Hi John, if all looks good & the dhcp server is running,
is it now receiving a dhcp reply? are you sure the node's adapter is on the correct vlan or switchport? ________________________________ From: John Roche <john.ro...@crick.ac.uk> Sent: 27 May 2020 10:55 To: xCAT Users Mailing list <xcat-user@lists.sourceforge.net> Subject: Re: [xcat-user] [External] PXE-E18: Server response timeout. Ran these commands and No errors came out from it Still having issues with the pxe boot :(( From: Javier Ron <j....@qmul.ac.uk> Sent: 26 May 2020 17:18 To: xCAT Users Mailing list <xcat-user@lists.sourceforge.net> Subject: Re: [xcat-user] [External] PXE-E18: Server response timeout. Hi john, if you have done makedhcp makedhcp <node name> The dhcp server should now respond to requests try rinstall <node name> osimage=centos7.6-x86_64-compute -u Kind Regards Javier Ron IT Research Officer Queen Mary University of London, CB204 Mile End Road London E1 4NS Mob: +44 (0) 777 613 8899 Email: j....@qmul.ac.uk<mailto:j....@qmul.ac.uk> [Image result for mental health first aider] I’m a Mental Health First Aider! ________________________________ From: John Roche <john.ro...@crick.ac.uk<mailto:john.ro...@crick.ac.uk>> Sent: 26 May 2020 16:56 To: xCAT Users Mailing list <xcat-user@lists.sourceforge.net<mailto:xcat-user@lists.sourceforge.net>> Subject: Re: [xcat-user] [External] PXE-E18: Server response timeout. Tried this No luck How did people set up the dhpc part for doing a pxe boot? John From: Jarrod Johnson <jjohns...@lenovo.com<mailto:jjohns...@lenovo.com>> Sent: 22 May 2020 17:25 To: xCAT-user@lists.sourceforge.net<mailto:xCAT-user@lists.sourceforge.net> Subject: Re: [xcat-user] [External] PXE-E18: Server response timeout. Hmm, nodeset <nodename> stat Rinstall thould have taken care of that, but checking... ________________________________ From: John Roche <john.ro...@crick.ac.uk<mailto:john.ro...@crick.ac.uk>> Sent: Friday, May 22, 2020 8:40 AM To: xCAT-user@lists.sourceforge.net<mailto:xCAT-user@lists.sourceforge.net> <xCAT-user@lists.sourceforge.net<mailto:xCAT-user@lists.sourceforge.net>> Subject: [External] [xcat-user] PXE-E18: Server response timeout. Hi, I recently build an xcat server Rpower works But doing an rinstall, it keeps failing at the PXE boot I’m doing rinstal <node name> -u It uses UEFI I’m starting to pull my hair now on what’s the issue Here is the error I see when I’m doing an rcons. Thanks Boot Failed - PXE Network: PciRoot(0x0)/Pci(0x2,0x0)/Pci(0x0,0x0)/Ctrl(0x1)/MAC(E41D2DDE7931,0x0)/IPv4(0.0.0.0,0x0,DHCP,0.0.0.0,0.0.0.0,0.0.0.0) >>Start PXE over IPv4. PXE-E18: Server response timeout. >>Start PXE over IPv4. PXE-E18: Server response timeout. Boot Failed - PXE Network: PciRoot(0x0)/Pci(0x2,0x0)/Pci(0x0,0x0)/Ctrl(0x2)/MAC(E41D2DDE7932,0x0)/IPv4(0.0.0.0,0x0,DHCP,0.0.0.0,0.0.0.0,0.0.0.0) >>Start PXE over IPv4. The Francis Crick Institute Limited is a registered charity in England and Wales no. 1140062 and a company registered in England and Wales no. 06885462, with its registered office at 1 Midland Road London NW1 1AT The Francis Crick Institute Limited is a registered charity in England and Wales no. 1140062 and a company registered in England and Wales no. 06885462, with its registered office at 1 Midland Road London NW1 1AT The Francis Crick Institute Limited is a registered charity in England and Wales no. 1140062 and a company registered in England and Wales no. 06885462, with its registered office at 1 Midland Road London NW1 1AT
_______________________________________________ xCAT-user mailing list xCAT-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xcat-user
