Hi,

Need your helpful thoughts here with a problem we have, please.

We have nodes that were provisioned with xcat, they are running, OS is
working and installed.  The boot order is set to PXE first, SSD 2nd.

Several days ago, when I rebooted one of the nodes, it went straight to PXE
discovery mode - attempting for an install.  This is a node that is built,
it should have exited the PXE boot mode and boot off the disk, but it never
did.

I am not sure what's going on, it looks like xcat has lost the status of
the node, whether it is installed or not ( need provisioning?)

Here is the 'lsdef' output of the node:

```
[root@mn] lsdef -t node hpc3-14-03
Object name: hpc3-14-03
    arch=x86_64
    cpucount=40
    cputype=Intel(R) Xeon(R) Gold 6148 CPU @ 2.40GHz
    currchain=boot
    currstate=boot
    disksize=sda:224GB,sdb:224GB
    groups=centos78
    ip=10.240.58.16
    mac=08:f1:ea:e4:35:52
    memory=193122MB
    mtm=HPE:ProLiant XL170r Gen10
    netboot=xnba
    nichostnamesuffixes.ib0=-ib0
    nichostnamesuffixes.ipmi=-ipmi
    nicips.ib0=10.240.60.16
    nicips.ipmi=10.240.62.16
    os=centos7.7
    postbootscripts=otherpkgs,hpc3-postscripts/hpc3postbootscript

postscripts=syslog,remoteshell,syncfiles,setupntp,hpc3-postscripts/hpc3postscript.1,confignetwork
-s
    profile=compute
    provmethod=centos7.8-x86_64-install-compute
    serial=2M294204L9
    status=booted
    statustime=06-21-2021 16:41:45
    supportedarchs=x86,x86_64

```

```
[root@mn]# nodediscoverls |grep 14-03
  38363730-3535-324D-3239-343230344C39    hpc3-14-03          manual
  HPE:ProLiant XL170r Gen10 2M294204L9
```

```
[root@mn]# lsdef -t network compute_net_1

Object name: compute_net_1

    domain=local

    dynamicrange=10.240.58.221-10.240.58.240

    gateway=10.240.58.1

    mask=255.255.254.0
    mgtifname=eno1
    mtu=1500
    nameservers=10.240.58.4,8.8.8.8,128.200.192.202
    net=10.240.58.0
    staticrange=10.240.58.4-10.240.59.220
    tftpserver=<xcatmaster>
```

Any idea what might be going on here?  Why an already setup/installed node
is going back to discovery ( and wanting to be installed) mode?

Can someone please shed some light?

thanks a lot!
_______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user

Reply via email to