We got an empty N1200 from Lenovo some time back in anticipation of new
nodes arriving this summer. In previous times, Lenovo would program the
FPCs with some internal address as a part of their cluster solution
(172.30.101.141 for example).
This empty chassis does not have its IP recorded in the paperwork we
received from Lenovo on delivery of the rack.
I am trying to configure this FPC using configfpc command and if I try
using the defaults: configfpc -i bond0 I get no default IP found.
I see the FPC on the switch port and I see its mac:
qfivebnt08#show mac-address-table interface port 42
MAC address VLAN Port Trnk State Permanent Openflow
----------------- -------- ------- ---- ----- --------- --------
6c:ae:8b:5e:56:14 1 42 FWD N
I also have the fpc configured for the right switch port in xCAT:
[root@mgt ~]# lsdef qfpc24
Object name: qfpc24
bmc=qfpc24
bmcpassword=PASSW0RD
bmcusername=USERID
cons=ipmi
groups=rack-t22fpc,qfpc,all
ip=172.30.11.24
mgt=ipmi
nodetype=qfpc
postbootscripts=otherpkgs,setupntp
postscripts=syslog,remoteshell,syncfiles
switch=qfivebnt08
switchport=42
I suspect this FPC is configured with some other IP (other than default)
but I don't know what that IP is since it's not documented. Any way of
programing the FPC if I don't have the IP?
Thanks,
Damir
------------------------------------------------------------------------------
What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
patterns at an interface-level. Reveals which users, apps, and protocols are
consuming the most bandwidth. Provides multi-vendor support for NetFlow,
J-Flow, sFlow and other flows. Make informed decisions using capacity
planning reports. https://ad.doubleclick.net/ddm/clk/305295220;132659582;e
_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user
