Hi David, Thanks for the reply! I did review the documentation but I guess misunderstood it, as I thought enabling SSH in the GUI for the management module would replace the need for the respconfig sshcfg line.
When attempting to do the 2 commands you gave me I get the following errors: [root@xcat ~]# rspconfig bcn-sclmp01-mc1 sshcfg=enable snmpcfg=enable bcn-sclmp01-mc1: Incorrect Password at /opt/xcat/lib/perl/xCAT/SSHInteract.pm line 74. [root@xcat ~]# psh -l XCAT bcn-sclmp01-mc1 info -T mm[1] bcn-sclmp01-mc1: Permission denied (publickey,keyboard-interactive). It is strange that it is giving me incorrect password on the first line, as like I mentioned before I can manually ssh into the host with the username and password I have configured. Any ideas on how to get the first one resolved? I feel there's a good chance in having the rest of my issues be fixed if I can get the rspconfig command working. On 5/6/2015 7:58 AM, David Rajendra wrote: > Hi Russell, > > It has been a while since I did any IBM blades. > > This is a bit old but this documentation might help for setting up the > Bladecenter communication part if you have not seen it: > http://sourceforge.net/p/xcat/wiki/XCAT_BladeCenter_Linux_Cluster/ > (Go down to the section "Configure xCAT" and check the relevant steps from > there). > > Some checks from the documentation: > - Were you able to complete the "rspconfig bcn-sclmp01-mc1 sshcfg=enable > snmpcfg=enable" step from your xCAT server so it can get to the AMM? > This gets password-less ssh working between xCAT and the Bladecenter > Management Module. > > - Does the password-less ssh test "psh -l USERID bcn-sclmp01-mc1 info -T > mm[1]" work? (where USERID is your defined account). > > I also noticed looking at your lsdef output I think you might need the "id" > field populated in the mp table with the blade slot number. > I am not sure if you will be able to rpower the blade without that being set. > > Regards, > > David > > > > > > -----Original Message----- > From: Russell Jones [mailto:[email protected]] > Sent: Monday, May 04, 2015 10:37 PM > To: xCAT Users Mailing list > Subject: [xcat-user] Issues with BladeCenter H and management module commands > > Hi all, > > I am attempting to setup some blades in a BladeCenter in order to be able to > use commands such as rbootseq and rpower. However when I issue these commands > I am getting the following errors. SSH and SNMP are enabled on the chassis, > and I am able to login via SSH successfully using the credentials I have > configured in the mpa table. The user is configured as a Supervisor. Any > assistance in figuring out how to get the management module talking correctly > is appreciated! > > > [root@xcat ~]# rpower node3-4-0 stat > node3-4-0: Error: stat unsupported on the management module > > [root@xcat ~]# rbootseq node3-4-0 net > node3-4-0: Error: Unsupported security level > > > > [root@xcat ~]# lsxcatd -v > Version 2.8.2 (svn r17010, built Mon Jul 22 23:28:24 EDT 2013) > > [root@xcat ~]# lsdef node3-4-0 > Object name: node3-4-0 > arch=x86_64 > currstate=netboot centos6.3-x86_64-v6.3.1-dl-compute > groups=bcn,v6.3.1-dl-compute,all,compute > initrd=xcat/osimage/v6.3.1-dl-compute/initrd-stateless.gz > installnic=mac > ip=X > kcmdline=imgurl=http://!myipfn!:80//install/netboot/centos6.3/x86_64/v6.3.1-dl-compute/rootimg.gz > XCAT=!myipfn!:3001 NODE=node3-4-0 > kernel=xcat/osimage/v6.3.1-dl-compute/kernel > mac=e4:1f:13:79:7e:9c > mgt=blade > mpa=bcn-sclmp01-mc1 > netboot=xnba > nfsserver=X > nicips.eth1=X > nicnetworks.eth1=storage > nictypes.eth1=Ethernet > os=centos6.3 > postscripts=setupntp,hardeths,syslog,remoteshell,syncfiles > primarynic=mac > profile=v6.3.1-dl-compute > provmethod=v6.3.1-dl-compute > status=netbooting > statustime=05-04-2015 14:24:12 > > > [root@xcat ~]# lsdef bcn-sclmp01-mc1 > Object name: bcn-sclmp01-mc1 > groups=mm,bcn,all > ip=X > mgt=blade > mpa=bcn-sclmp01-mc1 > postscripts=setupntp,hardeths,syslog,remoteshell,syncfiles > > > ------------------------------------------------------------------------------ > One dashboard for servers and applications across Physical-Virtual-Cloud > Widest out-of-the-box monitoring support with 50+ applications > Performance metrics, stats and reports that give you Actionable Insights > Deep dive visibility with transaction tracing using APM Insight. > http://ad.doubleclick.net/ddm/clk/290420510;117567292;y > _______________________________________________ > xCAT-user mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/xcat-user > > ------------------------------------------------------------------------------ > One dashboard for servers and applications across Physical-Virtual-Cloud > Widest out-of-the-box monitoring support with 50+ applications > Performance metrics, stats and reports that give you Actionable Insights > Deep dive visibility with transaction tracing using APM Insight. > http://ad.doubleclick.net/ddm/clk/290420510;117567292;y > _______________________________________________ > xCAT-user mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/xcat-user > ------------------------------------------------------------------------------ One dashboard for servers and applications across Physical-Virtual-Cloud Widest out-of-the-box monitoring support with 50+ applications Performance metrics, stats and reports that give you Actionable Insights Deep dive visibility with transaction tracing using APM Insight. http://ad.doubleclick.net/ddm/clk/290420510;117567292;y _______________________________________________ xCAT-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/xcat-user
