Installation completed successfully.
Your workaround works well.
Thank you all of you for your help.
Jean-Claude
De : Jean-Claude De Giorgi
<[email protected]<mailto:[email protected]>>
Répondre à : xCAT Users Mailing list
<[email protected]<mailto:[email protected]>>
Date : Thursday, 15 May 2014 17:00
À : xCAT Users Mailing list
<[email protected]<mailto:[email protected]>>
Objet : Re: [xcat-user] xCAT - Node reboot problem
Yes, you're right.
I read somewhere in this user list about your workaround.
This is not a big deal to rsetboot nodes before a new installation, just
frustrating because I can feel it's just about to work … .
Maybe the next xCAT release will improve this part and compatibility with RHEL
6 .5.
I will try your suggestion and post the result, but I'm rather confident about
it.
De : Jarrod B Johnson <[email protected]<mailto:[email protected]>>
Répondre à : xCAT Users Mailing list
<[email protected]<mailto:[email protected]>>
Date : Thursday, 15 May 2014 16:29
À : xCAT Users Mailing list
<[email protected]<mailto:[email protected]>>
Objet : Re: [xcat-user] xCAT - Node reboot problem
So this is sadly one of those weird things in BIOS implementations that we
struggle with. Exiting a PXE and continuing on to boot from hard drive can be
tricky.
One thing to check is if your bootorder is missing hard drive from the sequence.
If the hard drive is after pxe, then this is one of those cases where if we try
to make yours work, others will break.
Personally, I've taken to setting boot order to HD first and doing 'rsetboot
<nodes> net' to do the install. In UEFI, this happens as a matter of course
currently. That side steps all this unpleasantness and has hard drive boots be
faster.
[Inactive hide details for De Giorgi Jean-Claude ---05/15/2014 10:26:09 AM---It
works well, the OS starts normally… . Tks]De Giorgi Jean-Claude ---05/15/2014
10:26:09 AM---It works well, the OS starts normally… . Tks
From: De Giorgi Jean-Claude
<[email protected]<mailto:[email protected]>>
To: xCAT Users Mailing list
<[email protected]<mailto:[email protected]>>
Date: 05/15/2014 10:26 AM
Subject: Re: [xcat-user] xCAT - Node reboot problem
________________________________
It works well, the OS starts normally… .
Tks
De : Jarrod B Johnson <[email protected]<mailto:[email protected]>>
Répondre à : xCAT Users Mailing list
<[email protected]<mailto:[email protected]>>
Date : Thursday, 15 May 2014 16:07
À : xCAT Users Mailing list
<[email protected]<mailto:[email protected]>>
Objet : Re: [xcat-user] xCAT - Node reboot problem
What happens if you rsetboot <node> hd
[Inactive hide details for De Giorgi Jean-Claude ---05/15/2014 09:56:17
AM---OK, I changed useflowcontrol value to "no".]De Giorgi Jean-Claude
---05/15/2014 09:56:17 AM---OK, I changed useflowcontrol value to "no".
From: De Giorgi Jean-Claude
<[email protected]<mailto:[email protected]>>
To: xCAT Users Mailing list
<[email protected]<mailto:[email protected]>>
Date: 05/15/2014 09:56 AM
Subject: Re: [xcat-user] xCAT - Node reboot problem
________________________________
OK,
I changed useflowcontrol value to "no".
I'm not sure to understand, do I have to change the value of
precreatemypostscripts to 0 (zero) as well?
Yes, rcons works and bmc console as well.
So after changing the useflowcontrol (and not precreatemypostscripts), I
launched the command you gave me and I got a kernel panic on the boot (see
attached picture).
Tks,
Jean-Claude
De : Lissa Valletta <[email protected]<mailto:[email protected]>>
Répondre à : xCAT Users Mailing list
<[email protected]<mailto:[email protected]>>
Date : Thursday, 15 May 2014 15:20
À : xCAT Users Mailing list
<[email protected]<mailto:[email protected]>>
Objet : Re: [xcat-user] xCAT - Node reboot problem
One other thing, change the following. This may be causing you problems and
why you needed the precreatemypostscripts set.
You have in the site table, we put it there by default. Change it to "no".
useflowcontrol","yes"
chtab key=useflowcontrol site.value=no
When you change the node definitions rerun nodeset
nodeset boot2 osimage=bellatest_node
rsetboot boot2 net
rpower boot2 boot
Does rcons work for you, might help to watch.
Lissa K. Valletta
8-3/B10
Poughkeepsie, NY 12601
(tie 293) 433-3102
[Inactive hide details for De Giorgi Jean-Claude ---05/15/2014 08:46:09
AM---Dear Lissa, Thank you for your reply.]De Giorgi Jean-Claude ---05/15/2014
08:46:09 AM---Dear Lissa, Thank you for your reply.
From: De Giorgi Jean-Claude
<[email protected]<mailto:[email protected]>>
To: xCAT Users Mailing list
<[email protected]<mailto:[email protected]>>,
Date: 05/15/2014 08:46 AM
Subject: Re: [xcat-user] xCAT - Node reboot problem
________________________________
Dear Lissa,
Thank you for your reply.
Here are the asked details:
Lsdef b002:
Object name: b002
arch=x86_64
bmc=b002bmc
currchain=boot
currstate=boot
groups=all,worker,ipmi
initrd=xcat/osimage/bellatest_node/initrd.img
installnic=em1
ip=172.30.0.2
kcmdline=quiet
repo=http://172.30.0.1:80/install/rhels6.5/x86_64<http://172.30.0.1/install/rhels6.5/x86_64>
ks=http://172.30.0.1:80/install/autoinst/b002<http://172.30.0.1/install/autoinst/b002>
ksdevice=em1
kernel=xcat/osimage/bellatest_node/vmlinuz
mac=00:23:ae:ee:b7:2d
mgt=ipmi
netboot=pxe
nfsserver=172.30.0.1
os=rhels6.5
postbootscripts=otherpkgs,route_node_set.sh,bella_install_QLogic.sh,nfs_node_mount.sh,ganglia_node_config.sh,munge,slurm
postscripts=syslog,remoteshell,syncfiles,bella_config_bios_C6220.sh,bella_config_services.sh
power=ipmi
primarynic=em1
profile=cluster
provmethod=bellatest_node
status=booting
statustime=05-15-2014 14:22:02
tftpserver=172.30.0.1
updatestatus=synced
updatestatustime=05-14-2014 16:27:49
xcatmaster=172.30.0.1
abdump site
#key,value,comments,disable
"blademaxp","64",,
"domain","cluster",,
"fsptimeout","0",,
"installdir","/install",,
"ipmimaxp","64",,
"ipmiretries","3",,
"ipmitimeout","2",,
"consoleondemand","no",,
"master","172.30.0.1",,
"forwarders","128.178.15.8,128.178.15.7",,
"nameservers","172.30.0.1",,
"maxssh","8",,
"ppcmaxp","64",,
"ppcretry","3",,
"ppctimeout","0",,
"powerinterval","0",,
"syspowerinterval","0",,
"sharedtftp","1",,
"SNsyncfiledir","/var/xcat/syncfiles",,
"nodesyncfiledir","/var/xcat/node/syncfiles",,
"tftpdir","/tftpboot",,
"xcatdport","3001",,
"xcatiport","3002",,
"xcatconfdir","/etc/xcat",,
"timezone","Europe/Zurich",,
"useNmapfromMN","no",,
"enableASMI","no",,
"db2installloc","/mntdb2",,
"databaseloc","/var/lib",,
"sshbetweennodes","ALLGROUPS",,
"dnshandler","ddns",,
"vsftp","n",,
"cleanupxcatpost","no",,
"dhcplease","43200",,
"useflowcontrol","yes",,
"dhcpinterfaces","em1",,
"ntpservers","172.30.0.1",,
"precreatemypostscripts","1",,
Thank you.
Jean-Claude
De : Lissa Valletta <[email protected]<mailto:[email protected]>>
Répondre à : xCAT Users Mailing list
<[email protected]<mailto:[email protected]>>
Date : Thursday, 15 May 2014 14:33
À : xCAT Users Mailing list
<[email protected]<mailto:[email protected]>>
Cc : "[email protected]<mailto:[email protected]>"
<[email protected]<mailto:[email protected]>>
Objet : Re: [xcat-user] xCAT - Node reboot problem
I will warn you we did not test or support redhat6.5 until our next release
xCAT 2.8.4. You say you have working nodes with the same OS and xCAT level
though.
Could you give us lsdef boot2 and a tabdump site.
Is this a new installation? Might check the setup with this doc, it is good
for all x-series installations.
https://sourceforge.net/apps/mediawiki/xcat/index.php?title=XCAT_iDataPlex_Cluster_Quick_Start
Lissa K. Valletta
8-3/B10
Poughkeepsie, NY 12601
(tie 293) 433-3102
[Inactive hide details for De Giorgi Jean-Claude ---05/15/2014 08:21:17
AM---Hello all, After a node has been reinstalled, it wo]De Giorgi Jean-Claude
---05/15/2014 08:21:17 AM---Hello all, After a node has been reinstalled, it
won't boot its OS.
From: De Giorgi Jean-Claude
<[email protected]<mailto:[email protected]>>
To: "[email protected]<mailto:[email protected]>"
<[email protected]<mailto:[email protected]>>,
Date: 05/15/2014 08:21 AM
Subject: [xcat-user] xCAT - Node reboot problem
________________________________
Hello all,
After a node has been reinstalled, it won't boot its OS.
The installation works well and once it has to reboot, I can see on the remote
console (BMC) that it's kind of stuck on this message:
Trying to load: pxelinux.cfg/AC1E0002 OK
Booting from local disk…
PXE-M0F: Exiting Intel Boot Agent.
I can see in the nodelist table that the status of this node is "failed" :
tabdump nodelist
#node,groups,status,statustime,appstatus,appstatustime,primarysn,hidden,updatestatus,updatestatustime,comments,disable
"b002","all,worker,ipmi","failed","05-15-2014
09:31:22",,,,,"synced","05-14-2014 16:27:49",,
"b002bmc","bmc",,,,,,,,,,
The /var/log/httpd/error_log on the MN gives me that error:
[Wed May 14 16:33:57 2014] [error] [client 172.30.0.2] File does not exist:
/tftpboot/mypostscripts/mypostscript.b002
[Wed May 14 16:33:57 2014] [error] [client 172.30.0.2] File does not exist:
/install/rhels6.5/x86_64/images/updates.img
The first error has been cleared by adding the following option:
chdef -t site -o clustersite precreatemypostscripts=1
Which gave me a kickstart-like file in /tftpboot/mypostscripts.
(I don't know if that was important but at least I don't have anymore the error
message.)
Regarding the second error, I checked on our other clusters with the same xCAT
version and OS, but this file doesn't exist and this error message neither.
The funny thing is if I force the next reboot on the HD, the node boots the OS
normally (rsetboot b002 hd).
So my only clues are this error message and the state of the node written in
the nodelist table.
I cannot find any log files
To me, the /var/log/messages on the MN seems normal:
May 15 09:34:06 b01 dhcpd: DHCPDISCOVER from 00:23:ae:ee:b7:2d via em1
May 15 09:34:06 b01 dhcpd: DHCPOFFER on 172.30.0.2 to 00:23:ae:ee:b7:2d via em1
May 15 09:34:08 b01 dhcpd: DHCPREQUEST for 172.30.0.2 (172.30.0.1) from
00:23:ae:ee:b7:2d via em1
May 15 09:34:08 b01 dhcpd: DHCPACK on 172.30.0.2 to 00:23:ae:ee:b7:2d via em1
May 15 09:34:08 b01 in.tftpd[113221]: RRQ from 172.30.0.2 filename pxelinux.0
May 15 09:34:08 b01 in.tftpd[113221]: tftp: client does not accept options
May 15 09:34:08 b01 in.tftpd[113222]: RRQ from 172.30.0.2 filename pxelinux.0
May 15 09:34:08 b01 in.tftpd[113223]: RRQ from 172.30.0.2 filename
pxelinux.cfg/44454c4c-3500-104c-805a-c4c04f585831
May 15 09:34:08 b01 in.tftpd[113224]: RRQ from 172.30.0.2 filename
pxelinux.cfg/01-00-23-ae-ee-b7-2d
May 15 09:34:08 b01 in.tftpd[113225]: RRQ from 172.30.0.2 filename
pxelinux.cfg/AC1E0002
cat AC1E0002
#boot
DEFAULT xCAT
LABEL xCAT
LOCALBOOT 0
Here are some details about my configurations:
The node (b002) and the management node are a Dell C6220 .
CPU: Intel(R) Xeon(R) CPU E5-2660 0 @ 2.20GHz
OS: RHEL 6.5
xCAT: Version 2.8.3 (built Tue Nov 12 23:16:15 EST 2013)
This is a Management Node
dbengine=SQLite
xCAT tables:
Noderes:
tabdump noderes
"worker",,"pxe","172.30.0.1",,"172.30.0.1",,,"em1","em1",,,"172.30.0.1",
nodetype
"b002","rhels6.5","x86_64","cluster","bellatest_node",
Any ideas?
Thanks.
Jean-Claude
------------------------------------------------------------------------------
"Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE
Instantly run your Selenium tests across 300+ browser/OS combos.
Get unparalleled scalability from the best Selenium testing platform available
Simple to use. Nothing to install. Get started now for free."
http://p.sf.net/sfu/SauceLabs_______________________________________________
xCAT-user mailing list
[email protected]<mailto:[email protected]>
https://lists.sourceforge.net/lists/listinfo/xcat-user
------------------------------------------------------------------------------
"Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE
Instantly run your Selenium tests across 300+ browser/OS combos.
Get unparalleled scalability from the best Selenium testing platform available
Simple to use. Nothing to install. Get started now for free."
http://p.sf.net/sfu/SauceLabs_______________________________________________
xCAT-user mailing list
[email protected]<mailto:[email protected]>
https://lists.sourceforge.net/lists/listinfo/xcat-user
[attachment "graycol.gif" deleted by Lissa Valletta/Poughkeepsie/IBM]
[attachment "node_b002-kernel_panic_at_boot.jpg" deleted by Jarrod B
Johnson/Raleigh/IBM]
------------------------------------------------------------------------------
"Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE
Instantly run your Selenium tests across 300+ browser/OS combos.
Get unparalleled scalability from the best Selenium testing platform available
Simple to use. Nothing to install. Get started now for free."
http://p.sf.net/sfu/SauceLabs_______________________________________________
xCAT-user mailing list
[email protected]<mailto:[email protected]>
https://lists.sourceforge.net/lists/listinfo/xcat-user
[attachment "graycol.gif" deleted by Jarrod B Johnson/Raleigh/IBM]
------------------------------------------------------------------------------
"Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE
Instantly run your Selenium tests across 300+ browser/OS combos.
Get unparalleled scalability from the best Selenium testing platform available
Simple to use. Nothing to install. Get started now for free."
http://p.sf.net/sfu/SauceLabs_______________________________________________
xCAT-user mailing list
[email protected]<mailto:[email protected]>
https://lists.sourceforge.net/lists/listinfo/xcat-user
[attachment "graycol.gif" deleted by Jarrod B Johnson/Raleigh/IBM]
------------------------------------------------------------------------------
"Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE
Instantly run your Selenium tests across 300+ browser/OS combos.
Get unparalleled scalability from the best Selenium testing platform available
Simple to use. Nothing to install. Get started now for free."
http://p.sf.net/sfu/SauceLabs
_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user
