for name resolution it uses files (/etc/hosts). Everything is set fine
since it was running perfectly before. There can be a change on any
config file. I suspect the http files.
There is no much infor shown on the syslog apart from the following
May 13 16:52:38 chpcsp02 xCAT: xCAT: Allowing rsetboot to cnode-8-62 net
for root from localhost
May 13 16:52:46 chpcsp02 xCAT: xCAT: Allowing rpower to cnode-8-62 boot
for root from localhost
May 13 16:53:17 chpcsp02 xCAT: xCAT: Allowing nodels to cnode-8-62
nodehm.conserver for root from localhost
May 13 16:56:50 chpcsp02 atftpd[5667]: Serving pxelinux.0 to
172.17.202.206:2070
May 13 16:56:50 chpcsp02 atftpd[5667]: Serving pxelinux.0 to
172.17.202.206:2071
May 13 16:56:50 chpcsp02 atftpd[5667]: Serving
pxelinux.cfg/01-00-26-6c-fe-72-54 to 172.17.202.206:57089
May 13 16:56:50 chpcsp02 atftpd[5667]: Serving pxelinux.cfg/AC11CACE to
172.17.202.206:57090
May 13 16:56:50 chpcsp02 atftpd[5667]: Serving
xcat/centos-5.8/x86_64/vmlinuz to 172.17.202.206:57091
May 13 16:56:52 chpcsp02 atftpd[5667]: Serving
xcat/centos-5.8/x86_64/initrd.img to 172.17.202.206:57092
May 13 17:23:14 chpcsp02 xCAT: xCAT: Allowing nodels to cnode-8-62
nodehm.conserver for root from localhost
but the httpd/access.log shows the following
[root@server]# tail /var/log/httpd/error_log
[Wed May 13 13:14:44 2015] [error] [client 172.17.202.206] File does not
exist: /install/centos5/x86_64/images/updates.img
[Wed May 13 13:14:44 2015] [error] [client 172.17.202.206] File does not
exist: /install/centos5/x86_64/disc1
[Wed May 13 13:14:44 2015] [error] [client 172.17.202.206] File does not
exist: /install/centos5/x86_64/images/product.img
[Wed May 13 13:14:44 2015] [error] [client 172.17.202.206] File does not
exist: /install/centos5/x86_64/disc1
[Wed May 13 13:16:43 2015] [error] [client 172.17.202.206] File does not
exist: /install/centos5/x86_64/disc1
[Wed May 13 16:57:46 2015] [error] [client 172.17.202.206] File does not
exist: /install/centos-5.8/x86_64/images/updates.img
[Wed May 13 16:57:46 2015] [error] [client 172.17.202.206] File does not
exist: /install/centos-5.8/x86_64/disc1
[Wed May 13 16:57:46 2015] [error] [client 172.17.202.206] File does not
exist: /install/centos-5.8/x86_64/images/product.img
[Wed May 13 16:57:46 2015] [error] [client 172.17.202.206] File does not
exist: /install/centos-5.8/x86_64/disc1
[Wed May 13 16:59:45 2015] [error] [client 172.17.202.206] File does not
exist: /install/centos-5.8/x86_64/disc1
Hi Lanton,
Do you see any messages in syslog?
This usually is name resolution problem where the either the node
cannot resolve the xCAT mn name or the xCAT mn cannot resolve the node
name. Please check it.
Another probability is that the master for node was given wrong.
What is the value of "master" on the site table (tabdump site |grep
master" ) or the xcatmaster for the node (lsdef node)? This ip should
be the one that facing the node. The master of the node is xcatmaster
that defined for the node or site.master if xcatmaster is not defined.
Thanks,
Ling
Ling Gao
Poughkeepsie Unix Development Lab
IBM Systems and Technology Group
Internal: T/L 293-5692
External: [email protected], 845-433-5692
"I never worry about the future. It comes soon enough." --- Albert
Einstein
From: Langton <[email protected]>
To: xCAT Users Mailing list <[email protected]>
Date: 05/13/2015 06:31 AM
Subject: [xcat-user] failing to reboot after installation
------------------------------------------------------------------------
I am facing a challenge in a statefull deployment environment. After
installation the node fail to reboot and freezez on the following point
Installing xorg-x11-drv-vmmouse-12.4.0-2.1... Done [714/722]
Installing xorg-x11-drv-acecad-1.1.0-2.1... Done [715/722]
Installing xorg-x11-drv-siliconmotion-1.4.1-2.1... Done [716/722]
Installing linuxwacom-0.7.8.3-11.el5... Done [717/722]
Installing synaptics-0.14.4-8.fc6... Done [718/722]
Installing system-config-display-1.0.48-4.el5... Done [719/722]
Installing xorg-x11-drivers-7.1-4.2.el5... Done [720/722]
Installing firstboot-1.4.27.9-1.el5.centos... Done [721/722]
Installing system-config-keyboard-1.2.11-1.el5... Done [722/722]
Installing ntp-4.2.2p1-15.el5.centos.1... Done [723/722]
Performing post install configuration...
Installing bootloader...
Running post-install scripts
Note this happens even without any postscripts added to the node.
What can cause that
Regards
langton
------------------------------------------------------------------------------
One dashboard for servers and applications across Physical-Virtual-Cloud
Widest out-of-the-box monitoring support with 50+ applications
Performance metrics, stats and reports that give you Actionable Insights
Deep dive visibility with transaction tracing using APM Insight.
http://ad.doubleclick.net/ddm/clk/290420510;117567292;y
_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user
------------------------------------------------------------------------------
One dashboard for servers and applications across Physical-Virtual-Cloud
Widest out-of-the-box monitoring support with 50+ applications
Performance metrics, stats and reports that give you Actionable Insights
Deep dive visibility with transaction tracing using APM Insight.
http://ad.doubleclick.net/ddm/clk/290420510;117567292;y
_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user
------------------------------------------------------------------------------
One dashboard for servers and applications across Physical-Virtual-Cloud
Widest out-of-the-box monitoring support with 50+ applications
Performance metrics, stats and reports that give you Actionable Insights
Deep dive visibility with transaction tracing using APM Insight.
http://ad.doubleclick.net/ddm/clk/290420510;117567292;y
_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user
