xCAT should be able to pull SNMP invo from a Cisco switch just like it would
any other switch. You'll want to make sure you have SNMP configured properly in
the switches table. It also might be necessary to get the switchport name
correct. Sometimes, you can just use, for example "1," but I've seen cases
where you need to spell out the port as the switch knows it. Like:
"Ethernet1/1." You should be able to use the following snmpwalk command (with
the right SNMP version settings) to see how the switch names the ports. The
following works with snmpv1.
snmpwalk -v 1 -c {COMMUNITY} {SWITCH_NAME} .1.3.6.1.2.1.31.1.1.1.1
Regards,
Christian Caruthers
Lenovo Professional Services
Mobile: 757-289-9872
From: Hannum, Keith <keith.han...@lmco.com>
Sent: Tuesday, April 12, 2022 11:39
To: xcat-user@lists.sourceforge.net
Subject: [External] [xcat-user] xCAT getmacs from Cisco via SNMP?
Does xcat getmacs have a built-in way to get macs for a node from a cisco
switch via snmp? Or via any other method from a cisco switch?
_______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
