contents of /bin and /sbin sh-4.1# ls /bin allowcred.awk dd getdestiny mknod sed basename df getipmi mount sh bash dmesg grep mv sleep bmcsetup dodiscovery gzip netstat sort cat dosysclone hostname nextdestiny tar chmod doxcat ifup ping touch chown echo kill ps udpcat.awk cp egrep ln remoteimmsetup umount cpio find ls restart uname minixcatd.awk rm vi date getcert mkdir rpm sh-4.1# ls /sbin blkid initqueue lspci modprobe route udevadm blockdev insmod lvm mount.nfs rpc.statd udevd dhclient ip mdadm parted rpcbind vconfig dhclient-script kexec mkdosfs pidof rsyslogd xcatroot ethtool killall5 mke2fs pivot_root setupimmnic findfs klogd mkfs poweroff shutdown hwclock loadmlxeth mkfs.ext4 reboot swapon ifconfig loginit mkreiserfs reiserfstune switch_root ifenslave lsmod mkswap rmmod tune2fs Any idea how I get a Genesis image that has the missing commands? Thanks, Rod. ------------------------------------------------------------------------------ _______________________________________________ xCAT-user mailing list xCAT-user@lists.sourceforge.net<mailto:xCAT-user@lists.sourceforge.net> https://lists.sourceforge.net/lists/listinfo/xcat-user
------------------------------------------------------------------------------
_______________________________________________ xCAT-user mailing list xCAT-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xcat-user
