thanks. I briefly looked at it, and will be building a node soon to make sure it works as expected.
On Tue, Dec 15, 2020 at 5:12 AM Nathan A Besaw <bes...@us.ibm.com> wrote: > confignics has been deprecated, equivalent function is now available in > the confignetwork postscript. > > Changing your definition to: > postscripts=confignetwork -s,setupntp,hpc3-postscripts/hpc3postscript.1 > should replicate the old behavior. > > > [image: Inactive hide details for Imam Toufique ---12/15/2020 04:05:58 > AM---Hi, I ran into an issue setting static IP addresses, that I]Imam > Toufique ---12/15/2020 04:05:58 AM---Hi, I ran into an issue setting static > IP addresses, that I am not sure what > > From: Imam Toufique <techie...@gmail.com> > To: xCAT Users Mailing list <xcat-user@lists.sourceforge.net> > Date: 12/15/2020 04:05 AM > Subject: [EXTERNAL] [xcat-user] question on setting static IP in > /etc/sysconfig/network-script/ifcfg-* files > ------------------------------ > > > > Hi, > I ran into an issue setting static IP addresses, that I am not sure what > changed. > > I had 'confignics -s' in postscripts, to write-out an > /etc/sysconfig/network-scripts/ifcfg-<interfacename> file with static IP > address, for a node. > > I have this: > postscripts=confignics -s,setupntp,hpc3-postscripts/hpc3postscript.1 > > This was working all along. When nodes were being built, my > ifcfg-<interfacename> files were being written out as the one (example) > below: > > DEVICE=eno3 > IPADDR=10.240.58.14 > NETMASK=255.255.254.0 > BOOTPROTO=none > ONBOOT=yes > NAME=xcat-eno3 > MTU=1500 > > Recently(about 2 months ago or so), I upgraded to xcat 2.16 release. > > [root@hpc3-xcat-1 dhcpd]# lsxcatd -v > Version 2.16 (git commit 7fc773bd8e82ff9270bd7832558422dd17e23e66, built > Tue Jun 16 16:07:25 EDT 2020 > > Now, the ifcfg-<interfacename> files are no longer being setup like that. > Files are being written out like that. > > # Generated by parse-kickstart > DEVICE="eno5" > IPV6INIT="yes" > *BOOTPROTO="dhcp"* > UUID="2e7e3e1c-c2ad-4004-bedd-b8f975fae95c" > ONBOOT="yes" > > I haven't changed any postscript configuration, perhaps there was a change > needed related to this, which I am not sure of. > > network table look like this: > > [root@hpc3-xcat-1 ansible]# lsdef -t network compute_net_1 > Object name: compute_net_1 > domain=local > dynamicrange=10.240.58.221-10.240.58.240 > gateway=10.240.58.1 > mask=255.255.254.0 > mgtifname=eno1 > mtu=1500 > nameservers=10.240.58.4,8.8.8.8 > net=10.240.58.0 > staticrange=10.240.58.4-10.240.58.220 > tftpserver=<xcatmaster> > > Is 'confignics' no longer supported in the new version of xcat? What is > the process of writing/configuring an static IP address for nodes in xcat? > > Please give me a hand with this, as I would really like to avoid setting > network card settings with DHCP. > > thanks very much._______________________________________________ > xCAT-user mailing list > xCAT-user@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/xcat-user > > > > _______________________________________________ > xCAT-user mailing list > xCAT-user@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/xcat-user > -- Regards, *Imam Toufique* *213-700-5485*
_______________________________________________ xCAT-user mailing list xCAT-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xcat-user
