Thank you for pointing me to ` journalctl -u xcatd -f`, that shows me that xcat/xnba.kpxe is requested (and I assume provided to the booting node). However, after that, I see no more activity on the xcat master. I would expect activity recorded on the xcat master at the steps: xcat.genesis.doxcat: Getting initial certificate --> 172.30.18.6:3001 xcat.genesis.doxcat: Running getdestiny --> 172.30.18.6:3001
Both of those commands above seem to timeout with no apparent response from the xcat master. The ip address and port specified are correct for the xcat master. I have ensured that iptables is open for those ports. I have ensure that there is a process listening on port 3001. What else should I check? Can I get more debug info from the genesis kernel? Can I get more debug info from the xcat master? On Thu, May 23, 2019 at 4:51 AM Song BJ Yang <yang...@cn.ibm.com> wrote: > Hi, > > You can watch the output of `journalctl -u xcatd -f` in another session > during nodediscovery > > there are some similar issues reported before, see > https://sourceforge.net/p/xcat/mailman/search/?q=Unrecognized+directive+ , > you can simply go through them for any hint > > ------------------------------------------------------------------------------ > YANG Song (杨嵩) > IBM China System Technology Laboratory > Tel: 86-10-82452903 > Email: yang...@cn.ibm.com > Address: Building 28, ZhongGuanCun Software Park, > No.8, Dong Bei Wang West Road, Haidian District Beijing 100193, PRC > > 北京市海淀区东北旺西路8号中关村软件园28号楼 > 邮编: 100193 > > > > ----- Original message ----- > From: Andrew Loftus <alof...@illinois.edu> > To: xCAT Users Mailing list <xcat-user@lists.sourceforge.net> > Cc: > Subject: [EXTERNAL] [xcat-user] Unrecognized directive (dest=) during > nodediscovery > Date: Thu, May 23, 2019 6:58 AM > > Setting up a new test cluster and getting the following on the compute > node during nodediscovery: > > xcat.genesis.doxcat: Running getdestiny --> 172.30.18.6:3001 > > xcat.genesis.doxcat: Received destiny= > xcat.genesis.doxcat: The destiny=, destiny parameters= > xcat.genesis.doxcat: Unrecognized directive (dest=) > xcat.genesis.doxcat: ... Will retry xCAT in 40 seconds > xcat.genesis.doxcat: ... Will retry xCAT in 30 seconds > > There are no "discovery" type messages in /var/log/messages or in > /var/log/xcat/cluster.log. > > Where to look for more troubleshooting information? > > > Version info: > # lsxcatd -a > Version 2.14.6 (git commit 7c787c499ebca7a98d6fcdb3577f701ac16d7ab3, built > Fri Mar 29 03:19:08 EDT 2019) > This is a Management Node > dbengine=SQLite > _______________________________________________ > xCAT-user mailing list > xCAT-user@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/xcat-user > > > >
_______________________________________________ xCAT-user mailing list xCAT-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xcat-user
