Hi Mark
I did what you said and the output is shown below:
xcatprobe xcatmn -i eno5
[mn]: Checking all xCAT daemons are running...
[ OK ]
[mn]: Checking xcatd can receive command request...
[ OK ]
[mn]: Checking 'site' table is configured...
[ OK ]
[mn]: Checking provision network is configured...
[ OK ]
[mn]: Checking 'passwd' table is configured...
[ OK ]
[mn]: Checking important directories(installdir,tftpdir) are configured...
[ OK ]
[mn]: Checking SELinux is disabled...
[ OK ]
[mn]: Checking HTTP service is configured...
[ OK ]
[mn]: Checking TFTP service is configured...
[ OK ]
[mn]: Checking DNS service is configured...
[ OK ]
[mn]: Checking DHCP service is configured...
[FAIL]
[mn]: Simulate a node xcatmntest<ip=10.50.1.7 mac=aa:aa:aa:aa:aa:aa> to do dhcp
test
[mn]: DHCP server reply is wrong
[mn]: Run 'makedhcp -n' if it has not been ran before.
[mn]: Checking NTP service is configured...
[ OK ]
[mn]: Checking rsyslog service is configured...
[ OK ]
[mn]: Checking firewall is disabled...
[ OK ]
[mn]: Checking minimum disk space for xCAT ['/tmp' needs 1GB;'/var' needs
1GB;'/install' needs 10GB]... [ OK ]
[mn]: Checking Linux ulimits configuration...
[ OK ]
[mn]: Checking network kernel parameter configuration...
[ OK ]
[mn]: Checking site table attribute... xcatmaxconnections=
[INFO]
[mn]: Checking site table attribute... xcatmaxbatchconnections=
[INFO]
[mn]: Checking xCAT daemon attributes configuration...
[ OK ]
[mn]: Checking xCAT log is stored in /var/log/xcat/cluster.log...
[ OK ]
[mn]: Checking xCAT management node IP: <10.50.1.7> is configured to static...
[ OK ]
[mn]: Checking dhcpd.leases file is less than 100M...
[ OK ]
[mn]: Checking DB packages installation...
[ OK ]
=================================== SUMMARY ====================================
[MN]: Checking on MN...
[FAIL]
Checking DHCP service is configured...
[FAIL]
Simulate a node xcatmntest<ip=10.50.1.7 mac=aa:aa:aa:aa:aa:aa> to do
dhcp test
DHCP server reply is wrong
Run 'makedhcp -n' if it has not been ran before.
Kind regards
Soporte
From: Mark Gurevich <gurev...@us.ibm.com>
Sent: viernes, 24 de septiembre de 2021 15:30
To: xCAT Users Mailing list <xcat-user@lists.sourceforge.net>
Subject: Re: [xcat-user] xcat dhcp issue
Ok, the "-V" flag did not do what I expected.
Edit file /opt/xcat/probe/subcmds/xcatmn and around line 19, flip "my $verbose
= 0;" from 0 to 1. Then rerun "xcatprobe xcatmn -i eno5" without the "-V"
flag.
Mark Gurevich
Poughkeepsie Development Lab
HPC Software Development - xCAT
"If we knew what it was we were doing, it would not be called research, would
it?"
--Albert Einstein
[Inactive hide details for "SOPORTE MODEMAT via xCAT-user" ---09/24/2021
04:24:48 PM---Hi Mark The xcat version that I have inst]"SOPORTE MODEMAT via
xCAT-user" ---09/24/2021 04:24:48 PM---Hi Mark The xcat version that I have
installed is 2.16.2.
From: "SOPORTE MODEMAT via xCAT-user"
<xcat-user@lists.sourceforge.net<mailto:xcat-user@lists.sourceforge.net>>
To: "xCAT Users Mailing list"
<xcat-user@lists.sourceforge.net<mailto:xcat-user@lists.sourceforge.net>>
Cc: "SOPORTE MODEMAT"
<soporte.mode...@epn.edu.ec<mailto:soporte.mode...@epn.edu.ec>>
Date: 09/24/2021 04:24 PM
Subject: [EXTERNAL] Re: [xcat-user] xcat dhcp issue
________________________________
Hi Mark
The xcat version that I have installed is 2.16.2.
Right now I just have a master node and two compute nodes for testing-
Kind regards.
Soporte
From: Mark Gurevich <gurev...@us.ibm.com<mailto:gurev...@us.ibm.com>>
Sent: viernes, 24 de septiembre de 2021 12:58
To: xCAT Users Mailing list
<xcat-user@lists.sourceforge.net<mailto:xcat-user@lists.sourceforge.net>>
Subject: Re: [xcat-user] xcat dhcp issue
SOPORTE,
Which version of xCAT ?
Are you running in hierarchical environment with server nodes ?
Mark Gurevich
Poughkeepsie Development Lab
HPC Software Development - xCAT
"If we knew what it was we were doing, it would not be called research, would
it?"
--Albert Einstein
[Inactive hide details for "SOPORTE MODEMAT via xCAT-user" ---09/23/2021
08:40:55 PM---Hi. Thank you for your reply. I run the c]"SOPORTE MODEMAT via
xCAT-user" ---09/23/2021 08:40:55 PM---Hi. Thank you for your reply. I run the
command below but I do not the reason why the error exists:
From: "SOPORTE MODEMAT via xCAT-user"
<xcat-user@lists.sourceforge.net<mailto:xcat-user@lists.sourceforge.net>>
To: "xCAT Users Mailing list"
<xcat-user@lists.sourceforge.net<mailto:xcat-user@lists.sourceforge.net>>
Cc: "SOPORTE MODEMAT"
<soporte.mode...@epn.edu.ec<mailto:soporte.mode...@epn.edu.ec>>
Date: 09/23/2021 08:40 PM
Subject: [EXTERNAL] [xcat-user] xcat dhcp issue
________________________________
Hi.
Thank you for your reply. I run the command below but I do not the reason why
the error exists:
xcatprobe -V xcatmn -i eno5 | more
=================================== SUMMARY ====================================
[MN]: Checking on MN...
[FAIL]
Checking DHCP service is configured...
[FAIL]
DHCP server reply is wrong
Run 'makedhcp -n' if it has not been ran before.
I have also tried:
/opt/xcat/probe//subcmds/detect_dhcpd -V -i eno5
[debug] :Send dhcp discover from: NIC = eno5, IP = 10.50.1.7, MAC =
b4:7a:f1:21:ef:d0
[debug] :Current operating system is rh
[debug] :The duration of capturing DHCP package is 10 second(s)
[info] :Start to detect DHCP, please wait 10 seconds
[debug] :The id of process which is used to capture the packet by tcpdump is
612199
[debug] :Kill process 612199 used to capture the packet by 'tcpdump'
[debug] :Dump all the information captured during last 10 seconds
[debug] :The server found: mac = , clientip = , serverip = , offer = 0
[debug] :The server found: mac = b4:7a:f1:21:ef:d0, clientip = , serverip = ,
offer = 0
[debug] :The server found: mac = b4:7a:f1:21:ef:d0, clientip = , serverip = ,
offer = 0
[debug] :The server found: mac = b4:7a:f1:21:ef:d0, clientip = , serverip = ,
offer = 0
[debug] :The server found: mac = b4:7a:f1:21:ef:d0, clientip = , serverip = ,
offer = 0
[info] :++++++++++++++++++++++++++++++++++
[info] :There are 0 servers replied to dhcp discover.
[info] :++++++++++++++++++++++++++++++++++
systemctl status dhcpd
● dhcpd.service - DHCPv4 Server Daemon
Loaded: loaded (/usr/lib/systemd/system/dhcpd.service; enabled; vendor
preset: disabled)
Active: active (running) since Thu 2021-09-23 12:52:31 -05; 14min ago
Docs: man:dhcpd(8)
man:dhcpd.conf(5)
Main PID: 609816 (dhcpd)
Status: "Dispatching packets..."
Tasks: 1 (limit: 1646703)
Memory: 8.1M
CGroup: /system.slice/dhcpd.service
└─609816 /usr/sbin/dhcpd -f -cf /etc/dhcp/dhcpd.conf -user dhcpd
-group dhcpd --no-pid eno5 ib0
Sep 23 13:01:24 quindemaster01 dhcpd[609816]: DHCPDISCOVER from
b4:7a:f1:21:ef:d0 via eno5: network eno5: no free leases
Sep 23 13:01:26 quindemaster01 dhcpd[609816]: DHCPDISCOVER from
b4:7a:f1:21:ef:d0 via eno5: network eno5: no free leases
Sep 23 13:01:28 quindemaster01 dhcpd[609816]: DHCPDISCOVER from
b4:7a:f1:21:ef:d0 via eno5: network eno5: no free leases
Sep 23 13:01:30 quindemaster01 dhcpd[609816]: DHCPDISCOVER from
b4:7a:f1:21:ef:d0 via eno5: network eno5: no free leases
Sep 23 13:02:10 quindemaster01 dhcpd[609816]: DHCPDISCOVER from
b4:7a:f1:21:ef:d0 via eno5: network eno5: no free leases
Sep 23 13:02:12 quindemaster01 dhcpd[609816]: DHCPDISCOVER from
b4:7a:f1:21:ef:d0 via eno5: network eno5: no free leases
Sep 23 13:02:14 quindemaster01 dhcpd[609816]: DHCPDISCOVER from
b4:7a:f1:21:ef:d0 via eno5: network eno5: no free leases
Sep 23 13:02:16 quindemaster01 dhcpd[609816]: DHCPDISCOVER from
b4:7a:f1:21:ef:d0 via eno5: network eno5: no free leases
Sep 23 13:02:18 quindemaster01 dhcpd[609816]: DHCPDISCOVER from
b4:7a:f1:21:ef:d0 via eno5: network eno5: no free leases
Sep 23 13:02:20 quindemaster01 dhcpd[609816]: DHCPDISCOVER from
b4:7a:f1:21:ef:d0 via eno5: network eno5: no free leases
How can I fix that?
Soporte
From: Mark Gurevich <gurev...@us.ibm.com<mailto:gurev...@us.ibm.com>>
Sent: jueves, 23 de septiembre de 2021 8:01
To: xCAT Users Mailing list
<xcat-user@lists.sourceforge.net<mailto:xcat-user@lists.sourceforge.net>>
Subject: Re: [xcat-user] xCAT 2.16.2 new xNBA issue
SOPORTE,
Is this problem related to "xCAT 2.16.2 new xNBA issue" thread.
If not, can you start a new thread ?
Try to rerun the xcatprobe with verbose flag:
xcatprobe -V xcatmn -i eno5
Mark Gurevich
Poughkeepsie Development Lab
HPC Software Development - xCAT
"If we knew what it was we were doing, it would not be called research, would
it?"
--Albert Einstein
[Inactive hide details for "SOPORTE MODEMAT via xCAT-user" ---09/22/2021
07:41:14 PM---Hello guys. I would like you to help me d]"SOPORTE MODEMAT via
xCAT-user" ---09/22/2021 07:41:14 PM---Hello guys. I would like you to help me
debug the error that I get every time when I run the command
From: "SOPORTE MODEMAT via xCAT-user"
<xcat-user@lists.sourceforge.net<mailto:xcat-user@lists.sourceforge.net>>
To: "xCAT Users Mailing list"
<xcat-user@lists.sourceforge.net<mailto:xcat-user@lists.sourceforge.net>>
Cc: "SOPORTE MODEMAT"
<soporte.mode...@epn.edu.ec<mailto:soporte.mode...@epn.edu.ec>>
Date: 09/22/2021 07:41 PM
Subject: [EXTERNAL] Re: [xcat-user] xCAT 2.16.2 new xNBA issue
________________________________
Hello guys.
I would like you to help me debug the error that I get every time when I run
the command that is shown below. The error is related to the dhcp service:
xcatprobe xcatmn -i eno5
xcatprobe xcatmn -i eno5
[mn]: Checking all xCAT daemons are running...
[ OK ]
[mn]: Checking xcatd can receive command request...
[ OK ]
[mn]: Checking 'site' table is configured...
[ OK ]
[mn]: Checking provision network is configured...
[ OK ]
[mn]: Checking 'passwd' table is configured...
[ OK ]
[mn]: Checking important directories(installdir,tftpdir) are configured...
[ OK ]
[mn]: Checking SELinux is disabled...
[ OK ]
[mn]: Checking HTTP service is configured...
[ OK ]
[mn]: Checking TFTP service is configured...
[ OK ]
[mn]: Checking DNS service is configured...
[ OK ]
[mn]: Checking DHCP service is configured...
[FAIL]
[mn]: DHCP server reply is wrong
[mn]: Run 'makedhcp -n' if it has not been ran before.
[mn]: Checking NTP service is configured...
[ OK ]
[mn]: Checking rsyslog service is configured...
[ OK ]
[mn]: Checking firewall is disabled...
[ OK ]
[mn]: Checking minimum disk space for xCAT ['/install' needs 10GB;'/var' needs
1GB;'/tmp' needs 1GB]... [ OK ]
[mn]: Checking Linux ulimits configuration...
[ OK ]
[mn]: Checking network kernel parameter configuration...
[ OK ]
[mn]: Checking xCAT daemon attributes configuration...
[ OK ]
[mn]: Checking xCAT log is stored in /var/log/xcat/cluster.log...
[ OK ]
[mn]: Checking xCAT management node IP: <10.50.1.7> is configured to static...
[ OK ]
[mn]: Checking dhcpd.leases file is less than 100M...
[ OK ]
[mn]: Checking DB packages installation...
[ OK ]
=================================== SUMMARY ====================================
[MN]: Checking on MN...
[FAIL]
Checking DHCP service is configured...
[FAIL]
DHCP server reply is wrong
Run 'makedhcp -n' if it has not been ran before.
I have also run the command 'makedhcp -n' but the error still persists.
The dhcp configuration is shown below in the attached file
[attachment "dhcp.conf" deleted by Mark Gurevich/Poughkeepsie/IBM]
_______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net<mailto:xCAT-user@lists.sourceforge.net>
https://lists.sourceforge.net/lists/listinfo/xcat-user
_______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net<mailto:xCAT-user@lists.sourceforge.net>
https://lists.sourceforge.net/lists/listinfo/xcat-user
_______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net<mailto:xCAT-user@lists.sourceforge.net>
https://lists.sourceforge.net/lists/listinfo/xcat-user
_______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
