And did you ever figure out your problem Nathan?
-Josh
On Mon, Nov 23, 2015 at 2:34 PM, Josh Nielsen <[email protected]>
wrote:
> I was going to post a new thread about Centos 7 but thought I might piggy
> back on this one since it is a similar topic. I have xCAT 2.8.3 currently
> and it sounds like from the thread here that upgrading to 2.10 is part of
> the solution for deploying Centos 7.1. Currently the issue I'm having is
> that during a PXE boot it fetches the correct centos 7.1 image and begins
> trying to deploy but after it shows "Mounted Configuration File System" and
> "Started Show Plymouth Boot Screen" I get a message like this:
> "dracut-initqueue: Warning: Could not boot" and hangs there.
>
> This isn't a very explicit error, as to what caused it, and I didn't learn
> much from removing "quiet" from the PXE kernel boot parameters. I also
> can't get the ctrl+alt+F keys to work, at least in a VM, for showing
> different terminals like you could in Centos 6 (which was very helpful for
> debugging).
>
> Is this most likely because the kickstart file itself is not formatted
> correctly (I'm reusing my Centos 6.4 kickstart - until I figure out how
> Centos 7.1 differs), or perhaps that the kickstart is not being properly
> fetched from the gpxe configuration in /tftpboot/xcat/xnba/nodes? Currently
> the gpxe boot configuration for the node I'm trying to deploy Centos7.1 to
> looks like this:
>
> #!gpxe
> #install centos7.1-x86_64-compute
> imgfetch -n kernel http://
> ${next-server}/tftpboot/xcat/osimage/centos7.1-x86_64-install-compute/vmlinuz
> imgload kernel
> imgargs kernel repo=http://10.20.0.101:80/install/centos7.1/x86_64 ks=
> http://10.20.0.101:80/install/autoinst/node0067c ksdevice=bootif cmdline
> console=tty0 console=ttyS0,115200n8r BOOTIF=01-${netX/machyp}
> imgfetch http://
> ${next-server}/tftpboot/xcat/osimage/centos7.1-x86_64-install-compute/initrd.img
> imgexec kernel
>
> I manually changed ksdevice to "bootif" just to make sure it was using the
> right interface (it was set to eth0 but Centos 7.1 got rid of "eth" for
> "em" didn't it?). Nonetheless, I think my kickstart is being sucessfully
> fetched, because I changed the disk formatting commands in the kickstart
> and when I removed "quiet" from the boot I saw errors related to disk
> formatting/partitioning. So I'm partial to thinking that the old Centos 6.4
> kickstart configuration is not 100% compatible with Centos 7.1, but I want
> to double check to see what xCAT 2.10 bring to the table that might be
> necessary for Centos 7.1 deployment. Comments or thoughts?
>
> Regards,
> Josh
>
> On Fri, Oct 23, 2015 at 1:44 PM, Russell Auld <[email protected]>
> wrote:
>
>> Looks like xcatdsklspost does get called even for stateful installs. Look
>> at the script header.
>> Usually in cases like this, the issue is that the node being imaged can't
>> resolve the name of the master node. Make sure your dns is working properly.
>>
>> On Oct 23, 2015 12:52 PM, "Heald, Nathan T." <[email protected]> wrote:
>> >
>> > To follow up:
>> >
>> > I have resolved the pxe problem by upgrading further to xcat 2.10. Now
>> it sets kickstart parameters that centos7 responds to.
>> >
>> > However I have a new problem, the rinstall is now looping. I’ve gotten
>> as far as seeing that "/xcatpost” is never created on my stateful install.
>> The xcat debugging page suggests networking problems as the first thing to
>> check. So far I’ve not found anything on that front. I can’t find what
>> specifically creates /xcatpost during the install. I see that /opt/xcat was
>> created which contains the scripts xcatdsklspost and xcatinstallpost. Only
>> the script xcatdsklspost has the line “mkdir /$xcatpost”, I would not
>> expect this script to be executed since this is not a diskless install.
>> “xcatinstallpost” starts trying to download stuff to /xcatpost but there’s
>> nothing in this script that creates this directory.
>> >
>> > Suggestions?
>> >
>> > Thanks,
>> > -Nathan
>> >
>> >
>> > From: Nathan Heald <[email protected]>
>> > Reply-To: "[email protected]" <
>> [email protected]>
>> > Date: Tuesday, October 13, 2015 at 5:30 PM
>> > To: "[email protected]" <[email protected]>
>> > Subject: [xcat-user] xCAT 2.9.1, problem kickstarting centos7
>> >
>> > Greetings,
>> >
>> > I’m trying to get a working statefull install of centos7 on generic
>> hardware. This management node started out with xCAT 2.8.4, I have upgraded
>> it to 2.9.1 to try to get this working. Of course the parameters of the
>> RH/centos 7 kickstart have changed necessitating the upgrade. I found this
>> url indicating that as of 2.9 xcat should know know how to handle
>> RH/centos7:
>> > http://sourceforge.net/p/xcat/bugs/4318/
>> >
>> > However, I’m not able to trick xcat into setting up my pxe file
>> correctly when I run the nodeset for the host I want to install. I get this
>> in my /tftpboot/pxelinux.cfg/host01 file:
>> > …
>> > APPEND initrd=xcat/osimage/centos7-x86_64-install-compute/initrd.img
>> quiet repo=http://192.168.0.1:80/install/centos7/x86_64 ks=
>> http://192.168.0.1:80/install/autoinst/host01 ksdevice=2C:44:FD:00:00:00
>> > …
>> >
>> > But I’m expecting something more like this which should be supported by
>> centos7:
>> > …
>> > APPEND initrd=xcat/osimage/centos7-x86_64-install-compute/initrd.img
>> quiet inst.repo=http://192.168.0.1:80/install/centos7/x86_64 ks=
>> http://192.168.0.1:80/install/autoinst/host01 ksdevice=2C:44:FD:00:00:00
>> > …
>> >
>> > It looks like the updated xCAT code is trying to match “7.0" in $os for
>> the host definition. It appears that $os was set to “centos7” at some point
>> when I either ran copycds or ran a nodeset. I’ve tried a few different
>> iterations to see if I can tickle this into working to no avail.
>> >
>> > Any suggestions would be appreciated.
>> >
>> > Thanks,
>> > -Nathan
>> >
>>
>> ------------------------------------------------------------------------------
>> _______________________________________________
>> xCAT-user mailing list
>> [email protected]
>> https://lists.sourceforge.net/lists/listinfo/xcat-user
>>
>
>
------------------------------------------------------------------------------
Go from Idea to Many App Stores Faster with Intel(R) XDK
Give your users amazing mobile app experiences with Intel(R) XDK.
Use one codebase in this all-in-one HTML5 development environment.
Design, debug & build mobile apps & 2D/3D high-impact games for multiple OSs.
http://pubads.g.doubleclick.net/gampad/clk?id=254741551&iu=/4140
_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user
