Hi Indi, You can give us contents of otherpkgdir and otherpkglist which are from osimage definition;
Or you can refer to this doc to check your steps : http://sourceforge.net/p/xcat/wiki/Setting_up_ESSL_and_PESSL_in_a_Stateful_Cluster/ Or: http://sourceforge.net/p/xcat/wiki/IBM_HPC_Stack_in_an_xCAT_Cluster/ Best Regards -------------------------------------------------- Yuan Bai (白媛) CSTL HPC System Management Development Tel:86-10-82451401 E-mail: [email protected] Address: IBM ZGC Campus. Ring Building 28, ZhongGuanCun Software Park,No.8 Dong Bei Wang West Road, Haidian District, Beijing P.R.China 100193 IBM环宇大厦 北京市海淀区东北旺西路8号，中关村软件园28号楼 邮编:100193 |------------> | From: | |------------> >--------------------------------------------------------------------------------------------------------------------------------------------------| |Xiao Peng Wang/China/IBM@IBMCN | >--------------------------------------------------------------------------------------------------------------------------------------------------| |------------> | To: | |------------> >--------------------------------------------------------------------------------------------------------------------------------------------------| |xCAT Users Mailing list <[email protected]> | >--------------------------------------------------------------------------------------------------------------------------------------------------| |------------> | Date: | |------------> >--------------------------------------------------------------------------------------------------------------------------------------------------| |07/31/2015 10:27 AM | >--------------------------------------------------------------------------------------------------------------------------------------------------| |------------> | Subject: | |------------> >--------------------------------------------------------------------------------------------------------------------------------------------------| |Re: [xcat-user] otherpkgs | >--------------------------------------------------------------------------------------------------------------------------------------------------| Looks like you did not set correct path for repository. The repo path for otherpkgs should be set in the otherpkgdir attribute for the osimage. If you did set the otherpkgdir, check the package date for the repository has been created successfully. Thanks Best Regards ---------------------------------------------------------------------- Wang Xiaopeng (王晓朋) IBM China System Technology Laboratory Tel: 86-10-82453455 Email: [email protected] Address: 28,ZhongGuanCun Software Park,No.8 Dong Bei Wang West Road, Haidian District Beijing P.R.China 100193 Inactive hide details for indi ---2015/07/31 04:35:19---Hi ALL, xcat 2.8.3 indi ---2015/07/31 04:35:19---Hi ALL, xcat 2.8.3 From: indi <[email protected]> To: "[email protected]" <[email protected]> Date: 2015/07/31 04:35 Subject: [xcat-user] otherpkgs Hi ALL, xcat 2.8.3 problem installing optional packages using <profile>.otherpkgs.pkgs file. repository was created with createrepo, but looks like xcat don't see it. during node installation or update(updatenode) getting following messages: IBM_PPE_RTE_LICENSE_ACCEPT=yes IBM_ESSL_LICENSE_ACCEPT=yes IBM_LOADL_LICENSE_ACCEPT=yes yum -y upgrade hpcdev: Loaded plugins: product-id, security, subscription-manager hpcdev: This system is not registered to Red Hat Subscription Management. You can use subscription-manager to register. hpcdev: Setting up Upgrade Process hpcdev: No Packages marked for Update hpcdev: Warning: the packages xlmass** xlsmp** xlf** vac** xlc** libxl** src* ppe_rte_license** pperteman** pperterh6p** ppertesamples** essl** LoadL-full-license** LoadL-resmgr-full** could not be found in the repository, falling back to rpm command, did you forget to run createrepo? hpcdev: IBM_PPE_RTE_LICENSE_ACCEPT=yes IBM_ESSL_LICENSE_ACCEPT=yes IBM_LOADL_LICENSE_ACCEPT=yes rpm -Uvh --replacepkgs xlmass** xlsmp** xlf** vac** xlc** libxl** src* ppe_rte_license** pperteman** pperterh6p** ppertesamples** essl** LoadL-full-license** LoadL-resmgr-full** hpcdev: error: File not found by glob: xlmass** hpcdev: error: File not found by glob: pperterh6p** hpcdev: Postscript: otherpkgs exited with code 2 hpcdev: Running of postscripts has completed. on node hpcdev i can install all of those packets using yum without any problems Regards, Igor ------------------------------------------------------------------------------ _______________________________________________ xCAT-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/xcat-user ------------------------------------------------------------------------------ _______________________________________________ xCAT-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/xcat-user
------------------------------------------------------------------------------
_______________________________________________ xCAT-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/xcat-user
