Here is "ip addr" from my desktop:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group
default qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: enp2s0f0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN
group default qlen 1000
link/ether c8:2a:14:37:20:0c brd ff:ff:ff:ff:ff:ff
3: wlp3s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP
group default qlen 1000
link/ether e4:ce:8f:15:fb:12 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.68/24 brd 192.168.1.255 scope global dynamic wlp3s0
valid_lft 84106sec preferred_lft 84106sec
inet6 fe80::e73a:370a:d3bb:1037/64 scope link
valid_lft forever preferred_lft forever
4: virbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state
DOWN group default qlen 1000
link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0
valid_lft forever preferred_lft forever
5: virbr0-nic: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast
master br1 state DOWN group default qlen 1000
link/ether 52:54:00:81:29:75 brd ff:ff:ff:ff:ff:ff
7: br1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN
group default qlen 1000
link/ether 52:54:00:81:29:75 brd ff:ff:ff:ff:ff:ff
8: virbr1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP
group default qlen 1000
link/ether fe:54:00:1c:fb:c0 brd ff:ff:ff:ff:ff:ff
inet 192.168.121.1/24 brd 192.168.121.255 scope global virbr1
valid_lft forever preferred_lft forever
9: virbr1-nic: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast state DOWN group
default qlen 1000
link/ether 52:54:00:fd:f8:10 brd ff:ff:ff:ff:ff:ff
10: virbr2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP
group default qlen 1000
link/ether fe:54:00:3f:cb:cc brd ff:ff:ff:ff:ff:ff
inet 10.0.0.1/24 brd 10.0.0.255 scope global virbr2
valid_lft forever preferred_lft forever
11: virbr2-nic: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast state DOWN
group default qlen 1000
link/ether 52:54:00:79:0c:4a brd ff:ff:ff:ff:ff:ff
18: vnet0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master
virbr1 state UNKNOWN group default qlen 1000
link/ether fe:54:00:6e:fa:04 brd ff:ff:ff:ff:ff:ff
inet6 fe80::fc54:ff:fe6e:fa04/64 scope link
valid_lft forever preferred_lft forever
19: vnet1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master
virbr2 state UNKNOWN group default qlen 1000
link/ether fe:54:00:fb:04:c8 brd ff:ff:ff:ff:ff:ff
inet6 fe80::fc54:ff:fefb:4c8/64 scope link
valid_lft forever preferred_lft forever
20: vnet2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master
virbr1 state UNKNOWN group default qlen 1000
link/ether fe:54:00:1c:fb:c0 brd ff:ff:ff:ff:ff:ff
inet6 fe80::fc54:ff:fe1c:fbc0/64 scope link
valid_lft forever preferred_lft forever
21: vnet3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master
virbr2 state UNKNOWN group default qlen 1000
link/ether fe:54:00:94:74:6b brd ff:ff:ff:ff:ff:ff
inet6 fe80::fc54:ff:fe94:746b/64 scope link
valid_lft forever preferred_lft forever
22: vnet4: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master
virbr1 state UNKNOWN group default qlen 1000
link/ether fe:54:00:b6:a8:b6 brd ff:ff:ff:ff:ff:ff
inet6 fe80::fc54:ff:feb6:a8b6/64 scope link
valid_lft forever preferred_lft forever
23: vnet5: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master
virbr2 state UNKNOWN group default qlen 1000
link/ether fe:54:00:3f:cb:cc brd ff:ff:ff:ff:ff:ff
inet6 fe80::fc54:ff:fe3f:cbcc/64 scope link
valid_lft forever preferred_lft forever
And here's from my virtual machine:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group
default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP
group default qlen 1000
link/ether 52:54:00:1c:fb:c0 brd ff:ff:ff:ff:ff:ff
inet 192.168.121.153/24 brd 192.168.121.255 scope global eth0
valid_lft forever preferred_lft forever
inet6 fe80::5054:ff:fe1c:fbc0/64 scope link
valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP
group default qlen 1000
link/ether 52:54:00:94:74:6b brd ff:ff:ff:ff:ff:ff
inet 10.0.0.10/24 brd 10.0.0.255 scope global eth1
valid_lft forever preferred_lft forever
inet6 fe80::5054:ff:fe94:746b/64 scope link
valid_lft forever preferred_lft forever
4: virbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state
DOWN group default
link/ether 6e:3e:9c:b1:5c:77 brd ff:ff:ff:ff:ff:ff
inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0
valid_lft forever preferred_lft forever
And here's the "lsdef vm2":
root@master:~# lsdef vm2
Object name: vm2
groups=compute,all
installnic=mac
mac=52:54:00:fb:04:c8
mgt=kvm
netboot=pxe
postbootscripts=otherpkgs
postscripts=syslog,remoteshell,syncfiles
primarynic=mac
serialport=0
serialspeed=115200
vmcpus=2
vmhost=thehost
vmmemory=1024
vmnicnicmodel=virtio
vmnics=virbr0
________________________________
From: Jarrod Johnson <jjohns...@lenovo.com>
Sent: Saturday, March 4, 2017 1:38 PM
To: xCAT Users Mailing list
Subject: Re: [xcat-user] vm2: Error: Cannot communicate via libvirt to 127.0.0.1
On the desktop system, run ip addr
Also run it inside the virtual machine.
There should be an address that starts with the same bytes. Use the value from
the desktop as ‘vm.host’
From: Nora D [mailto:uniqu...@live.com]
Sent: Saturday, March 04, 2017 8:35 AM
To: xCAT Users Mailing list
Subject: Re: [xcat-user] vm2: Error: Cannot communicate via libvirt to 127.0.0.1
How can I do that?
On Mar 4, 2017, at 4:26 PM, Jarrod Johnson
<jjohns...@lenovo.com<mailto:jjohns...@lenovo.com>> wrote:
What is the address of your desktop relative to the xcat master?
xCAT master reaching out to 127.0.0.1 will address the virtual machine itself,
rather than your desktop.
From: Nora D [mailto:uniqu...@live.com]
Sent: Saturday, March 04, 2017 8:21 AM
To: xCAT Users Mailing list
Subject: Re: [xcat-user] vm2: Error: Cannot communicate via libvirt to 127.0.0.1
I didn't get your answer can you elaborate please what should I do?
I have xCAT on a master VM not on the hypervisor which is my localhost machine.
The issue is frustrating me please help me.
Sent from my iPhone
On Mar 4, 2017, at 4:18 PM, Jarrod Johnson
<jjohns...@lenovo.com<mailto:jjohns...@lenovo.com>> wrote:
Nodels vm2 vm.host
Note you do not need xcat on the hypervisors, you anly need it in one place.
From: Nora D [mailto:uniqu...@live.com]
Sent: Saturday, March 04, 2017 2:56 AM
To: xcat-user@lists.sourceforge.net<mailto:xcat-user@lists.sourceforge.net>
Subject: [xcat-user] vm2: Error: Cannot communicate via libvirt to 127.0.0.1
I have Ubuntu 16 LTS (Desktop) as my local host machine. I installed KVM to
create virtual machines.
I have 3 virtual machines; one of them is acting as a master node to control
the other slave nodes (xCAT installed in the master node to control the slaves).
When I try to rpower off a slave node from the master node, the following error
occurs:
vm2: Error: Cannot communicate via libvirt to 127.0.0.1
When I researched there were many probabilities that may cause the issue:
unauthorized ssh, firewall, ports, etc.
I tried a lot of things but I felt lost and I'm just a beginner to the
open-source world. Can someone help me please with exact details and specific
commands?
Also, is there any way that I can reset my libvirt settings to the default
settings? Because I think I messed up some stuff which made the libvirt service
won't start.
Please help me ASAP.
Thanks.
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org<http://SlashDot.org>! http://sdm.link/slashdot
_______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net<mailto:xCAT-user@lists.sourceforge.net>
https://lists.sourceforge.net/lists/listinfo/xcat-user
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org<http://SlashDot.org>! http://sdm.link/slashdot
_______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net<mailto:xCAT-user@lists.sourceforge.net>
https://lists.sourceforge.net/lists/listinfo/xcat-user
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
_______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
