Putting storcli64 in the genesis image should function. The driver in the
genesis image is sufficient to enable storcli64, and it has the needed
libraries.
Storcli64 is proprietary, so we don't bundle it in the rpm.
From: peter CZ1 Peng
Sent: Thursday, May 10, 2018 1:48 AM
To: xCAT Users Mailing list <xcat-user@lists.sourceforge.net>
Cc: Jarrod Johnson <jjohns...@lenovo.com>
Subject: ask for support the hardware raid in genesis image
Hi ,All
I check the xcat document and see that the xCAT have the support PPP64 with
iprconfig to configure the Hardware Raid in the genesis image
(https://github.com/xcat2/xcat-core/blob/1ad3a53108739f26531bdd52cd02da8ce68dff40/docs/source/advanced/raid/hardware_raid.rst
) , I would like to know if the genesis image will also support x86_64 system
, or is there anyone that can tell me how to integrated the MegaCli64 or
storcli64 command into the genesis image so we can setup the Hardware RAID in
the node discovery stage . it would be better if we can integrated some command
command into the genesis image like the lspci / dmidecode ,thanks
Peter CZ peng
Department :Complex Solution Rack TE
Address:ISH3 Shenzhen
Lenovo China
+86 86361590
+86 18129979128
609 1590
peng...@lenovo.com<mailto:zengd...@lenovo.com>
Lenovo.com /www.lenovo.com <http://www.lenovo.com/www.lenovo.com>
Twitter<http://twitter.com/lenovo> | Facebook |
Instagram<https://instagram.com/lenovo> | Blogs<http://blog.lenovo.com/> |
Forums<http://forums.lenovo.com/>
[Lenovo_2015]
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
