The centos7 installation happens when I set the osimage and if the node
uuid is mapped to a nodename with nodediscoverdef:
nodediscoverdef -u <uuid> -n n2
nodeset n2 osimage=centos7-x86_64-install-compute
Output from dhcpd.leases
# The format of this file is documented in the dhcpd.leases(5) manual page.
# This lease file was written by isc-dhcp-4.2.5
host n2 {
dynamic;
hardware ethernet 00:1e:67:24:58:78;
supersede server.ddns-hostname = "n2";
supersede host-name = "n2";
if option user-class-identifier = "xNBA" and option
client-architecture
= 00:00 {
supersede server.always-broadcast = 01;
supersede server.filename =
"http://${next-server}/tftpboot/xcat/xnba/nodes/n2";;
} elsif option user-class-identifier = "xNBA" and option
client-architecture = 00:09 {
supersede server.filename =
"http://${next-server}/tftpboot/xcat/xnba/nodes/n2.uefi";;
} elsif option client-architecture = 00:07 {
supersede server.filename = "xcat/xnba.efi";
} elsif option client-architecture = 00:00 {
supersede server.filename = "xcat/xnba.kpxe";
} else {
supersede server.filename = "";
}
}
lease 192.168.1.2 {
starts 4 2015/04/16 11:38:42;
ends 4 2015/04/16 23:38:42;
tstp 4 2015/04/16 23:38:42;
cltt 4 2015/04/16 11:38:42;
binding state free;
hardware ethernet 00:1e:67:24:53:20;
uid "\001\000\036g$S ";
}
lease 192.168.1.3 {
starts 1 2015/04/20 01:59:30;
ends 1 2015/04/20 13:59:30;
cltt 1 2015/04/20 01:59:30;
binding state active;
next binding state free;
rewind binding state free;
hardware ethernet 00:1e:67:24:53:20;
}
lease 192.168.1.6 {
starts 1 2015/04/20 06:58:51;
ends 1 2015/04/20 18:58:51;
cltt 1 2015/04/20 06:58:51;
binding state active;
next binding state free;
rewind binding state free;
hardware ethernet 00:1e:67:24:58:78;
}
server-duid "\000\001\000\001\034\302P\177\000\036g$R\030";
lease 192.168.1.3 {
starts 1 2015/04/20 07:53:17;
ends 1 2015/04/20 19:53:17;
cltt 1 2015/04/20 07:53:17;
binding state active;
next binding state free;
rewind binding state free;
hardware ethernet 00:1e:67:24:53:20;
}
Thanks,
Chris
On 20 April 2015 at 03:38, Xiao Peng Wang <[email protected]> wrote:
> You mentioned 'the installation finished', does that mean the centos7
> installation has been done after discovery. Did the install of centos7 was
> triggered by yourself manually or by change setting in chain table?
>
> For the reboot to genesis, I am curious the setting in the dhcpd.lease
> file for this node (/var/lib/dhcpd/dhcpd.lease), could you show it out.
>
> Thanks
> Best Regards
> ----------------------------------------------------------------------
> Wang Xiaopeng (王晓朋)
> IBM China System Technology Laboratory
> Tel: 86-10-82453455
> Email: [email protected]
> Address: 28,ZhongGuanCun Software Park,No.8 Dong Bei Wang West Road,
> Haidian District Beijing P.R.China 100193
>
> [image: Inactive hide details for Chris Hadjigeorgiou ---2015/04/16
> 19:52:34---I've tried recreating the /etc/hosts file, running maked]Chris
> Hadjigeorgiou ---2015/04/16 19:52:34---I've tried recreating the /etc/hosts
> file, running makedns, makehosts, makedhcp -n, nodediscoverdef
>
> From: Chris Hadjigeorgiou <[email protected]>
> To: xCAT Users Mailing list <[email protected]>
> Date: 2015/04/16 19:52
>
> Subject: Re: [xcat-user] Node provisioning
> ------------------------------
>
>
>
> I've tried recreating the /etc/hosts file, running makedns, makehosts,
> makedhcp -n, nodediscoverdef -u <UUID> n1, the installation finished but
> upon next reboot the system PXE boots and tries to reinstall with the
> genesis files instead of booting centos7.
> I can get it to install centos7 again by repeating the nodediscoverdef
> step but once it finishes the same thing happens.
> I'm not really sure what the issue is at this moment.
>
> Regarding the previous issue the MN never got showed this message:
>
> Received getpostscript from <node>, which couldn't be correlated to a node
>
> Thanks,
>
> Chris
>
> On 16 April 2015 at 11:03, Xiao Peng Wang <*[email protected]*
> <[email protected]>> wrote:
>
> It could be confirmed that 'getpostcript' failed on xCAT MN.
>
> Did you see the message like 'Received getpostscript from <node>,
> which couldn't be correlated to a node' after the message xCAT:
> Allowing getpostscript in the syslog. If yes, take a look of your node
> IP resolution in /etc/hosts and dns. Make sure the Ip of node name can
> resolved to IP.
>
> Thanks
> Best Regards
> ----------------------------------------------------------------------
> Wang Xiaopeng (王晓朋)
> IBM China System Technology Laboratory
> Tel: 86-10-82453455
> Email: *[email protected]* <[email protected]>
> Address: 28,ZhongGuanCun Software Park,No.8 Dong Bei Wang West Road,
> Haidian District Beijing P.R.China 100193
>
> [image: Inactive hide details for Chris Hadjigeorgiou ---2015/04/15
> 17:11:41---Xiao thanks for the help. This is the xCAT output from /]Chris
> Hadjigeorgiou ---2015/04/15 17:11:41---Xiao thanks for the help. This is
> the xCAT output from /var/log/messages after changing the template
>
> From: Chris Hadjigeorgiou <*[email protected]* <[email protected]>>
> To: xCAT Users Mailing list <*[email protected]*
> <[email protected]>>
> Date: 2015/04/15 17:11
>
>
> Subject: Re: [xcat-user] Node provisioning
> ------------------------------
>
>
>
> Xiao thanks for the help.
>
> This is the xCAT output from /var/log/messages after changing the
> template reinstalling the node:
>
> Apr 15 09:29:16 xcat xCAT[3613]: xCAT: Allowing nodeset to n1-n2
> osimage=centos7-x86_64-install-compute for root from localhost
> Apr 15 09:38:28 xcat xCAT[3801]: xCAT: Allowing getpostscript
> Apr 15 09:38:42 xcat xCAT[3803]: xCAT: Allowing getpostscript
> Apr 15 09:38:52 xcat xCAT[3805]: xCAT: Allowing getpostscript
> Apr 15 09:39:02 xcat xCAT[3807]: xCAT: Allowing getpostscript
> Apr 15 09:39:18 xcat xCAT[3817]: xCAT: Allowing getpostscript
> Apr 15 09:39:29 xcat xCAT[3819]: xCAT: Allowing getpostscript
> Apr 15 09:39:40 xcat xCAT[3822]: xCAT: Allowing getpostscript
> Apr 15 09:39:55 xcat xCAT[3824]: xCAT: Allowing getpostscript
> Apr 15 09:40:06 xcat xCAT[3839]: xCAT: Allowing getpostscript
> Apr 15 09:40:23 xcat xCAT[3841]: xCAT: Allowing getpostscript
>
> The node at that point is repeating a 'retrying flag update' message
> when I switch to a different tty.
>
> The hardware is Intel servers but we will be testing Supermicro
> servers as well.
>
> Thanks,
>
> Chris
>
> On 15 April 2015 at 09:00, Daniel Letai <*[email protected]*
> <[email protected]>> wrote:
> What hardware are you using? for some pxe firmwares, in the past it
> was required to change the syslinux pxe conf
> use either
> LOCALBOOT 0
> or
> KERNEL chain.c32
> APPEND hd0
>
>
> On Wed, Apr 15, 2015 at 6:04 AM, Xiao Peng Wang <*[email protected]*
> <[email protected]>> wrote:
> #1 Since we did not add the template files for CentOS7, you
> should manually add the link of rhels7 from
> /opt/xcat/share/xcat/install/rh
> to /opt/xcat/share/xcat/install/centos. Then run nodeset again, the
> correct
> kickstart file will be generated.
>
> #2 Regarding the reinstall issue, you can try to get the
> information from syslog. Search 'xCAT' keyword in the
> /var/log/messages
> during the OS deployment phase and show it me.
>
> Thanks
> Best Regards
>
>
> ----------------------------------------------------------------------
> Wang Xiaopeng (王晓朋)
> IBM China System Technology Laboratory
> Tel: 86-10-82453455
> Email: *[email protected]* <[email protected]>
> Address: 28,ZhongGuanCun Software Park,No.8 Dong Bei Wang West
> Road, Haidian District Beijing P.R.China 100193
>
> [image: Inactive hide details for Chris Hadjigeorgiou
> ---2015/04/13 19:55:45---Hi Wang, I managed to get past the initial
> discovery iss]Chris Hadjigeorgiou ---2015/04/13 19:55:45---Hi
> Wang, I managed to get past the initial discovery issue, I think it's
> because I
>
> From: Chris Hadjigeorgiou <*[email protected]*
> <[email protected]>>
> To: xCAT Users Mailing list <*[email protected]*
> <[email protected]>>
> Date: 2015/04/13 19:55
> Subject: Re: [xcat-user] Node provisioning
>
> ------------------------------
>
>
>
> Hi Wang,
>
> I managed to get past the initial discovery issue, I think it's
> because I hadn't set a root password in the passwd table.
> After that the systems got stuck due to wrong options in the
> kickstart file which is not compatible with anaconda from CentOS 7.
> I then used one of the template kickstarts which didn't have
> anything in the preinstall or postinstall sections and
> commented/modified
> the following options:
> langsupport
> mouse none
> changed zerombr yes to just zerombr.
>
> I also had to add the %end directive to the %pre and %post
> sections and move the %end for the %package section one line above
> %pre
>
> When everything was corrected node n1 installed but then went
> into a reinstallation loop.
> I then copied back the original kickstart which xcat created and
> did the same modifications as above, then it complained about the
> following
> issues:
>
> - compat-libstdc++-33 is not available in the repo
> - The following groups don't exist System Tools, Network Server
> and Legacy Software Development
>
> At which point I chose to ignore the above package/groups and
> continue installation.
> Installation seemed to finish successfully but upon reboot the
> nodes tried to install again.
>
> The output for the commands you requested:
>
> [root@xcat ~]# tabdump discoverydata
>
>
> #uuid,node,method,discoverytime,arch,cpucount,cputype,memory,mtm,serial,nicdriver,nicipv4,nichwaddr,nicpci,nicloc,niconboard,nicfirm,switchname,switchaddr,switchdesc,switchport,otherdata,comments,disable
> "80828CCE-A61C-E211-AFE6-001E67245320",,"undef","04-10-2015
> 12:48:12","x86_64","32","Genuine Intel(R) CPU @
>
> 2.60GHz","32134MB",,"............","eth0!cxgb4,eth1!cxgb4,eth2!igb","eth2!
> *192.168.1.4/16*
> <http://192.168.1.4/16>","eth0!00:07:43:11:5A:90,eth1!00:07:43:11:5A:98,eth2!00:1E:67:24:53:20","eth0!0000:02:00.4,eth1!0000:02:00.4,eth2!0000:06:00.0","eth2!Onboard
> Ethernet 1","eth2!1","eth2!PowerVille","eth0!Agent instance for
> device not
> found ,eth1!Agent instance for device not found ",,"eth0!Agent
> instance for
> device not found ,eth1!Agent instance for device not found
>
> ,eth2!MIGfMA0GCSqGSIb3DQEBAQUAA4GNADCBiQKBgQDwbwQN+Od8RurHCczzo8LcWWN5tKrbe8CbjGTHI719YrJqo20J8Ft8mYLuoN9p9oabKL/zCtKzSuYzqxyiiq8G5wwvdqfCDZ/a5+ojDggE+O47hMR8o+461CL081AaQVoCmXaPc/fOA3bQD00jQmFlsTXeIePeHdlVhB/ITWDSuQIDAQAB","eth0!Agent
> instance for device not found ,eth1!Agent instance for device not
> found
> ","<discoveryotherdata>
> <disksize></disksize>
> <mac>cxgb4|eth0|00:07:43:11:5A:90|</mac>
> <mac>cxgb4|eth1|00:07:43:11:5A:98|</mac>
> <mac>igb|eth2|00:1E:67:24:53:20|*192.168.1.4/16*
> <http://192.168.1.4/16></mac>
> <sha512sig>
> N899GFpdHSwTf5WIKXkU4JVd3peux57kKlL3ZHxhrm7EeKZMawgtVaOomy1RoF4e
> 7rAQega7sEMgFTcdMWWEczaQ8js/HGBc8yUpGZA30jXaeCB4Y12fPQnjwlzYEAzG
> HXNtRv49v1TBxDssojZzm/WU5BEOEyi3SG2KKiPKx+I=
> </sha512sig>
>
>
> <xcatpubkey>MIGfMA0GCSqGSIb3DQEBAQUAA4GNADCBiQKBgQCgE/dsB38ppb1h8xXRCvPJylh5Nw68l2wabfXbQAzQcU0RO3UiMNv6fF15QsxGujG5bLUH/FfD61nfM12e4uqr4+s5Q+dKGgXFyBfHUApSRk/i9YRQHMEktv3dgYjB+XVJI01Q5IkYrqgOTpz62/8RTDfG6uxG3dVPcUsbZduZSwIDAQAB</xcatpubkey>
> </discoveryotherdata>
> ",,
> "8069638D-121B-E211-8919-001E67245878",,"undef","04-10-2015
> 16:57:19","x86_64","24","Genuine Intel(R) CPU @
> 2.00GHz","32134MB",,"............","eth0!igb,eth1!igb","eth0!
> *192.168.1.6/16*
> <http://192.168.1.6/16>","eth0!00:1E:67:24:58:78,eth1!00:1E:67:24:58:79","eth0!0000:06:00.0,eth1!0000:06:00.1","eth0!Onboard
> Ethernet 1,eth1!Onboard Ethernet
> 2","eth0!1,eth1!2","eth0!PowerVille,eth1!PowerVille","eth1!Agent
> instance
> for device not found ",,"eth1!Agent instance for device not found
> ","eth1!Agent instance for device not found ","<discoveryotherdata>
> <disksize></disksize>
> <mac>igb|eth0|00:1E:67:24:58:78|*192.168.1.6/16*
> <http://192.168.1.6/16></mac>
> <mac>igb|eth1|00:1E:67:24:58:79|</mac>
> <sha512sig>
> SeRy+hFsDWxVhfKmnM2lI2eq0QJNBkYXWKnauW+6dyGjp//q1aWsv0cYl7V9H1lr
> qfDvvPypeyFLSp9sXyhEPmKXu94mSm2jGQOiSbF6J2RLGV0Vqj4K2oKhiFcJnL3F
> nlZ5VZ4LXQwRD2mypzdF41slSFGygoXY0bJlR25FgYA=
> </sha512sig>
>
>
> <xcatpubkey>MIGfMA0GCSqGSIb3DQEBAQUAA4GNADCBiQKBgQC9WoGQewdd0WGQBK2IRAag++ZDHWm8WZjZqhDnoID+TDH/lMCx1/jAKP5EciW/yfwm+LLP1bkDMNC98+g7CD9KtWMoBGpYs6PVsX7zJSjUwvCX53bIEfho8SWM+jsMkcl+OEsWOv9zXy5l4DBymo0MkXiTuMeWQl82cW0TFukR+wIDAQAB</xcatpubkey>
> </discoveryotherdata>
> ",,
>
> [root@xcat ~]# lsdef n1-n2
> Object name: n1
> arch=x86_64
> cpucount=32
> cputype=Genuine Intel(R) CPU @ 2.60GHz
> currchain=boot
> currstate=install centos7-x86_64-compute
> groups=compute,all
> initrd=xcat/osimage/centos7-x86_64-install-compute/initrd.img
> kcmdline=quiet repo=http://!myipfn!:80/install/centos7/x86_64
> ks=http://!myipfn!:80/install/autoinst/n1
> ksdevice=00:1e:67:24:53:20
> kernel=xcat/osimage/centos7-x86_64-install-compute/vmlinuz
> mac=00:1e:67:24:53:20
> memory=32134MB
> mgt=ipmi
> netboot=xnba
> os=centos7
> postbootscripts=otherpkgs
> postscripts=syslog,remoteshell,syncfiles
> profile=compute
> provmethod=centos7-x86_64-install-compute
> serial=............
> supportedarchs=x86,x86_64
> Object name: n2
> arch=x86_64
> cpucount=24
> cputype=Genuine Intel(R) CPU @ 2.00GHz
> currchain=boot
> currstate=install centos7-x86_64-compute
> groups=compute,all
> initrd=xcat/osimage/centos7-x86_64-install-compute/initrd.img
> kcmdline=quiet repo=http://!myipfn!:80/install/centos7/x86_64
> ks=http://!myipfn!:80/install/autoinst/n2
> ksdevice=00:1e:67:24:58:78
> kernel=xcat/osimage/centos7-x86_64-install-compute/vmlinuz
> mac=00:1e:67:24:58:78
> memory=32134MB
> mgt=ipmi
> netboot=xnba
> os=centos7
> postbootscripts=otherpkgs
> postscripts=syslog,remoteshell,syncfiles
> profile=compute
> provmethod=centos7-x86_64-install-compute
> serial=............
> status=installing
> statustime=04-13-2015 11:25:45
> supportedarchs=x86,x86_64
>
> Thanks,
>
> Chris
>
>
> On 13 April 2015 at 09:27, Xiao Peng Wang <*[email protected]*
> <[email protected]>> wrote:
> Could you show me the output of commands:
>
> 1. tabdump discoverydata
> 2. lsdef n1
>
> Thanks
> Best Regards
>
>
> ----------------------------------------------------------------------
> Wang Xiaopeng (王晓朋)
> IBM China System Technology Laboratory
> Tel: 86-10-82453455
> Email: *[email protected]* <[email protected]>
> Address: 28,ZhongGuanCun Software Park,No.8 Dong Bei Wang
> West Road, Haidian District Beijing P.R.China 100193
>
> [image: Inactive hide details for Chris Hadjigeorgiou
> ---2015/04/10 19:11:57---Hi all, I'm trying to set up xCAT 2.9 on
> some
> Intel x86_]Chris Hadjigeorgiou ---2015/04/10 19:11:57---Hi
> all, I'm trying to set up xCAT 2.9 on some Intel x86_64 nodes
> with CentOS 7
> and
>
> From: Chris Hadjigeorgiou <*[email protected]*
> <[email protected]>>
> To: *[email protected]*
> <[email protected]>
> Date: 2015/04/10 19:11
> Subject: [xcat-user] Node provisioning
> ------------------------------
>
>
>
>
> Hi all,
>
> I'm trying to set up xCAT 2.9 on some Intel x86_64 nodes with
> CentOS 7 and I've come across a few obstacles.
> Firstly, I've been following the idataplex quick start guide
> to set up xCAT.
> I've reached the step of adding a dynamic range to the
> cluster network:
>
> [root@xcat templates]# lsdef -t network -o
> 192_168_0_0-255_255_0_0
> Object name: 192_168_0_0-255_255_0_0
> dhcpserver=192.168.1.1
> dynamicrange=192.168.1.2-192.168.1.128
> gateway=<xcatmaster>
> mask=255.255.0.0
> mgtifname=eth0
> net=192.168.0.0
> tftpserver=192.168.1.1
>
> Next the guide goes into using the idataplex templates which
> some are not available in the e1350 folder,ie compute. Thus I
> tried to
> manually add the node attributes as shown in the advanced guide,
> which
> won't work when defining specific node attributes since it
> requires the
> nodes MAC addresses.
>
> I did create a compute group with the following:
> Object name: compute
>
>
> members=n1,n10,n11,n12,n13,n14,n15,n16,n17,n18,n19,n2,n20,n3,n4,n5,n6,n7,n8,n9
> provmethod=centos7-x86_64-install-compute
>
> In the end when I tried to do the node discovery I ended up
> with the following undefined node:
>
> [root@xcat ~]# nodediscoverls
> UUID NODE
> METHOD MTM SERIAL
> 80828CCE-A61C-E211-AFE6-001E67245320 undef
> undef ........
>
> And when I try to define it I get:
>
> [root@xcat ~]# nodediscoverdef -u
> 80828CCE-A61C-E211-AFE6-001E67245320 -n n1
> Error: The node [n1] should have a correct IP address which
> belongs to the management network.
>
> Then the node is stuck with the 'commencing transmit of
> packages' message.
> If anyone can provide some help it would be greatly
> appreciated.
>
> Kind regards,
>
> Chris
>
> ------------------------------------------------------------------------------
> BPM Camp - Free Virtual Workshop May 6th at 10am PDT/1PM EDT
> Develop your own process in accordance with the BPMN 2
> standard
> Learn Process modeling best practices with Bonita BPM through
> live exercises
> *http://www.bonitasoft.com/be-part-of-it/events/bpm-camp-virtual-*
> <http://www.bonitasoft.com/be-part-of-it/events/bpm-camp-virtual->
> event?utm_
>
>
> source=Sourceforge_BPM_Camp_5_6_15&utm_medium=email&utm_campaign=VA_SF_______________________________________________
> xCAT-user mailing list
> *[email protected]* <[email protected]>
> *https://lists.sourceforge.net/lists/listinfo/xcat-user*
> <https://lists.sourceforge.net/lists/listinfo/xcat-user>
>
>
>
>
> ------------------------------------------------------------------------------
> BPM Camp - Free Virtual Workshop May 6th at 10am PDT/1PM EDT
> Develop your own process in accordance with the BPMN 2
> standard
> Learn Process modeling best practices with Bonita BPM through
> live exercises
> *http://www.bonitasoft.com/be-part-of-it/events/bpm-camp-virtual-*
> <http://www.bonitasoft.com/be-part-of-it/events/bpm-camp-virtual->
> event?utm_
>
>
> source=Sourceforge_BPM_Camp_5_6_15&utm_medium=email&utm_campaign=VA_SF
> _______________________________________________
> xCAT-user mailing list
> *[email protected]* <[email protected]>
> *https://lists.sourceforge.net/lists/listinfo/xcat-user*
> <https://lists.sourceforge.net/lists/listinfo/xcat-user>
>
>
> ------------------------------------------------------------------------------
> BPM Camp - Free Virtual Workshop May 6th at 10am PDT/1PM EDT
> Develop your own process in accordance with the BPMN 2 standard
> Learn Process modeling best practices with Bonita BPM through
> live exercises
> *http://www.bonitasoft.com/be-part-of-it/events/bpm-camp-virtual-*
> <http://www.bonitasoft.com/be-part-of-it/events/bpm-camp-virtual->
> event?utm_
>
>
> source=Sourceforge_BPM_Camp_5_6_15&utm_medium=email&utm_campaign=VA_SF_______________________________________________
> xCAT-user mailing list
> *[email protected]* <[email protected]>
> *https://lists.sourceforge.net/lists/listinfo/xcat-user*
> <https://lists.sourceforge.net/lists/listinfo/xcat-user>
>
>
>
>
> ------------------------------------------------------------------------------
> BPM Camp - Free Virtual Workshop May 6th at 10am PDT/1PM EDT
> Develop your own process in accordance with the BPMN 2 standard
> Learn Process modeling best practices with Bonita BPM through
> live exercises
> *http://www.bonitasoft.com/be-part-of-it/events/bpm-camp-virtual-*
> <http://www.bonitasoft.com/be-part-of-it/events/bpm-camp-virtual->
> event?utm_
>
>
> source=Sourceforge_BPM_Camp_5_6_15&utm_medium=email&utm_campaign=VA_SF
> _______________________________________________
> xCAT-user mailing list
> *[email protected]* <[email protected]>
> *https://lists.sourceforge.net/lists/listinfo/xcat-user*
> <https://lists.sourceforge.net/lists/listinfo/xcat-user>
>
>
>
>
>
>
> ------------------------------------------------------------------------------
> BPM Camp - Free Virtual Workshop May 6th at 10am PDT/1PM EDT
> Develop your own process in accordance with the BPMN 2 standard
> Learn Process modeling best practices with Bonita BPM through live
> exercises
> *http://www.bonitasoft.com/be-part-of-it/events/bpm-camp-virtual-*
> <http://www.bonitasoft.com/be-part-of-it/events/bpm-camp-virtual->
> event?utm_
>
> source=Sourceforge_BPM_Camp_5_6_15&utm_medium=email&utm_campaign=VA_SF
> _______________________________________________
> xCAT-user mailing list
> *[email protected]* <[email protected]>
> *https://lists.sourceforge.net/lists/listinfo/xcat-user*
> <https://lists.sourceforge.net/lists/listinfo/xcat-user>
>
>
> ------------------------------------------------------------------------------
> BPM Camp - Free Virtual Workshop May 6th at 10am PDT/1PM EDT
> Develop your own process in accordance with the BPMN 2 standard
> Learn Process modeling best practices with Bonita BPM through live
> exercises
> *http://www.bonitasoft.com/be-part-of-it/events/bpm-camp-virtual-*
> <http://www.bonitasoft.com/be-part-of-it/events/bpm-camp-virtual->
> event?utm_
>
>
> source=Sourceforge_BPM_Camp_5_6_15&utm_medium=email&utm_campaign=VA_SF_______________________________________________
> xCAT-user mailing list
> *[email protected]* <[email protected]>
> *https://lists.sourceforge.net/lists/listinfo/xcat-user*
> <https://lists.sourceforge.net/lists/listinfo/xcat-user>
>
>
>
>
> ------------------------------------------------------------------------------
> BPM Camp - Free Virtual Workshop May 6th at 10am PDT/1PM EDT
> Develop your own process in accordance with the BPMN 2 standard
> Learn Process modeling best practices with Bonita BPM through live
> exercises
> *http://www.bonitasoft.com/be-part-of-it/events/bpm-camp-virtual-*
> <http://www.bonitasoft.com/be-part-of-it/events/bpm-camp-virtual->
> event?utm_
> source=Sourceforge_BPM_Camp_5_6_15&utm_medium=email&utm_campaign=VA_SF
> _______________________________________________
> xCAT-user mailing list
> *[email protected]* <[email protected]>
> *https://lists.sourceforge.net/lists/listinfo/xcat-user*
> <https://lists.sourceforge.net/lists/listinfo/xcat-user>
>
>
>
> ------------------------------------------------------------------------------
> BPM Camp - Free Virtual Workshop May 6th at 10am PDT/1PM EDT
> Develop your own process in accordance with the BPMN 2 standard
> Learn Process modeling best practices with Bonita BPM through live
> exercises
> http://www.bonitasoft.com/be-part-of-it/events/bpm-camp-virtual-
> event?utm_
>
> source=Sourceforge_BPM_Camp_5_6_15&utm_medium=email&utm_campaign=VA_SF_______________________________________________
> xCAT-user mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/xcat-user
>
>
>
> ------------------------------------------------------------------------------
> BPM Camp - Free Virtual Workshop May 6th at 10am PDT/1PM EDT
> Develop your own process in accordance with the BPMN 2 standard
> Learn Process modeling best practices with Bonita BPM through live
> exercises
> http://www.bonitasoft.com/be-part-of-it/events/bpm-camp-virtual-
> event?utm_
> source=Sourceforge_BPM_Camp_5_6_15&utm_medium=email&utm_campaign=VA_SF
> _______________________________________________
> xCAT-user mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/xcat-user
>
>
------------------------------------------------------------------------------
BPM Camp - Free Virtual Workshop May 6th at 10am PDT/1PM EDT
Develop your own process in accordance with the BPMN 2 standard
Learn Process modeling best practices with Bonita BPM through live exercises
http://www.bonitasoft.com/be-part-of-it/events/bpm-camp-virtual- event?utm_
source=Sourceforge_BPM_Camp_5_6_15&utm_medium=email&utm_campaign=VA_SF
_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user
