On 2/18/19 4:30 PM, Thomas HUMMEL wrote:
Hello,
I'll try to sum up here (sorry for the new thread) the quesions I have
left about nics in a stateless mode after some (unsuccessfull) tests and
posts.
Thanks everyone for your time and help.
So basically here's my conclusion (I'm very confused) :
in short, my guess is that xCAT discovery is not meant to deal 2 nics on
the same vlan/subnet
As far as I've experienced, my setup where I'm using stateless mode, and
nodes with 2 nics on the same vlan, it seems impossible to PXE on one
nic and to have the other nic configured once the node provisionned :
- *whatever* bios order I PXE: eth0 will always get configured in the
end, eth2 will end up with a lease like :
host tars-113-noip0cc47a58c76a {
dynamic;
hardware ethernet 0c:c4:7a:58:c7:6a;
supersede server.allow-booting = 00;
}
I don't know why.
- noderes.installnic : I still don't know how it's supposed to be used
but its value doesn't seem to make sense when different from the nic
which did the PXE (eth0)
- nics.nips doesn't seem to help in my case either
Thanks again.
--
T. H.
_______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
