Hello Mark Gurevich

Yes, the log is accessible, I am running the “xcatprobe” as root…..and there is 
enough space.
The MN node is running Ubuntu 18.04, just an fyi.


~# ll /var/log/xcat/cluster.log*
-rw-r--r-- 1 root root 0 Mar 14 00:07 /var/log/xcat/cluster.log
-rw-r--r-- 1 root root 0 Mar 14 00:07 /var/log/xcat/cluster.log.1


:xcatprobe xcatmn -i em1
[mn]: Checking all xCAT daemons are running...                                  
                                  [ OK ]
[mn]: Checking xcatd can receive command request...                             
                                  [ OK ]
[mn]: Checking 'site' table is configured...                                    
                                  [ OK ]
[mn]: Checking provision network is configured...                               
                                  [ OK ]
[mn]: Checking 'passwd' table is configured...                                  
                                  [ OK ]
[mn]: Checking important directories(installdir,tftpdir) are configured...      
                                  [ OK ]
[mn]: Checking SELinux is disabled...                                           
                                  [ OK ]
[mn]: Checking HTTP service is configured...                                    
                                  [ OK ]
[mn]: Checking TFTP service is configured...                                    
                                  [ OK ]
[mn]: Checking DNS service is configured...                                     
                                  [ OK ]
[mn]: Checking DHCP service is configured...                                    
                                  [ OK ]
[mn]: Checking NTP service is configured...                                     
                                  [ OK ]
[mn]: Checking rsyslog service is configured...                                 
                                  [ OK ]
[mn]: Checking firewall is disabled...                                          
                                  [ OK ]
[mn]: Checking minimum disk space for xCAT ['/tmp' needs 1GB;'/install' needs 
10GB;'/var' needs 1GB]...           [ OK ]
[mn]: Checking Linux ulimits configuration...                                   
                                  [ OK ]
[mn]: Checking network kernel parameter configuration...                        
                                  [ OK ]
[mn]: Checking xCAT daemon attributes configuration...                          
                                  [ OK ]
[mn]: Checking xCAT log is stored in /var/log/xcat/cluster.log...               
                                  [WARN]
[mn]: Failed to store MN logs to /var/log/xcat/cluster.log
[mn]: Checking xCAT management node IP: <172.16.0.1> is configured to static... 
                                  [WARN]
[mn]: The value '172.16.0.1' of 'master' in 'site' table isn't a static ip
[mn]: Checking dhcpd.leases file is less than 100M...                           
                                  [ OK ]
=================================== SUMMARY ====================================
[MN]: Checking on MN...                                                         
                                  [ OK ]
    Checking xCAT log is stored in /var/log/xcat/cluster.log...                 
                                  [WARN]
        Failed to store MN logs to /var/log/xcat/cluster.log
    Checking xCAT management node IP: <172.16.0.1> is configured to static...   
                                  [WARN]
        The value '172.16.0.1' of 'master' in 'site' table isn't a static ip


Regards,
Huzefa Zakir
Systems Analyst
Direct 832.271.6965
eXcellence in IS Solutions, Inc. (X-ISS)<https://x-iss.com/>
Making HPC Work for You

From: Mark Gurevich <gurev...@us.ibm.com>
Sent: Monday, March 15, 2021 9:47 AM
To: xCAT Users Mailing list <xcat-user@lists.sourceforge.net>
Subject: Re: [xcat-user] cluster.log is not working


Check if the user running "xcatprobe" can access "/var/log/xcat/cluster.log" 
file and if there is enough disk space.

Mark Gurevich
Poughkeepsie Development Lab
HPC Software Development - xCAT

"If we knew what it was we were doing, it would not be called research, would 
it?"
--Albert Einstein



[Inactive hide details for Huzefa Zakir via xCAT-user ---03/15/2021 10:34:56 
AM---OS: Ububtu 18.04 xCAT Ver: 2.16.1]Huzefa Zakir via xCAT-user ---03/15/2021 
10:34:56 AM---OS: Ububtu 18.04 xCAT Ver: 2.16.1

From: Huzefa Zakir via xCAT-user 
<xcat-user@lists.sourceforge.net<mailto:xcat-user@lists.sourceforge.net>>
To: "xcat-user@lists.sourceforge.net<mailto:xcat-user@lists.sourceforge.net>" 
<xcat-user@lists.sourceforge.net<mailto:xcat-user@lists.sourceforge.net>>
Cc: Huzefa Zakir <hzu...@x-iss.com<mailto:hzu...@x-iss.com>>
Date: 03/15/2021 10:34 AM
Subject: [EXTERNAL] [xcat-user] cluster.log is not working

________________________________



OS: Ububtu 18.04
xCAT Ver: 2.16.1

When I ran “xcatprobe xcatmn" I get this WARNING, how do I fix this ?

Checking xCAT log is stored in /var/log/xcat/cluster.log... [WARN]
Failed to store MN logs to /var/log/xcat/cluster.log



Regards,
Huzefa
_______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net<mailto:xCAT-user@lists.sourceforge.net>
https://urldefense.proofpoint.com/v2/url?u=https-3A__lists.sourceforge.net_lists_listinfo_xcat-2Duser&d=DwICAg&c=jf_iaSHvJObTbx-siA1ZOg&r=cGs4a-jfx6Emudek2Wdi4FLq2XKm1pvrlbCQ-h7Qq7A&m=D8r85jA4OA9ief_qkKAKUoOkR5FMCYbnkquEd74PtKw&s=DHCdoTnehwpqccJLy5gGwgjCI0-4RT5g59BR5Kxkhzo&e=


_______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user

Reply via email to