Yes, ipmi password is correct. 
No error message. console seems hangs where pressing anything does nothing.

cm-15 is up and running. Same on some nodes where console hangs. 

Thank you.

> On Jul 24, 2018, at 9:41 PM, Er Tao Zhao <erta...@cn.ibm.com> wrote:
> 
> So, the password is correct now, right?(The `ipmitool-xcat -H 172.17.110.15 
> -U USERID -P PASSWORD -I lanplus sol activate` shall not output error msg 
> like `Error: Unable to establish IPMI v2 / RMCP+ session`)
>  
> If yes, pls check the power status of the node with command `rpower 
> cloud-cm015 state`, make sure it is on.
>  
> Thx!
>  
> Best Regards,
> -----------------------------------
> Zhao Er Tao
> 
> IBM China System and Technology Laboratory, Beijing
> Tel:(86-10)82450485
> Email: erta...@cn.ibm.com
> Address: 1/F, 28 Building,ZhongGuanCun Software Park,
> No.8 DongBeiWang West Road, Haidian District,
> Beijing, 100193, P.R.China
>  
>  
> ----- Original message -----
> From: Rogie Pamintuan <rbpamint...@gmail.com>
> To: xCAT Users Mailing list <xcat-user@lists.sourceforge.net>
> Cc:
> Subject: Re: [xcat-user] rcons not working on some nodes
> Date: Tue, Jul 24, 2018 8:56 PM
>  
> Thanks Zhao Er Tao. Appreciate the response.
>  
> After running rcons cloud-cm015 > console seems hangs where pressing anything 
> does nothing.
>  
> After trying and running 'ipmitool-xcat -H 172.17.110.15 -U USERID -P 
> PASSW0RD -I lanplus sol activate’ > console still hangs.
>  
> Restarted conserver and the IMM on cloud-cm015 (via WebGUI), and still the 
> terminal hangs after rcons.
>  
> #‌ cat /etc/conserver.cf | grep cloud-cm015
> 
> #‌xCAT BEGIN cloud-cm015 CONS
> 
> console cloud-cm015 {
> 
>  exec /opt/xcat/share/xcat/cons/ipmi cloud-cm015;
> 
> #‌xCAT END cloud-cm015 CONS
> 
> #‌ rcons cloud-cm015
> [Enter `^Ec?' for help]
> 
> [disconnect]
> 
> #‌ chdef cloud-cm015 cons=ipmi
> 1 object definitions have been created or modified.
> 
> #‌ rcons cloud-cm015
> 
> [Enter `^Ec?' for help]
> 
> [disconnect]
> 
> #‌ lsdef cloud-cm015 | grep cons
>    cons=ipmi
> 
> The console still hangs...
> 
>  
> Thank you.
>  
>  
>  
>> 
>> On Jul 23, 2018, at 10:02 PM, Er Tao Zhao <erta...@cn.ibm.com> wrote:
>>  
>> Hi, Rogie
>>  
>> Based on the output below, want you to make sure the IP,username,password is 
>> correct for BMC of cloud-cm015.
>>  
>> `#‌ ipmitool-xcat -H 172.17.110.15 -U USERID -P PASSWORD -I lanplus sol 
>> activate 
>> Error: Unable to establish IPMI v2 / RMCP+ session 
>> Error: No response activating SOL payload
>> `  ==> Shall the password shall be 'PASSW0RD' (zero, not capital 'o')
>>  
>> Thx!
>> Best Regards,
>> -----------------------------------
>> Zhao Er Tao
>> 
>> IBM China System and Technology Laboratory, Beijing
>> Tel:(86-10)82450485
>> Email: erta...@cn.ibm.com
>> Address: 1/F, 28 Building,ZhongGuanCun Software Park,
>> No.8 DongBeiWang West Road, Haidian District,
>> Beijing, 100193, P.R.China
>>  
>>  
>> ----- Original message -----
>> From: Rogie Pamintuan <rbpamint...@gmail.com>
>> To: xCAT Users Mailing list <xcat-user@lists.sourceforge.net>
>> Cc:
>> Subject: [xcat-user] rcons not working on some nodes
>> Date: Mon, Jul 23, 2018 11:06 PM
>>  
>> Hi All,
>>  
>> How to properly troubleshot rcons issues?
>>  
>> Background: We’ve discovered that there are missing node(s) entries in 
>> conserver.cf. Rebuilt conserver.cf by adding serialport=0 and 
>> serialspeed=115200 and run makeconservercf. rcons works now on some nodes 
>> but still having issue with other nodes.
>>  
>> Environment:
>> OS: rhel6.10
>> HW: Lenovo Flex System x240 Compute Node & Lenovo System x3650 M4
>> XCAT: 2.8.5
>> IPMI-XCAT: ipmitool-xcat-1.8.11-3.x86_64
>> 
>> Firmware Levels:
>> system> vpd uefi
>> Type                    Version             BuildID         ReleaseDate
>> ----                    -------             -------         -----------
>> UEFI(Active)            2.60                VVE158FUS       2018/02/23
>> UEFI(Primary)           2.60                VVE158FUS       2018/02/23
>> UEFI(Backup)            1.60                VVE136AUS       2013/12/12
>> 
>> system> vpd imm
>> Type                    Version             BuildID         ReleaseDate
>> ----                    -------             -------         -----------
>> IMM2(Active)            6.60                1AOO82E         2018/01/17
>> IMM2(Primary)           6.60                1AOO82E         2018/01/17
>> IMM2(Backup)            6.60                1AOO82E         2018/01/17
>> 
>> [root@mgmt1 ~]#‌ rcons cloud-cm015
>> [Enter `^Ec?' for help]
>> > nothing for error
>> > There is no /var/log/consoles log on cloud-cm015
>> 
>> Used ipmitool-xcat to connect to sol on cloud-cm015:
>> #‌ ipmitool-xcat -H 172.17.110.15 -U USERID -P PASSWORD -I lanplus sol 
>> activate
>> Error: Unable to establish IPMI v2 / RMCP+ session
>> Error: No response activating SOL payload
>>  
>> Appreciate any help. Thank you.
>> ------------------------------------------------------------------------------
>> Check out the vibrant tech community on one of the world's most
>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>> _______________________________________________
>> xCAT-user mailing list
>> xCAT-user@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/xcat-user
>>  
>> 
>> ------------------------------------------------------------------------------
>> Check out the vibrant tech community on one of the world's most
>> engaging tech sites, Slashdot.org! 
>> http://sdm.link/slashdot_______________________________________________
>> xCAT-user mailing list
>> xCAT-user@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/xcat-user
> 
> ------------------------------------------------------------------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> _______________________________________________
> xCAT-user mailing list
> xCAT-user@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/xcat-user
>  
> 
> ------------------------------------------------------------------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> _______________________________________________
> xCAT-user mailing list
> xCAT-user@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/xcat-user
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user

Reply via email to