I fixed the typo and try to install wget in centos7.pkglist, but wget package still doesn't get installed:
[root@node0800 ~]# wget -l inf -N -r --waitretry=10 --random-wait --retry-connrefused -e robots=off -nH --cut-dirs=2 --reject "index.html*" --no-parent -t 0 -T 60 http://10.125.40.6/install/postscripts/ -P /xcatpost -bash: wget: command not found So I try the commands: [root@master ~]# xdsh node0800 -K Enter the password for the userid: root on the node where the ssh keys will be updated: /usr/bin/ssh setup is complete. return code = 0 [root@master ~]# updatenode node0800 -P node0800: Cannot download the postscripts from 10.125.40.6 for node0800.palmetto.clemson.edu check /tmp/wget.log on the node. This is the centos7.pkglist file after I fixed it, attached. I would worry I have a repo problem, but yum works from the node. From the ks log file on the node, when xcat try to use wget, but wget isn't installed yet. Lanae Neild Systems Programmer I HPC, CCIT, Clemson University (864)505-4293 [email protected] On Fri, Dec 5, 2014 at 5:17 PM, Lanae Neild <[email protected]> wrote: > Thanks, You're right, I had it backward, here is the real thing and it > seems part of the problem is that wget doesn't get installed...I found a > typo in the centos7.pkglist file which might (hopefully) be responsible for > it, so I'll try a reinstall over the weekend and see what happens: > > [root@node0800 xcat]# wget -l inf -N -r --waitretry=10 --random-wait > --retry-connrefused -e robots=off -nH --cut-dirs=2 --reject "index.html*" > --no-parent -t 0 -T 60 http://10.125.40.6/install/postscripts/ -P > /xcatpost > > -bash: wget: command not found > > Lanae Neild > Systems Programmer I > HPC, CCIT, Clemson University > (864)505-4293 > [email protected] > > > > > On Fri, Dec 5, 2014 at 4:56 PM, Ling Gao <[email protected]> wrote: > >> The command should be run on the node. the IP should be the ip for the >> xcatmaster. In your case: >> 10.125.4.39 is the node ip for node0800 . 10.125.40.6 is the >> xcatmaster of the node according to the node definition. >> >> Please ssh to node0800, then run wget on the node. >> wget -l inf -N -r --waitretry=10 --random-wait --retry-connrefused -e >> robots=off -nH --cut-dirs=2 --reject "index.html*" --no-parent -t 0 -T 60 >> *http://10.125.40.6/install/postscripts/* >> <http://10.125.4.39/install/postscripts/> -P /xcatpost >> >> And also check on xcatmaster ( *10.125.40.6*), make sure there is a >> acctually a directory /install/postscripts with all the postscripts. >> BTW, is the netmask 255.255.0.0 on networks table for 10.125 network or >> you put the wrong ip for xcatmaster for the node? >> >> Ling Gao >> Poughkeepsie Unix Development Lab >> IBM Systems and Technology Group >> Internal: T/L 293-5692 >> External: [email protected], 845-433-5692 >> >> "I never worry about the future. It comes soon enough." --- Albert >> Einstein >> >> >> >> From: Lanae Neild <[email protected]> >> To: xCAT Users Mailing list <[email protected]> >> Date: 12/05/2014 04:32 PM >> Subject: Re: [xcat-user] xcat 2.8.5, centos7, postscripts >> ------------------------------ >> >> >> >> [root@master lanae]# wget -l inf -N -r --waitretry=10 --random-wait >> --retry-connrefused -e robots=off -nH --cut-dirs=2 --reject "index.html*" >> --no-parent -t 0 -T 60 *http://10.125.4.39/install/postscripts/* >> <http://10.125.4.39/install/postscripts/> -P /xcatpost >> >> --2014-12-05 16:26:33-- *http://10.125.4.39/install/postscripts/* >> <http://10.125.4.39/install/postscripts/> >> >> Connecting to 10.125.4.39:80... failed: Connection refused. >> >> Retrying. >> >> >> Lanae Neild >> Systems Programmer I >> HPC, CCIT, Clemson University >> (864)505-4293 >> *[email protected]* <[email protected]> >> >> >> >> >> On Fri, Dec 5, 2014 at 2:57 PM, Ling Gao <*[email protected]* >> <[email protected]>> wrote: >> ok, on management node (or the service node), there is a directory >> /install/autoinst, there is a file with the node name, that is the kick >> start file. Can you view that file and look for 'wget'? You will get >> something like: >> wget -l inf -N -r --waitretry=10 --random-wait --retry-connrefused -e >> robots=off -nH --cut-dirs=2 --reject "index.html*" --no-parent -t 0 -T 60 >> *http://$i$INSTALLDIR/postscripts/* <http://$i$installdir/postscripts/> >> -P /xcatpost >> >> Can you run this command on the node? This is the first step to prepare >> the postscripts to be run on the node. Replace $i with the ip of the >> service node, $INSTALLDIR with "/install". See what error it gives you. >> >> >> Ling Gao >> Poughkeepsie Unix Development Lab >> IBM Systems and Technology Group >> Internal: T/L 293-5692 >> External: *[email protected]* <[email protected]>, *845-433-5692* >> <845-433-5692> >> >> "I never worry about the future. It comes soon enough." --- Albert >> Einstein >> >> >> >> From: Lanae Neild <*[email protected]* <[email protected]>> >> To: xCAT Users Mailing list <*[email protected]* >> <[email protected]>> >> Date: 12/05/2014 02:00 PM >> Subject: Re: [xcat-user] xcat 2.8.5, centos7, postscripts >> ------------------------------ >> >> >> >> Answered inline: >> >> On Fri, Dec 5, 2014 at 11:04 AM, Ling Gao <*[email protected]* >> <[email protected]>> wrote: >> 1. Are you able to ssh to the node with password or without password? If >> you could ssh without password, that means remoteshell postscript worked. >> With password only >> >> 2. Do you see /xcatpost directory with all the postscripts on the node? >> No >> >> 3. What are the content of /xcatpost/mypostscript and >> /xcatpost/mypostscript.post on the node? >> Not there >> >> 4. Any error from /var/log/xcat/xcat.log file? Any error from >> /tmp/wget.log? >> There is no /var/log/xcat/ or /tmp/wget.log >> >> 5. In most cases, incorrect name resolution is the culprit for >> postscript not running. Could you please make sure that the node ip can be >> resolved to the correct node name on both management node and the service >> node? (reverse lookup) >> >> [root@master postscripts]# nslookup node0800 >> Server: 10.125.40.6 >> Address: 10.125.40.6#53 >> >> Name: *node0800.palmetto.clemson.edu* >> <http://node0800.palmetto.clemson.edu/> >> Address: 10.125.4.39 >> >> [root@master postscripts]# nslookup 10.125.4.39 >> Server: 10.125.40.6 >> Address: 10.125.40.6#53 >> >> 39.4.125.10.in-addr.arpa name = *node0800.palmetto.clemson.edu* >> <http://node0800.palmetto.clemson.edu/>. >> >> And the same for all 5 of our service nodes. >> >> >> >> >> >> From: Lanae Neild <*[email protected]* <[email protected]>> >> To: xCAT Users Mailing list <*[email protected]* >> <[email protected]>> >> Date: 12/05/2014 10:24 AM >> Subject: [xcat-user] xcat 2.8.5, centos7, postscripts >> ------------------------------ >> >> >> >> >> I'm trying to get centos7 compute nodes imaged, I have a basic centos7 >> profile/group set up and the OS installs but the postscripts don't seem to >> run, starting with resyslog in postscripts.postscripts field. I'm not sure >> about the default postscripts like syslog,remoteshell, etc. but does't seem >> to do anything, either. The master node and service nodes are on SL6, if >> that matters. Stumped at the moment... >> >> >> Here is the node I'm testing on: >> >> [root@master centos7.0]# lsdef node0800 >> Object name: node0800 >> addkcmdline=driverload=e1000e net.ifnames=0 >> arch=x86_64 >> bmc=node0800-man0 >> cons=ipmi >> currchain=boot >> currstate=install centos7.0-x86_64-centos7 >> getmac=ipmi >> groups=phase04,all,ibm,centos7,DX340 >> initrd=xcat/osimage/centos7.0-x86_64-install-centos7/initrd.img >> interface=eth0 >> kcmdline=quiet repo=*http://10.125.40.6:80/install/centos7.0/x86_64* >> <http://10.125.40.6/install/centos7.0/x86_64> ks= >> *http://10.125.40.6:80/install/autoinst/node0800* >> <http://10.125.40.6/install/autoinst/node0800> ksdevice=eth0 cmdline >> kernel=xcat/osimage/centos7.0-x86_64-install-centos7/vmlinuz >> mac=00:1F:C6:D9:44:86 >> mgt=ipmi >> mtm=6389AC1 >> netboot=pxe >> nfsdir=/install >> nfsserver=10.125.40.6 >> os=centos7.0 >> postbootscripts=otherpkgs,palmetto-ipmi,serialconsole >> >> postscripts=syslog,remoteshell,syncfiles,resyslog,palmetto-mountxcat,palmetto-yumpackages >> >> power=ipmi >> primarynic=eth0 >> profile=centos7 >> provmethod=centos7.0-x86_64-install-centos7 >> rack=BU-31 >> room=ITC >> serial=06C9158 >> serialflow=hard >> serialport=1 >> serialspeed=19200 >> status=booted >> statustime=05-25-2012 16:46:05 >> supportedarchs=x86,x86_64 >> switch=h-itc-bu31-i8000-36 >> switchinterface=1/29 >> switchport=29 >> tftpserver=10.125.40.6 >> unit=30 >> xcatmaster=10.125.40.6 >> >> And its osimage: >> >> [root@master centos7.0]# lsdef -t osimage >> centos7.0-x86_64-install-centos7 >> Object name: centos7.0-x86_64-install-centos7 >> imagetype=linux >> osarch=x86_64 >> osdistroname=centos7.0-x86_64 >> osname=Linux >> osvers=centos7.0 >> otherpkgdir=/install/post/otherpkgs/centos7.0/x86_64 >> pkgdir=/install/centos7.0/x86_64 >> pkglist=/install/custom/install/centos7.0/centos7.pkglist >> profile=centos7 >> provmethod=install >> template=/install/custom/install/centos7.0/centos7.tmpl >> >> >> >> Lanae Neild >> Systems Programmer I >> HPC, CCIT, Clemson University >> *(864)505-4293* <%28864%29505-4293> >> *[email protected]* <[email protected]> >> >> >> >> ------------------------------------------------------------------------------ >> Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server >> from Actuate! Instantly Supercharge Your Business Reports and Dashboards >> with Interactivity, Sharing, Native Excel Exports, App Integration & more >> Get technology previously reserved for billion-dollar corporations, FREE >> >> *http://pubads.g.doubleclick.net/gampad/clk?id=164703151&iu=/4140/ostg.clktrk* >> <http://pubads.g.doubleclick.net/gampad/clk?id=164703151&iu=/4140/ostg.clktrk> >> _______________________________________________ >> xCAT-user mailing list >> *[email protected]* <[email protected]> >> *https://lists.sourceforge.net/lists/listinfo/xcat-user* >> <https://lists.sourceforge.net/lists/listinfo/xcat-user> >> >> >> >> ------------------------------------------------------------------------------ >> Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server >> from Actuate! Instantly Supercharge Your Business Reports and Dashboards >> with Interactivity, Sharing, Native Excel Exports, App Integration & more >> Get technology previously reserved for billion-dollar corporations, FREE >> >> *http://pubads.g.doubleclick.net/gampad/clk?id=164703151&iu=/4140/ostg.clktrk* >> <http://pubads.g.doubleclick.net/gampad/clk?id=164703151&iu=/4140/ostg.clktrk> >> _______________________________________________ >> xCAT-user mailing list >> *[email protected]* <[email protected]> >> *https://lists.sourceforge.net/lists/listinfo/xcat-user* >> <https://lists.sourceforge.net/lists/listinfo/xcat-user> >> >> >> ------------------------------------------------------------------------------ >> Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server >> from Actuate! Instantly Supercharge Your Business Reports and Dashboards >> with Interactivity, Sharing, Native Excel Exports, App Integration & more >> Get technology previously reserved for billion-dollar corporations, FREE >> >> *http://pubads.g.doubleclick.net/gampad/clk?id=164703151&iu=/4140/ostg.clktrk* >> <http://pubads.g.doubleclick.net/gampad/clk?id=164703151&iu=/4140/ostg.clktrk> >> _______________________________________________ >> xCAT-user mailing list >> *[email protected]* <[email protected]> >> *https://lists.sourceforge.net/lists/listinfo/xcat-user* >> <https://lists.sourceforge.net/lists/listinfo/xcat-user> >> >> >> >> ------------------------------------------------------------------------------ >> Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server >> from Actuate! Instantly Supercharge Your Business Reports and Dashboards >> with Interactivity, Sharing, Native Excel Exports, App Integration & more >> Get technology previously reserved for billion-dollar corporations, FREE >> >> *http://pubads.g.doubleclick.net/gampad/clk?id=164703151&iu=/4140/ostg.clktrk* >> <http://pubads.g.doubleclick.net/gampad/clk?id=164703151&iu=/4140/ostg.clktrk> >> _______________________________________________ >> xCAT-user mailing list >> *[email protected]* <[email protected]> >> *https://lists.sourceforge.net/lists/listinfo/xcat-user* >> <https://lists.sourceforge.net/lists/listinfo/xcat-user> >> >> >> ------------------------------------------------------------------------------ >> Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server >> from Actuate! Instantly Supercharge Your Business Reports and Dashboards >> with Interactivity, Sharing, Native Excel Exports, App Integration & more >> Get technology previously reserved for billion-dollar corporations, FREE >> >> http://pubads.g.doubleclick.net/gampad/clk?id=164703151&iu=/4140/ostg.clktrk >> _______________________________________________ >> xCAT-user mailing list >> [email protected] >> https://lists.sourceforge.net/lists/listinfo/xcat-user >> >> >> >> ------------------------------------------------------------------------------ >> Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server >> from Actuate! Instantly Supercharge Your Business Reports and Dashboards >> with Interactivity, Sharing, Native Excel Exports, App Integration & more >> Get technology previously reserved for billion-dollar corporations, FREE >> >> http://pubads.g.doubleclick.net/gampad/clk?id=164703151&iu=/4140/ostg.clktrk >> _______________________________________________ >> xCAT-user mailing list >> [email protected] >> https://lists.sourceforge.net/lists/listinfo/xcat-user >> >> >
centos7.pkglist
Description: Binary data
------------------------------------------------------------------------------ Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server from Actuate! Instantly Supercharge Your Business Reports and Dashboards with Interactivity, Sharing, Native Excel Exports, App Integration & more Get technology previously reserved for billion-dollar corporations, FREE http://pubads.g.doubleclick.net/gampad/clk?id=164703151&iu=/4140/ostg.clktrk
_______________________________________________ xCAT-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/xcat-user
