Hello Everyone, I'm looking for some hints about the most suitable way to change the default hostname on compute node.
I'm currently using the 2.16.3 version of xCAT on top of rhel 7.9 On my lab I have the following conf regarding the network topic: * Management network (not routed) - used for compute registration and installation * Public network (routed ) - network services (DNS, NTP , ...) and public access On compute nodes we have the following Nics , let say : eno1 => management net (installnic) and eno2 => Public net During the node registration the node name (binded to the @IP of eno1) will be the default hostname, in my case node1-adm. But what I want to do is to replace the default hostname (normally on the management net) by using the @IP of the second NIC (eno2) on the public net I would like to have something like that : node1.mydomain.lab.fr as the hostname I'm thinking to run a postscript file at the end of the node installation by calling the relevant command (hostnamectl or modifying the /etc/hostname file). The question is: * During the node registration, do we have a way to setup the hostname as mentioned above, I mean that I would like to have the hostname binded to the NIC on the public network? Thanks in advance for any hints or direction I should take in order to achieve this setup. Best regards Michel Semedo Technical Consultant Open Source Linux/HPC HPE Pointnext Services michel.sem...@hpe.com<mailto:michel.sem...@hpe.com> +33 6 7299 3848 Office +33 6 7299 3848 Mobile Puteaux hpe.com/pointnext [cid:image001.png@01D80963.7C8E9140]
_______________________________________________ xCAT-user mailing list xCAT-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xcat-user
