Hi,
I've installed scsi drivers from the sysclone image to the genesis boot
kernel and I finally could recognize ssd disks.
Best Regards
2014-10-10 10:40 GMT-03:00 Fabio Moreira <[email protected]>:
> Hi,
>
> I´m facing a problem with SSD disk (ST100FM0012) while instaling a image
> into a node.
>
> I´ve installed a CentOS6.5 into a server in order to be a golden client
> with no problems. I also installed the controller disk´s driver to the
> genesis boot kernel (
> http://sourceforge.net/p/xcat/wiki/XCAT_iDataPlex_Advanced_Setup/#run-asu-via-the-genesis-boot-kernel)
> but the genesis doesn´t find the disks. I´ve put a *fdisk -l* and a *lsblk
> *inside <image>.master to test and I didn´t get any message.
>
> I would like to know if it´s possible to use the same kernel from the
> image, like we can do in xCAT 1 with *youk *option, instead of
> kernel-genesis. Or if anyone have already faced any similar problem that
> can help me with kernel-genesis.
>
> Thanks in advance!
>
> Fabio Souza
>
--
Fábio MS
------------------------------------------------------------------------------
Comprehensive Server Monitoring with Site24x7.
Monitor 10 servers for $9/Month.
Get alerted through email, SMS, voice calls or mobile push notifications.
Take corrective actions from your mobile device.
http://p.sf.net/sfu/Zoho
_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user
