I have a management node with three NICs, and want to use makedns to
generate the DNS configuration.
My management node has three names, corresponding to the three NICs:
eth0: hpcmn-test.compute.sabre.kkeane.sandiego.edu
eth1: hpcmn-test.kkeane.sandiego.edu
eth2: hpcmn-test.imm.sabre.kkeane.sandiego.edu
hostname -f returns hpcmn-test.kkeane.sandiego.edu (which is name by which
my management node will be known on our public network).
I have the DNS server listening only on eth2. Consequently, the zones in
the DNS server should have the corresponding name server
hpcmn-test.imm.sabre.kkeane.sandiego.edu. However, the zones generated by
makedns -n instead use the hpcmn-test.kkeane.sandiego.edu name.
$TTL 86400
@ IN SOA hpcmn-test.kkeane.sandiego.edu. root.hpcmn-test.kkeane.sandiego.edu.
( 2017103100 10800 3600 604800 86400 )
IN NS hpcmn-test.kkeane.sandiego.edu.
This wreaks havoc with future calls to makedns; updates will time out
because the DNS server is not listening at the IP address that corresponds
to this name (and in fact, makehosts doesn't even put this name into
/etc/hosts)
How can I get makedns to generate zones with an NS record that points to
hpcmn-test.imm.sabre.kkeane.sandiego.edu ?
Thanks!
--
_______________________________________________________________________
Kevin Keane | Systems Architect | University of San Diego ITS |
kke...@sandiego.edu
Maher Hall, 192 |5998 Alcalá Park | San Diego, CA 92110-2492 | 619.260.6859
<%28619%29%20260-2298>
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
