Thanks. I am not setting the vmnics attribute. On the vmware side, I must
specify a DVS (distributed virtual switch) and the port-group. Do those
attributes translate to the vmnics attribute?

On Mon, Jan 19, 2015 at 11:09 PM, Xiao Peng Wang <[email protected]> wrote:

> Make sure the vmnics attribute for the clone target node has been set with
> the required nics.
>
>
> Thanks
> Best Regards
> ----------------------------------------------------------------------
> Wang Xiaopeng (王晓朋)
> IBM China System Technology Laboratory
> Tel: 86-10-82453455
> Email: [email protected]
> Address: 28,ZhongGuanCun Software Park,No.8 Dong Bei Wang West Road,
> Haidian District Beijing P.R.China 100193
>
> [image: Inactive hide details for Jestin Woods ---2015/01/20 02:31:34---I
> do not want to redeploy the OS. The template that I'm cloning]Jestin
> Woods ---2015/01/20 02:31:34---I do not want to redeploy the OS. The
> template that I'm cloning has complex customizations that I do
>
> From: Jestin Woods <[email protected]>
> To: xCAT Users Mailing list <[email protected]>
> Date: 2015/01/20 02:31
> Subject: Re: [xcat-user] setting mac address following clonevm
>
> ------------------------------
>
>
>
> I do not want to redeploy the OS. The template that I'm cloning has
> complex customizations that I do not want to reimplement via
> kickstart/postscripts. This is why I'm doing the clone. Once the clone is
> done, though, I am having trouble discovering the node in xcat if I don't
> know the IP address or mac address of the new VM. I figured if I could get
> the mac address set, that would be enough to set the IP as xcat controls
> dhcp. Perhaps I am going about this the wrong way? How would one typically
> manage nodes that have been cloned via xcat?
>
> On Sun, Jan 18, 2015 at 7:33 PM, Xiao Peng Wang <*[email protected]*
> <[email protected]>> wrote:
>
>    We thought if you running clone, the cloned system will have OS. That
>    means you don't need to redeploy the OS for this node.
>
>    If you want to use xCAT script deployment for the target node OS
>    install, why not just copy the definition of vm and run 'mkvm' to create a
>    new one?
>
>    Thanks
>    Best Regards
>    ----------------------------------------------------------------------
>    Wang Xiaopeng (王晓朋)
>    IBM China System Technology Laboratory
>    Tel: 86-10-82453455
>    Email: *[email protected]* <[email protected]>
>    Address: 28,ZhongGuanCun Software Park,No.8 Dong Bei Wang West Road,
>    Haidian District Beijing P.R.China 100193
>
>    [image: Inactive hide details for Jestin Woods ---2015/01/17
>    01:35:49---Hi, does anyone have advice on how to have the mac address 
> set]Jestin
>    Woods ---2015/01/17 01:35:49---Hi, does anyone have advice on how to have
>    the mac address set in the node def after performing a cl
>
>    From: Jestin Woods <*[email protected]* <[email protected]>>
>    To: xCAT Users Mailing list <*[email protected]*
>    <[email protected]>>
>    Date: 2015/01/17 01:35
>    Subject: [xcat-user] setting mac address following clonevm
>    ------------------------------
>
>
>
>    Hi, does anyone have advice on how to have the mac address set in the
>    node def after performing a clonevm? My problem is I am running a clonevm,
>    however, once the vm is clone there is no mac set in the node definition so
>    makedhcp fails.
>
>    Jestin
>    
> ------------------------------------------------------------------------------
>    New Year. New Location. New Benefits. New Data Center in Ashburn, VA.
>    GigeNET is offering a free month of service with a new server in
>    Ashburn.
>    Choose from 2 high performing configs, both with 100TB of bandwidth.
>    Higher redundancy.Lower latency.Increased capacity.Completely
>    compliant.
> *http://p.sf.net/sfu/gigenet* <http://p.sf.net/sfu/gigenet>
>    _______________________________________________
>    xCAT-user mailing list
> *[email protected]* <[email protected]>
> *https://lists.sourceforge.net/lists/listinfo/xcat-user*
>    <https://lists.sourceforge.net/lists/listinfo/xcat-user>
>
>
>
>    
> ------------------------------------------------------------------------------
>    New Year. New Location. New Benefits. New Data Center in Ashburn, VA.
>    GigeNET is offering a free month of service with a new server in
>    Ashburn.
>    Choose from 2 high performing configs, both with 100TB of bandwidth.
>    Higher redundancy.Lower latency.Increased capacity.Completely
>    compliant.
> *http://p.sf.net/sfu/gigenet* <http://p.sf.net/sfu/gigenet>
>    _______________________________________________
>    xCAT-user mailing list
> *[email protected]* <[email protected]>
> *https://lists.sourceforge.net/lists/listinfo/xcat-user*
>    <https://lists.sourceforge.net/lists/listinfo/xcat-user>
>
>
> ------------------------------------------------------------------------------
> New Year. New Location. New Benefits. New Data Center in Ashburn, VA.
> GigeNET is offering a free month of service with a new server in Ashburn.
> Choose from 2 high performing configs, both with 100TB of bandwidth.
> Higher redundancy.Lower latency.Increased capacity.Completely compliant.
> http://p.sf.net/sfu/gigenet_______________________________________________
> xCAT-user mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/xcat-user
>
>
>
> ------------------------------------------------------------------------------
> New Year. New Location. New Benefits. New Data Center in Ashburn, VA.
> GigeNET is offering a free month of service with a new server in Ashburn.
> Choose from 2 high performing configs, both with 100TB of bandwidth.
> Higher redundancy.Lower latency.Increased capacity.Completely compliant.
> http://p.sf.net/sfu/gigenet
> _______________________________________________
> xCAT-user mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/xcat-user
>
>
------------------------------------------------------------------------------
New Year. New Location. New Benefits. New Data Center in Ashburn, VA.
GigeNET is offering a free month of service with a new server in Ashburn.
Choose from 2 high performing configs, both with 100TB of bandwidth.
Higher redundancy.Lower latency.Increased capacity.Completely compliant.
http://p.sf.net/sfu/gigenet
_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user

Reply via email to