it turns out telnet session was disabled - here is how we fixed it:


On Thu, Jul 20, 2017 at 1:57 AM Nicolas Roosen <nicolas.roo...@hpe.com>
wrote:

> Hi,
>
> On 07/20/2017 04:31 AM, Damir Krstic wrote:
> > Hi all,
> >
> > We just got couple of new x3650 servers in and discovering them went
> > without a problem. Running bmcsetup worked ok too. For some reason after
> > the bmc setup was done, the interface was still in dedicated mode and
> > per Jarrod's instructions some time ago, I was able to change it to
> > shared. What Jarrod asked me, back in 2015 to do was to ssh to the node
> > while bmcsetup was running and execute following command:
> > ipmitool raw 0xc 1 1 0xc0 0
> >
>
> you can try to "reset" the BMC:
>
> ipmitool mc reset warm (or "cold" if a warm reset is not enough).
>
>
> Or maybe the raw command changed since there are new servers (and new
> BMCs firmware I guess)?
>
> On a Supermicro I had to run this from the OS to set the BMC to shared:
>
> ipmitool raw 0x30 0x70 0x0c 1 1
>
> And to check the actual value:
>
> ipmitool raw 0x30 0x70 0x0c 0
>
>
> Nicolas
>
> > This sets the interface to the shared mode. I did that and it looks OK.
> > However, telnet <node>-bmc I get connection refused and I don't recall
> > ever getting this message before.
> >
> > Any help is appreciated.
> >
> > Thanks,
> > Damir
> >
>
>
> ------------------------------------------------------------------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> _______________________________________________
> xCAT-user mailing list
> xCAT-user@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/xcat-user
>
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user

Reply via email to