Jarrod,
I figured out the solution to the uefi issue.
OS has started installing as expected.
I will test enabling the second interface later, and will post an email if
I face any issue.
Thank you,
Lohit
On Jun 17, 2014 6:13 PM, "Lohit Valleru" <[email protected]> wrote:
> Hello Jarrod,
>
> Nodeset m2 stat says : install respective osimage.
>
> I apologize, but I have come to access the server physically at the data
> center and I am replying from my mobile phone.
>
> 1. I have changed the netboot to xnba and removed the extra mac address
> and kept the extra interface disabled.
>
> It seemed to work and went ahead till downloading install.img , but then
> restarted again without any info in the console messages or logs. It never
> went to that stage again.
>
> 2. I added the second mac again to the node definition.
>
> This time, it again tries to discover with the second interface with
> messages as in my previous email and restarts.
>
> 3. I decided to physically access the server. Once onsite, I removed the
> mac again and tried to do nodeset and power on the node.
>
> I observed in the console log( not on the physical console ) , that this
> time the server went past downloading install.img but halts with this
> message.
>
> " the following error occurred with your partitioning
>
> You have not created a /boot/efi partition. "
>
> I remember seeing this issue sometime in the forum, and believe this issue
> is related to xnba.
>
> May I know how do I resolve this issue.
>
> I am not entirely sure, if the interface issue is solved or will creep up
> once I enable booting from that interface.
>
> I will try to research more and work on this.
>
> Thank you for helping me on this.
>
> Regards,
>
> Lohit
> On Jun 17, 2014 3:43 PM, "Jarrod B Johnson" <[email protected]> wrote:
> >
> > nodeset m2 stat
> >
> > What is on m2 hard disk?
> >
> > Lohit Valleru ---06/17/2014 03:24:06 PM---Thank you Jarrod. I have added
> the second mac information to the node.
> >
> >
> > From: Lohit Valleru <[email protected]>
> > To: xCAT Users Mailing list <[email protected]>
> > Date: 06/17/2014 03:24 PM
> > Subject: Re: [xcat-user] Regarding post-discovery issue with dual
> ethernet interfaces
> >
> > ________________________________
> >
> >
> >
> > Thank you Jarrod.
> > I have added the second mac information to the node.
> > Also, before i saw your email - i had disabled network booting from the
> second interface
> >
> > Now, I see the following messages in the logs, and the console does not
> show up anything useful. After some time, the system just reboots.
> >
> > DHCPDISCOVER from 6c:ae:8b:20:d5:33 via eth2: booting disallowed
> > Jun 17 15:17:49 M1 dhcpd: DHCPDISCOVER from 6c:ae:8b:20:d5:33 via eth2:
> booting disallowed
> > Jun 17 15:17:51 M1 dhcpd: DHCPDISCOVER from 6c:ae:8b:20:d5:33 via eth2:
> booting disallowed
> > Jun 17 15:17:55 M1 dhcpd: DHCPDISCOVER from 6c:ae:8b:20:d5:33 via eth2:
> booting disallowed
> > Jun 17 15:18:03 M1 dhcpd: DHCPDISCOVER from 6c:ae:8b:20:d5:33 via eth2:
> booting disallowed
> >
> > I will try changing netboot to xnba, and check if it performs as
> expected.
> >
> > Thank you,
> >
> > Lohit
> >
> >
> > On Tue, Jun 17, 2014 at 2:22 PM, Jarrod B Johnson <[email protected]>
> wrote:
> > Is the second nic intended for bonding or other application? Is there
> an IP address it should have?
> >
> > Discovery should have disabled the second nic or assigned the intended
> address. To manually do so, nodech m2
> mac.mac='6c:ae:8b:20:d5:32|6c:ae:8b:20:d5:33!*NOIP*' then makedhcp.
> >
> > FYI, you could also have left netboot=xnba and the 'right' behavior
> would have been observed (the firmware would never actually attempt the
> second nic).
> >
> > Lohit Valleru ---06/17/2014 01:57:29 PM---Hello All, xCAT server in one
> of our cluster environments is running with version :
> >
> > From: Lohit Valleru <[email protected]>
> > To: xCAT Users Mailing list <[email protected]>
> > Date: 06/17/2014 01:57 PM
> > Subject: [xcat-user] Regarding post-discovery issue with dual ethernet
> interfaces
> > ________________________________
> >
> >
> >
> >
> > Hello All,
> >
> > xCAT server in one of our cluster environments is running with version :
> 2.7.4
> > This is a prebuilt xCAT cluster from IBM, and i really do not want to
> update this test environment as of now.
> >
> > Issue : ( Node constantly goes into discovery genesis kernel and does
> not install OSimage )
> >
> > I have followed the following steps:
> >
> > nodeset m2 osimage=centos6-x86_64-install-bluefin-mgmt
> > rsetboot m2 net
> > rpower m2 boot
> >
> > However, the node does not recognize that it has to install the above
> OSimage. Instead, it goes into the discovery mode, everytime.
> >
> > I had verified the tftpboot files, and also the dhcpd leases values. The
> leases file clearly mentions that m2 node mac address (6c:ae:8b:20:d5:32 )
> should load pxelinux.0 file. I do not find an issue with it.
> >
> > After some analysis, i realized that the node is actually trying to dhcp
> from "both" of the ethernet interfaces that are present on the server with
> mac addresses:
> >
> > 6c:ae:8b:20:d5:32 and 6c:ae:8b:20:d5:33
> >
> > 6c:ae:8b:20:d5:32 has the node discovered with its definition.
> >
> > However 6c:ae:8b:20:d5:33 does not have a node defined with it, which is
> leading to node discovery and the node goes into genesis kernel with ip
> address from the dynamic range.
> >
> > Object name: m2
> > arch=x86_64
> > bmc=172.29.102.2
> > bmcpassword=PASSW0RD
> > bmcport=0
> > bmcusername=USERID
> > chain=runcmd=osimage=centos6-x86_64-install-bluefin-mgmt
> > currchain=boot
> > currstate=install centos6-x86_64-bluefin-mgmt
> > groups=mgmt
> > initrd=xcat/centos6/x86_64/initrd.img
> > installnic=mac
> > kcmdline=quiet repo=http://!myipfn!/install/centos6/x86_64/
> ks=http://!myipfn!/install/autoinst/m2 ksdevice=6c:ae:8b:20:d5:32 cmdline
> console=tty0 console=ttyS0,115200
> > kernel=xcat/centos6/x86_64/vmlinuz
> > mac=6c:ae:8b:20:d5:32
> > mgt=ipmi
> > mtm=7915AC1
> > netboot=pxe
> > ondiscover=nodediscover
> > os=centos6
> > postbootscripts=otherpkgs
> > postscripts=syslog,remoteshell,syncfiles
> > profile=bluefin-mgmt
> > provmethod=centos6-x86_64-install-bluefin-mgmt
> > serial=KQ0C1B6
> > serialport=0
> > serialspeed=115200
> > status=powering-off
> > statustime=06-17-2014 13:34:22
> > supportedarchs=x86,x86_64
> > switch=switch2
> > switchport=12
> >
> > Is there anyway, that we could prevent this from happening.
> > Is it possible to use just one interface for tftp and dhcp look up.
> >
> > It is also possible that, i do not understand the issue correctly.
> Please advice.
> >
> > Thank you,
> >
> >
> Lohit------------------------------------------------------------------------------
> > HPCC Systems Open Source Big Data Platform from LexisNexis Risk Solutions
> > Find What Matters Most in Your Big Data with HPCC Systems
> > Open Source. Fast. Scalable. Simple. Ideal for Dirty Data.
> > Leverages Graph Analysis for Fast Processing & Easy Data Exploration
> >
> http://p.sf.net/sfu/hpccsystems_______________________________________________
> > xCAT-user mailing list
> > [email protected]
> > https://lists.sourceforge.net/lists/listinfo/xcat-user
> >
> >
> >
> ------------------------------------------------------------------------------
> > HPCC Systems Open Source Big Data Platform from LexisNexis Risk Solutions
> > Find What Matters Most in Your Big Data with HPCC Systems
> > Open Source. Fast. Scalable. Simple. Ideal for Dirty Data.
> > Leverages Graph Analysis for Fast Processing & Easy Data Exploration
> > http://p.sf.net/sfu/hpccsystems
> > _______________________________________________
> > xCAT-user mailing list
> > [email protected]
> > https://lists.sourceforge.net/lists/listinfo/xcat-user
> >
> ------------------------------------------------------------------------------
> > HPCC Systems Open Source Big Data Platform from LexisNexis Risk Solutions
> > Find What Matters Most in Your Big Data with HPCC Systems
> > Open Source. Fast. Scalable. Simple. Ideal for Dirty Data.
> > Leverages Graph Analysis for Fast Processing & Easy Data Exploration
> >
> http://p.sf.net/sfu/hpccsystems_______________________________________________
> > xCAT-user mailing list
> > [email protected]
> > https://lists.sourceforge.net/lists/listinfo/xcat-user
> >
> >
> >
> ------------------------------------------------------------------------------
> > HPCC Systems Open Source Big Data Platform from LexisNexis Risk Solutions
> > Find What Matters Most in Your Big Data with HPCC Systems
> > Open Source. Fast. Scalable. Simple. Ideal for Dirty Data.
> > Leverages Graph Analysis for Fast Processing & Easy Data Exploration
> > http://p.sf.net/sfu/hpccsystems
> > _______________________________________________
> > xCAT-user mailing list
> > [email protected]
> > https://lists.sourceforge.net/lists/listinfo/xcat-user
> >
>
------------------------------------------------------------------------------
HPCC Systems Open Source Big Data Platform from LexisNexis Risk Solutions
Find What Matters Most in Your Big Data with HPCC Systems
Open Source. Fast. Scalable. Simple. Ideal for Dirty Data.
Leverages Graph Analysis for Fast Processing & Easy Data Exploration
http://p.sf.net/sfu/hpccsystems
_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user
