I restored the line, but see the same error after node provisioning and reboot. The "install nic" gets the correct IP and the 'xnba.kpxe' file but doesn't boot to disk as it should. Then the second interface starts requesting DHCP:
Oct 4 10:32:59 admwqamgr dhcpd: DHCPDISCOVER from 90:e2:ba:74:90:a4 via enp130s0f0
Oct 4 10:32:59 admwqamgr dhcpd: DHCPOFFER on 192.168.40.7 to 90:e2:ba:74:90:a4 via enp130s0f0
Oct 4 10:33:03 admwqamgr dhcpd: DHCPREQUEST for 192.168.40.7 (192.168.40.4) from 90:e2:ba:74:90:a4 via enp130s0f0
Oct 4 10:33:03 admwqamgr dhcpd: DHCPACK on 192.168.40.7 to 90:e2:ba:74:90:a4 via enp130s0f0
Oct 4 10:33:03 admwqamgr in.tftpd[110050]: RRQ from 192.168.40.7 filename xcat/xnba.kpxe
Oct 4 10:33:03 admwqamgr in.tftpd[110050]: tftp: client does not accept options
Oct 4 10:33:03 admwqamgr in.tftpd[110051]: RRQ from 192.168.40.7 filename xcat/xnba.kpxe
Oct 4 10:33:03 admwqamgr in.tftpd[110051]: Client 192.168.40.7 finished xcat/xnba.kpxe
Oct 4 10:33:03 admwqamgr dhcpd: DHCPDISCOVER from 90:e2:ba:74:90:a4 via enp130s0f0
Oct 4 10:33:03 admwqamgr dhcpd: DHCPOFFER on 192.168.40.7 to 90:e2:ba:74:90:a4 via enp130s0f0
Oct 4 10:33:03 admwqamgr dhcpd: DHCPREQUEST for 192.168.40.7 (192.168.40.4) from 90:e2:ba:74:90:a4 via enp130s0f0
Oct 4 10:33:03 admwqamgr dhcpd: DHCPACK on 192.168.40.7 to 90:e2:ba:74:90:a4 via enp130s0f0
Oct 4 10:33:25 admwqamgr dhcpd: DHCPDISCOVER from 00:1e:67:8e:df:39 via enp130s0f0
Oct 4 10:33:26 admwqamgr dhcpd: DHCPOFFER on 192.168.40.82 to 00:1e:67:8e:df:39 via enp130s0f0
Oct 4 10:33:29 admwqamgr dhcpd: DHCPREQUEST for 192.168.40.82 (192.168.40.4) from 00:1e:67:8e:df:39 via enp130s0f0
Oct 4 10:33:29 admwqamgr dhcpd: DHCPACK on 192.168.40.82 to 00:1e:67:8e:df:39 via enp130s0f0
As you can see the file for the compute node got updated properly after the install:
[root@admwqamgr ~]# cat /tftpboot/xcat/xnba/nodes/adqan001
#!gpxe
#boot
exit
Regards,
Saurabh
From: "Casandra H Qiu" <cxh...@us.ibm.com>
To: xCAT Users Mailing list <xcat-user@lists.sourceforge.net>
Date: 04-10-2017 19:23
Subject: Re: [xcat-user] RHEL-7.3 provisioning error
Hi, Saurabh:
(5) From the compute node installation template provided by xCAT, I've removed the following line as the script called here enables all network interfaces and disables NetworkManager
echo "Running Kickstart Post-Installation script..."
#INCLUDE:#ENV:XCATROOT#/share/xcat/install/scripts/post.xcat#
#INCLUDE:#ENV:XCATROOT#/share/xcat/install/scripts/post.rhels7# <<<<------- Deleted this line
Can u add this line back in and try again? you can enable the NetworkManager after node provisioned.
Thanks,
Casandra
...................................................................
Casandra Hong Qiu
Phone: (845) 433-9291, t/l 293-9291
Office: Building 8, 3-B-04
cxh...@us.ibm.com
From: Saurabh Barve <barve_saur...@cat.com>
To: xCAT Users Mailing list <xcat-user@lists.sourceforge.net>
Date: 10/04/2017 09:14 AM
Subject: Re: [xcat-user] RHEL-7.3 provisioning error
Hi,
Are there any other suggestions for this problem? Do I need to upgrade xCAT?
Thanks and regards,
Saurabh
From: Saurabh Barve <barve_saur...@cat.com>
To: xCAT Users Mailing list <xcat-user@lists.sourceforge.net>
Date: 29-09-2017 02:02
Subject: Re: [xcat-user] RHEL-7.3 provisioning error
CATERPILLAR SECURITY ALERT: The email address in the sender line does not match the account that sent the email. This can be an indication of phishing. Do not click links or open attachments unless you are certain it is from a safe source. Learn more at security.cat.com/phishing
I changed the file /tftpboot/pxelinux.cfg/adqan001 while the server was rebooting after a successful install. I saw the following error messages:
++++++++++++++++++++
Sep 27 04:59:28 admwqamgr dhcpd: DHCPDISCOVER from 90:e2:ba:74:90:a4 via enp130s0f0
Sep 27 04:59:28 admwqamgr dhcpd: DHCPOFFER on 192.168.40.7 to 90:e2:ba:74:90:a4 via enp130s0f0
Sep 27 04:59:30 admwqamgr dhcpd: DHCPREQUEST for 192.168.40.7 (192.168.40.4) from 90:e2:ba:74:90:a4 via enp130s0f0
Sep 27 04:59:30 admwqamgr dhcpd: DHCPACK on 192.168.40.7 to 90:e2:ba:74:90:a4 via enp130s0f0
Sep 27 04:59:30 admwqamgr in.tftpd[26557]: RRQ from 192.168.40.7 filename pxelinux.0
Sep 27 04:59:30 admwqamgr in.tftpd[26557]: tftp: client does not accept options
Sep 27 04:59:30 admwqamgr in.tftpd[26558]: RRQ from 192.168.40.7 filename pxelinux.0
Sep 27 04:59:30 admwqamgr in.tftpd[26558]: Client 192.168.40.7 finished pxelinux.0
Sep 27 04:59:30 admwqamgr in.tftpd[26559]: RRQ from 192.168.40.7 filename pxelinux.cfg/210b7774-c95c-11e2-a4f2-001e678edf39
Sep 27 04:59:30 admwqamgr in.tftpd[26559]: Client 192.168.40.7 File not found pxelinux.cfg/210b7774-c95c-11e2-a4f2-001e678edf39
Sep 27 04:59:30 admwqamgr in.tftpd[26560]: RRQ from 192.168.40.7 filename pxelinux.cfg/01-90-e2-ba-74-90-a4
Sep 27 04:59:30 admwqamgr in.tftpd[26560]: Client 192.168.40.7 File not found pxelinux.cfg/01-90-e2-ba-74-90-a4
Sep 27 04:59:30 admwqamgr in.tftpd[26561]: RRQ from 192.168.40.7 filename pxelinux.cfg/C0A82807
Sep 27 04:59:30 admwqamgr in.tftpd[26561]: Client 192.168.40.7 finished pxelinux.cfg/C0A82807
Sep 27 04:59:30 admwqamgr in.tftpd[26562]: RRQ from 192.168.40.7 filename chain.c32
Sep 27 04:59:30 admwqamgr in.tftpd[26562]: Client 192.168.40.7 File not found chain.c32
Sep 27 04:59:30 admwqamgr in.tftpd[26563]: RRQ from 192.168.40.7 filename chain.c32.cbt
Sep 27 04:59:30 admwqamgr in.tftpd[26563]: Client 192.168.40.7 File not found chain.c32.cbt
Sep 27 04:59:30 admwqamgr in.tftpd[26564]: RRQ from 192.168.40.7 filename chain.c32.0
Sep 27 04:59:30 admwqamgr in.tftpd[26564]: Client 192.168.40.7 File not found chain.c32.0
Sep 27 04:59:30 admwqamgr in.tftpd[26565]: RRQ from 192.168.40.7 filename chain.c32.com
Sep 27 04:59:30 admwqamgr in.tftpd[26565]: Client 192.168.40.7 File not found chain.c32.com
Sep 27 04:59:30 admwqamgr in.tftpd[26566]: RRQ from 192.168.40.7 filename chain.c32.c32
Sep 27 04:59:30 admwqamgr in.tftpd[26566]: Client 192.168.40.7 File not found chain.c32.c32
++++++++++++++++++++
I cannot run the command "# kusu-boothost -m compute000,compute001 " on my server; I assume that is possible only on an IBM machine?
Even if it worked, I assume that this fix would work if I chose 'pxe' as the provisioning method? What if I use 'xnba' as my provisioning method? Will I need to make a change to /tftpboot/xnba/nodes/adqan001 file? Would I have to do that manually while a node was rebooting after an install?
I upgraded my firmware to the latest one available. Tried provisioning again with xnba and ran into the same problem.
Regards,
Saurabh
From: Daniel Letai <d...@letai.org.il>
To: xcat-user@lists.sourceforge.net
Date: 27-09-2017 13:50
Subject: Re: [xcat-user] RHEL-7.3 provisioning error
Try modifying the pxe file according to https://www.ibm.com/mysupport/s/article/ka150000000H5ohAAC/Problem-booting-from-local-disk-after-node-provisioning
That is:
in /tftpboot/pxelinux.cfg/adqan001
change:
label xCAT
localboot 0
to:
label xCAT
kernel chain.c32
append hd0
On 09/26/2017 04:24 PM, Saurabh Barve wrote:
>>>>What’s the updatestatus of the compute node after that first successful PXE and Anaconda run? Check it with “lsdef adqan001”. Also what is the value of currchain after Anaconda runs and the machine reboots?
Here's the update status of the node while the OS is installing on it (I've kept only the entries that I thought were relevant to the question):
[root@admwqamgr ~]# lsdef adqan001
Object name: adqan001
addkcmdline=edd=off ipv6.disable=1
arch=x86_64
currchain=boot
currstate=install rhels7.3-x86_64-compute
installnic=eth4
interface=eth4
ip=192.168.40.7
mac=90:E2:BA:74:90:A4
netboot=xnba
nfsdir=/install
nfsserver=admwqamgr
os=rhels7.3
postscripts=syslog,remoteshell
primarynic=eth4
profile="">
provmethod=cat-compute-rhels7.3-x86_64
status=installing
statustime=09-26-2017 08:09:13
tftpdir=/tftpboot
tftpserver=admwqamgr
updatestatus=synced
updatestatustime=09-05-2017 11:15:23
Here's the status of the node after OS installation completes and the machine reboots (this is where it gets stuck):
[root@admwqamgr ~]# lsdef adqan001
Object name: adqan001
addkcmdline=edd=off ipv6.disable=1
arch=x86_64
currchain=boot
currstate=boot
installnic=eth4
interface=eth4
ip=192.168.40.7
mac=90:E2:BA:74:90:A4
netboot=xnba
nfsdir=/install
nfsserver=admwqamgr
os=rhels7.3
postscripts=syslog,remoteshell
primarynic=eth4
profile="">
provmethod=cat-compute-rhels7.3-x86_64
status=booting
statustime=09-26-2017 08:17:25
tftpdir=/tftpboot
tftpserver=admwqamgr
updatestatus=synced
updatestatustime=09-05-2017 11:15:23
>>>> Are your DNS settings correct? Can the compute node resolve the master node in the Anaconda shell? Forward and reverse DNS must work.
Yes. If I manually boot the node to disk after the install, it boots into the OS. After logging in to the compute node, I can verify that forward and reverse DNS are working fine. I also tried specifying the IP address of the xCAT management node instead of its name in the 'noderes' table but got the same result.
>>>> What’s in the PXE file on the master node after the Anaconda run? /tftpboot/pxelinux.cfg/adqan001
Here you go:
[root@admwqamgr ~]# cat /tftpboot/pxelinux.cfg/adqan001
#boot
DEFAULT xCAT
LABEL xCAT
LOCALBOOT 0
>>>> At the end of the postscripts run the ‘updatestatus.awk’ script needs to work – that’s what calls back to the master node and updates the status of the node
Does this need to be run manually? My postscripts table is pretty simple:
[root@admwqamgr ~]# tabdump postscripts
#node,postscripts,postbootscripts,comments,disable
"compute","syslog,remoteshell",,,
Regards,
Saurabh
From: <russa...@comcast.net>
To: "'xCAT Users Mailing list'" <xcat-user@lists.sourceforge.net>
Date: 26-09-2017 18:11
Subject: Re: [xcat-user] RHEL-7.3 provisioning error
What’s the updatestatus of the compute node after that first successful PXE and Anaconda run? Check it with “lsdef adqan001”. Also what is the value of currchain after Anaconda runs and the machine reboots?
Are your DNS settings correct? Can the compute node resolve the master node in the Anaconda shell? Forward and reverse DNS must work.
What’s in the PXE file on the master node after the Anaconda run? /tftpboot/pxelinux.cfg/adqan001
That file is what instructs the machine to boot from disk.
At the end of the postscripts run the ‘updatestatus.awk’ script needs to work – that’s what calls back to the master node and updates the status of the node.
From: Saurabh Barve [mailto:barve_saur...@cat.com]
Sent: Tuesday, September 26, 2017 5:15 AM
To: xcat-user@lists.sourceforge.net
Subject: [xcat-user] RHEL-7.3 provisioning error
Hi,
I'm trying to deploy RHEL-7.3 on my cluster compute nodes but running into problems with PXE after the node is successfully installed.
These are the details of my xCAT management node:
[root@admwqamgr ~]# cat /etc/redhat-release
Red Hat Enterprise Linux Server release 7.3 (Maipo)
[root@admwqamgr ~]# uname -r
3.10.0-514.26.2.el7.x86_64
[root@admwqamgr ~]# lsxcatd -a
Version 2.13.4 (git commit 6ee3741498768994e4bb10d2a77c9699bcabde90, built Tue May 16 10:03:13 EDT 2017)
This is a Management Node
cfgloc=Pg:dbname=xcatdb;host=192.168.40.4|xcatadm
dbengine=Pg
dbname=xcatdb
dbhost=192.168.40.4
dbadmin=xcatadm
My compute nodes have six interfaces:
--> 4 1GbE interfaces --- eno1 (eth0), eno2 (eth1), eno3 (eth2), eno4 (eth3)
--> 2 10GbE interfaces --- enp130s0f0 (eth4), enp130s0f0 (eth5)
Two things about the network:
(i) I'm deploying the compute nodes over the "eth4" interface
(ii) There is network connectivity on both eth0 and eth4 - this is beyond my control
The boot order for the node as specified in the BIOS is:
enp130s0f0 (eth4)
enp130s0f0 (eth5)
eno1 (eth0)
eno2 (eth1)
eno3 (eth2)
eno4 (eth3)
HDD 1
HDD 2
HDD 3
HDD 4
The xCAT management node provides both the DHCP and DNS services for the cluster. I have NetworkManager running on the xCAT management node. IPV6 is disabled on the xCAT management node.
I also want to use NetworkManager on the compute nodes.
- Problem
I deploy the node using the commands:
nodeset adqan001 osimage=compute-rhels7.3-x86_64
rsetboot adqan001 net
rpower adqan001 on
The node deploys over eth4 without any problem. However, when it reboots after the installation, the node doesn't boot from disk. I see the following error messages in the logs on the xCAT management server:
+++++++++++++++++++
Sep 25 13:34:28 admwqamgr dhcpd: DHCPDISCOVER from 90:e2:ba:74:90:a4 via enp130s0f0
Sep 25 13:34:28 admwqamgr dhcpd: DHCPOFFER on 192.168.40.7 to 90:e2:ba:74:90:a4 via enp130s0f0
Sep 25 13:34:28 admwqamgr dhcpd: DHCPREQUEST for 192.168.40.7 (192.168.40.4) from 90:e2:ba:74:90:a4 via enp130s0f0
Sep 25 13:34:28 admwqamgr dhcpd: DHCPACK on 192.168.40.7 to 90:e2:ba:74:90:a4 via enp130s0f0
Sep 25 13:34:50 admwqamgr dhcpd: DHCPDISCOVER from 00:1e:67:8e:df:39 via enp130s0f0
Sep 25 13:34:51 admwqamgr dhcpd: DHCPOFFER on 192.168.40.82 to 00:1e:67:8e:df:39 via enp130s0f0
Sep 25 13:34:54 admwqamgr dhcpd: DHCPREQUEST for 192.168.40.82 (192.168.40.4) from 00:1e:67:8e:df:39 via enp130s0f0
Sep 25 13:34:54 admwqamgr dhcpd: DHCPACK on 192.168.40.82 to 00:1e:67:8e:df:39 via enp130s0f0
Sep 25 13:34:54 admwqamgr in.tftpd[7342]: RRQ from 192.168.40.82 filename xcat/xnba.kpxe
Sep 25 13:34:54 admwqamgr in.tftpd[7342]: tftp: client does not accept options
Sep 25 13:34:54 admwqamgr in.tftpd[7343]: RRQ from 192.168.40.82 filename xcat/xnba.kpxe
Sep 25 13:34:54 admwqamgr in.tftpd[7343]: Client 192.168.40.82 finished xcat/xnba.kpxe
Sep 25 13:34:54 admwqamgr dhcpd: DHCPDISCOVER from 00:1e:67:8e:df:39 via enp130s0f0
Sep 25 13:34:55 admwqamgr dhcpd: DHCPOFFER on 192.168.40.80 to 00:1e:67:8e:df:39 via enp130s0f0
Sep 25 13:34:55 admwqamgr dhcpd: DHCPREQUEST for 192.168.40.80 (192.168.40.4) from 00:1e:67:8e:df:39 via enp130s0f0
Sep 25 13:34:55 admwqamgr dhcpd: DHCPACK on 192.168.40.80 to 00:1e:67:8e:df:39 via enp130s0f0
Sep 25 13:35:31 admwqamgr dhcpd: DHCPDISCOVER from 00:1e:67:8e:df:39 via enp130s0f0
Sep 25 13:35:31 admwqamgr dhcpd: DHCPOFFER on 192.168.40.82 to 00:1e:67:8e:df:39 via enp130s0f0
Sep 25 13:35:31 admwqamgr dhcpd: DHCPREQUEST for 192.168.40.82 (192.168.40.4) from 00:1e:67:8e:df:39 via enp130s0f0
Sep 25 13:35:31 admwqamgr dhcpd: DHCPACK on 192.168.40.82 to 00:1e:67:8e:df:39 via enp130s0f0
Sep 25 03:35:32 192.168.40.82 (none) dhclient[1054]: XMT: Solicit on eth0, interval 4170ms.
Sep 25 13:35:33 192.168.40.82 (none) ntpd[1633]: 0.0.0.0 c61c 0c clock_step +36000.081070 s
Sep 25 13:35:33 192.168.40.82 (none) ntpd[1633]: 0.0.0.0 c614 04 freq_mode
Sep 25 13:35:34 192.168.40.82 (none) ntpd[1633]: 0.0.0.0 c618 08 no_sys_peer
Sep 25 13:35:36 192.168.40.82 (none) dhclient[1922]: DHCPDISCOVER on eth4 to 255.255.255.255 port 67 interval 7 (xid=0x3fd26f33)
Sep 25 13:35:36 192.168.40.82 (none) dhclient[1054]: XMT: Solicit on eth0, interval 8110ms.
Sep 25 13:35:39 192.168.40.82 (none) dhclient[2017]: Bound to *:546
Sep 25 13:35:39 192.168.40.82 (none) dhclient[2017]: XMT: Solicit on eth4, interval 1010ms.
Sep 25 13:35:40 192.168.40.82 (none) dhclient[2017]: XMT: Solicit on eth4, interval 1970ms.
Sep 25 13:35:41 192.168.40.82 (none) ntpd[1633]: Listen normally on 6 eth4 fe80::92e2:baff:fe74:90a4 UDP 123
+++++++++++++++++++
192.168.40.7 is the address that the DHCP server is supposed to hand out to eth4 interface of the node with the MAC address 90:e2:ba:74:90:a4. But even after it gets the IP, the node doesn't boot to disk. The eth0 interface with the MAC address 00:1e:67:8e:df:39 then tries and succeeds in getting an IP address from the DHCP server. The node then ends up booting in the genesis shell.
- Additional xCAT configuration information
[root@admwqamgr ~]# tabdump noderes
#node,servicenode,netboot,tftpserver,tftpdir,nfsserver,monserver,nfsdir,installnic,primarynic,discoverynics,cmdinterface,xcatmaster,current_osimage,next_osimage,nimserver,routenames,nameservers,proxydhcp,syslog,comments,disable
"compute",,"xnba","admwqamgr","/tftpboot","admwqamgr",,"/install","eth4","eth4","eth4",,,,,,,,,,,
[root@admwqamgr ~]# tabdump mac
#node,interface,mac,comments,disable
"adqan001","eth4","90:E2:BA:74:90:A4",,
[root@admwqamgr ~]# tabdump bootparams
#node,kernel,initrd,kcmdline,addkcmdline,dhcpstatements,adddhcpstatements,comments,disable
"compute",,,,"edd=off ipv6.disable=1",,,,
I'm enabling and disabling the following services in my compute node template:
# System services
services --enabled="chronyd,NetworkManager,postfix,nfs,nfs-server" --disabled="firewalld"
- What I've tried so far
(1) As you can see in the 'bootparams' table above, I've disabled IPV6 for the newly deployed node
(2) I've also edited the /opt/xcat/lib/perl/xCAT/Template.pm and changed the line number 1066 to add "--noipv6" to the default Kickstart deployment parameter:
$line .= "dhcp --device=$suffix --noipv6";
(3) I've tried specifying both eth4 and enp130s0f0 in both the 'mac' and 'noderes' tables with the same result
(4) I've used both 'xnba' and 'pxe' as provisioning methods with the same result
(5) From the compute node installation template provided by xCAT, I've removed the following line as the script called here enables all network interfaces and disables NetworkManager
echo "Running Kickstart Post-Installation script..."
#INCLUDE:#ENV:XCATROOT#/share/xcat/install/scripts/post.xcat#
#INCLUDE:#ENV:XCATROOT#/share/xcat/install/scripts/post.rhels7# <<<<------- Deleted this line
:q
I can get the node to boot into PXE the first time and install without problems, but on the subsequent it doesn't boot to disk like it should. This configuration had worked very for me on RHEL-6.8, minus the NetworkManager.
Regards,
Saurabh------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! https://urldefense.proofpoint.com/v2/url?u=http-3A__sdm.link_slashdot&d=DQICAg&c=p0oa49nxxGtbbM2qgM-GB4r4m9OlGg-sEp8sXylY2aQ&r=y6oUgGLI3Va2WgIE-Qq68XsBjmVWtX92km0aTnDk-Go&m=DIoxyd1WtYURSpGirO0EdyK67bK3H_5sX3fX0_f0qeg&s=G5P6Lzta3_uG8XTUkU9jW7qOKfp1zSfKXDCpAEEOM3w&e= _______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://urldefense.proofpoint.com/v2/url?u=https-3A__lists.sourceforge.net_lists_listinfo_xcat-2Duser&d=DQICAg&c=p0oa49nxxGtbbM2qgM-GB4r4m9OlGg-sEp8sXylY2aQ&r=y6oUgGLI3Va2WgIE-Qq68XsBjmVWtX92km0aTnDk-Go&m=DIoxyd1WtYURSpGirO0EdyK67bK3H_5sX3fX0_f0qeg&s=S5TKtQ8OXHoID3ik4KT7Dth4FF3vNNIKWGIeAQUFra4&e=
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
--
[attachment "smime.p7s" deleted by Saurabh Barve/0A/Caterpillar]
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot_______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! https://urldefense.proofpoint.com/v2/url?u=http-3A__sdm.link_slashdot&d=DQICAg&c=p0oa49nxxGtbbM2qgM-GB4r4m9OlGg-sEp8sXylY2aQ&r=y6oUgGLI3Va2WgIE-Qq68XsBjmVWtX92km0aTnDk-Go&m=28gUQq3YopR53AxfuimikSofsplMpYxFvUxMid9nOyE&s=FVbpaqttcdRUXCkEqmj1WvaBCqFL9QJKlf5mP_ROXMc&e= _______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://urldefense.proofpoint.com/v2/url?u=https-3A__lists.sourceforge.net_lists_listinfo_xcat-2Duser&d=DQICAg&c=p0oa49nxxGtbbM2qgM-GB4r4m9OlGg-sEp8sXylY2aQ&r=y6oUgGLI3Va2WgIE-Qq68XsBjmVWtX92km0aTnDk-Go&m=28gUQq3YopR53AxfuimikSofsplMpYxFvUxMid9nOyE&s=7bv4ykS3DglmR-obaxhalZBbIm1lYQkhSlAxgKxqkTM&e=
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! https://urldefense.proofpoint.com/v2/url?u=http-3A__sdm.link_slashdot&d=DwICAg&c=jf_iaSHvJObTbx-siA1ZOg&r=n1LR_Py9TQX0dVqfGTbLHUMGx25-C8VtBDS0nCzyNXY&m=7FmSymBwk2RcNOKPzUP3YMePZdBR3R-VUW3-PwjrDqU&s=W6OCZzY3CYIJ4bpmY0lBM4lT1hRu8Oo3NP0XajOt1I0&e= _______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://urldefense.proofpoint.com/v2/url?u=https-3A__lists.sourceforge.net_lists_listinfo_xcat-2Duser&d=DwICAg&c=jf_iaSHvJObTbx-siA1ZOg&r=n1LR_Py9TQX0dVqfGTbLHUMGx25-C8VtBDS0nCzyNXY&m=7FmSymBwk2RcNOKPzUP3YMePZdBR3R-VUW3-PwjrDqU&s=mry3qJgAY7_xkQccZiQNZetR1tsdsH--pfPRffWy6no&e=
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! https://urldefense.proofpoint.com/v2/url?u=http-3A__sdm.link_slashdot&d=DQICAg&c=p0oa49nxxGtbbM2qgM-GB4r4m9OlGg-sEp8sXylY2aQ&r=y6oUgGLI3Va2WgIE-Qq68XsBjmVWtX92km0aTnDk-Go&m=7oTX4pZ6D9B-m8Gh7MFyK4H39__Q-w2FXW9kuWBFGF4&s=Rreab0qJJBn8UwJcqGRTmuhB38jlvYw3CTwqFzfj8vY&e= _______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://urldefense.proofpoint.com/v2/url?u=https-3A__lists.sourceforge.net_lists_listinfo_xcat-2Duser&d=DQICAg&c=p0oa49nxxGtbbM2qgM-GB4r4m9OlGg-sEp8sXylY2aQ&r=y6oUgGLI3Va2WgIE-Qq68XsBjmVWtX92km0aTnDk-Go&m=7oTX4pZ6D9B-m8Gh7MFyK4H39__Q-w2FXW9kuWBFGF4&s=NbsTCyYnUmuRZT9k25TEgnbpJ5UzPA9XxHFUFeWERmQ&e=
------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________ xCAT-user mailing list xCAT-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xcat-user