Yes, with mp table pointing to the fpc, reseat will request a power disconnect and then reconnect. It is also possible to add a force imm reset without disconnecting power via fpc, and I need to add that
On Aug 28, 2015 7:57 PM, Chris Samuel <[email protected]> wrote: Hi folks, It appears that the rpower command has an undocumented "reseat" command, and I'm wondering if it's possible to use that with the Nextscale FPC's to logically reseat nx360 M5 blades? It appears to need the mp table populated, and the man page for that refers to it needing the mpa table populated, but they seem to refer to just BladeCenter hardware. All the best, Chris -- Christopher Samuel Senior Systems Administrator VLSCI - Victorian Life Sciences Computation Initiative Email: [email protected] Phone: +61 (0)3 903 55545 http://www.vlsci.org.au/ http://twitter.com/vlsci ------------------------------------------------------------------------------ _______________________________________________ xCAT-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/xcat-user
------------------------------------------------------------------------------
_______________________________________________ xCAT-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/xcat-user
