Thank you for all these enhancements. I have a question that in the past was answered “no”…. Is there a way to get your golden image from a node that is netbooted? Previously I would have to drive a mile, find a parking spot, find a used drive lying around, push it into an idle node, etc….. The only time I need to do this is when the image I want to build is newer kernel or different architecture from the management node.
Thanks again, — ddj Dave Johnson > On Oct 24, 2018, at 4:28 AM, Olivier Lahaye <olivier.laha...@free.fr> wrote: > > Hi, > > I’m the main active developper for systemimager and saw some questions about > it in this mailing list. > 1st of all, the new systemimager has nothing to do with the old one regarding > the imager which is now generated using dracut and has a GUI based on > Plymouth (optional when running) > See https://github.com/finley/SystemImager/wiki > <https://github.com/finley/SystemImager/wiki> > > The quick start guide and screenshot sections are the only one that are up to > date. > > You’ll notice that now, systemimager is able to deploy and run the os without > a single reboot! > > The currently supported OS are RHEL/CentOS 6 and 7, Fedora 27, 28, Upcomming > 29 and OpenSUSE 42.3 and newer. > > It could/should work on deb distros if I had time to do packaging and if > dracut can be installed aside initramfstools without conflicts. It is planned > and will work on all deb distros that have dracut and Plymouth package. I > have no date for availability as it depends on my spare time. (Feel free to > join if you have deb packaging and rpm spec knowledge to port it to Debian > dir structure (mainly dependency helpers to port from rpm to deb)) > > Regards, > — > Olivier Lahaye > _______________________________________________ > xCAT-user mailing list > xCAT-user@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/xcat-user
_______________________________________________ xCAT-user mailing list xCAT-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xcat-user
