Hi ALL,
does somebody has experience to integrate ServeRAID C100 driver ot the RHEL
stateful image?
Tried that method:
https://sourceforge.net/p/xcat/wiki/Using_Linux_Driver_Update_Disk/
nodeset injects kernel modules into initrd.
added boot options using addkcmdline
standard installation from RHEL iso and Flash disk with driver(img) looks
like that:
1. Create MEGASR driver diskette or USB Key and attach the device to the
server.
2. Boot to RHEL 6 installation media to begin install.
3. At the "Welcome to RHEL 6" screen, highlight "Install or upgrade an
existing system" then press "Tab" to edit the boot options,
4. Add the following boot parameters to the to the end of the existing
line using either of the following two sets parameters:
linux dd noprobe=ata1 noprobe=ata2 noprobe=ata3 noprobe=ata4
5. When prompted, choose "Yes" to having a driver disk.
6. Select the device (diskette or USB key) for the MEGASR driver location.
7. Install any additional drivers or cancel to continue.
8. On the next screen, either verify the media or skip the media test as
prompted.
9. The graphic portion of the installation will begin. Continue the
installation following the screens through to completion.
thank you for reply,
Igor
------------------------------------------------------------------------------
_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user
