xCAT uses raw ipmi commands to do ipmi communication. You can turn xCAT debug on with "chdef -t site clustersite xcatdebugmode=1" and then issue a command, like "rpower <node> stat" to see all the raw ipmi commands xCAT is sending.
Use "chdef -t site clustersite xcatdebugmode=0" to turn debug off. -----Original Message----- From: Michael Green <mishagr...@gmail.com> Sent: Thursday, February 23, 2023 1:08 PM To: xCAT Users Mailing list <xcat-user@lists.sourceforge.net> Subject: [EXTERNAL] [xcat-user] ipmitool -I open vs lanplus vs lan Hello collective wisdom, What IPMI interface does xcat use? Is it lan or lanplus or open? (As in ipmitool -I ) Is it configurable? I have a bunch of new Dell servers in the lab that don't seem to communicate over lan or lanplus interface, only open and I have trouble provisioning them through xcat. I suspect it's because of lanplus not supported/missing from these servers. -- Regards, Michael _______________________________________________ xCAT-user mailing list xCAT-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xcat-user _______________________________________________ xCAT-user mailing list xCAT-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xcat-user
