Strange. This is what I see from cmd=barrier_out to the end of
execution:
<-pmi- 0: cmd=barrier_out rc=0
<-pmi- 1: cmd=barrier_out rc=0
-pmi-> 1: cmd=get kvsname=kvs_0 key=P0-businesscard
<-pmi- 1: cmd=get_result rc=0
value=port#58977$description#m10$ifname#192.168.1.110$
-pmi-> 0: cmd=get kvsname=kvs_0 key=P1-businesscard
<-pmi- 0: cmd=get_result rc=0
value=port#53028$description#m10$ifname#192.168.1.110$
-pmi-> 1: cmd=finalize
<-pmi- 1: cmd=finalize_ack rc=0
-pmi-> 0: cmd=finalize
<-pmi- 0: cmd=finalize_ack rc=0
Hello world from process 1 of 2
Hello world from process 0 of 2
On Nov 5, 2008, at 12:17 PM, Daniel Gruner wrote:
Ok, some progress. I am now able to run things like:
[EMAIL PROTECTED] examples]# xmvapich n0000,n0001 ./cpi
Process 0 of 2 is on n0000
pi is approximately 3.1415926544231318, Error is 0.0000000008333387
wall clock time = 0.000757
Process 1 of 2 is on n0001
as long as the two nodes specified are different. If, however, I want
to run two processes on the same node, e.g.:
[EMAIL PROTECTED] examples]# xmvapich n0000,n0000 ./cpi
Process 1 of 2 is on n0000
Process 0 of 2 is on n0000
It hangs as before. Here is the debugging trace:
[EMAIL PROTECTED] examples]# xmvapich -D n0000,n0000 ./cpi
-pmi-> 0: cmd=initack pmiid=1
<-pmi- 0: cmd=initack rc=0
<-pmi- 0: cmd=set rc=0 size=2
<-pmi- 0: cmd=set rc=0 rank=0
<-pmi- 0: cmd=set rc=0 debug=0
-pmi-> 1: cmd=initack pmiid=1
<-pmi- 1: cmd=initack rc=0
<-pmi- 1: cmd=set rc=0 size=2
<-pmi- 1: cmd=set rc=0 rank=1
<-pmi- 1: cmd=set rc=0 debug=0
-pmi-> 0: cmd=init pmi_version=1 pmi_subversion=1
<-pmi- 0: cmd=response_to_init rc=0
-pmi-> 0: cmd=get_maxes
<-pmi- 0: cmd=maxes rc=0 kvsname_max=64 keylen_max=64 vallen_max=64
-pmi-> 1: cmd=init pmi_version=1 pmi_subversion=1
<-pmi- 1: cmd=response_to_init rc=0
-pmi-> 1: cmd=get_maxes
<-pmi- 1: cmd=maxes rc=0 kvsname_max=64 keylen_max=64 vallen_max=64
-pmi-> 0: cmd=get_appnum
<-pmi- 0: cmd=appnum rc=0 appnum=0
-pmi-> 0: cmd=get_my_kvsname
<-pmi- 0: cmd=my_kvsname rc=0 kvsname=kvs_0
-pmi-> 1: cmd=get_appnum
<-pmi- 1: cmd=appnum rc=0 appnum=0
-pmi-> 1: cmd=get_my_kvsname
<-pmi- 1: cmd=my_kvsname rc=0 kvsname=kvs_0
-pmi-> 0: cmd=get_my_kvsname
<-pmi- 0: cmd=my_kvsname rc=0 kvsname=kvs_0
-pmi-> 1: cmd=get_my_kvsname
<-pmi- 1: cmd=my_kvsname rc=0 kvsname=kvs_0
-pmi-> 0: cmd=put kvsname=kvs_0 key=P0-businesscard
value=port#45956$description#n0000$ifname#10.10.0.10$
<-pmi- 0: cmd=put_result rc=0
-pmi-> 1: cmd=put kvsname=kvs_0 key=P1-businesscard
value=port#38363$description#n0000$ifname#10.10.0.10$
<-pmi- 1: cmd=put_result rc=0
-pmi-> 0: cmd=barrier_in
-pmi-> 1: cmd=barrier_in
<-pmi- 0: cmd=barrier_out rc=0
<-pmi- 1: cmd=barrier_out rc=0
-pmi-> 0: cmd=get kvsname=kvs_0 key=P1-businesscard
<-pmi- 0: cmd=get_result rc=0
value=port#38363$description#n0000$ifname#10.10.0.10$
Process 1 of 2 is on n0000
Process 0 of 2 is on n0000
[EMAIL PROTECTED] examples]#
On 11/5/08, Daniel Gruner <[EMAIL PROTECTED]> wrote:
That is what I was going for... It returns (none).
I am about to run the test after explicitly setting up the hostnames
of the nodes.
Does xmvapich probe the nodes for their names? How does it resolve
their addresses?
Daniel
On 11/5/08, Latchesar Ionkov <[EMAIL PROTECTED]> wrote:
I guess that is the problem. What do you see if you do:
xrx n0000 hostname
Thanks,
Lucho
On Nov 5, 2008, at 12:02 PM, Daniel Gruner wrote:
Hi Lucho,
I am provisioning with perceus, and in order to get static node
addresses I have entries in /etc/hosts that define them, e.g.:
10.10.0.10 n0000
10.10.0.11 n0001
10.10.0.12 n0002
My /etc/nsswitch.conf is set to resolv hosts like:
hosts: files dns
One thing I have noticed is that the nodes do not have their own
hostname defined after provisioning. Could this be the problem?
Thanks,
Daniel
On 11/5/08, Latchesar Ionkov <[EMAIL PROTECTED]> wrote:
Hi,
It looks like the MPI processes on the nodes don't send a
correct IP
address to connect to. In your case, they send:
-pmi-> 0: cmd=put kvsname=kvs_0 key=P0-businesscard
value=port#38675$description#(none)$
And when I run it, I see:
-pmi-> 0: cmd=put kvsname=kvs_0 key=P0-businesscard
value=port#34283$description#m10$ifname#192.168.1.110$
I tried to figure out how does mpich pick the IP address, and it
looks
like
it uses the hostname on the node for that. Do you have the node
names
setup
correctly?
Thanks,
Lucho
On Nov 4, 2008, at 1:31 PM, Daniel Gruner wrote:
Hi Lucho,
Did you have a chance to look at this? Needless to say it has
been
quite frustrating, and perhaps it has to do with the particular
Linux
distribution you run. I am running on a RHEL5.2 system with
kernel
2.6.26, and the compilation of mpich2 or mvapich2 is totally
vanilla.
My network is just GigE. xmvapich works for a single process,
but it
always hangs for more than one, regardless of whether they are
on the
same node or separate nodes, and independently of the example
program
(hellow, cpi, etc). Other than some administration issues
(like the
authentication stuff I have been exchanging with Abhishek
about), this
is the only real obstacle to making my clusters suitable for
production...
Thanks,
Daniel
---------- Forwarded message ----------
From: Daniel Gruner <[EMAIL PROTECTED]>
Date: Oct 8, 2008 2:49 PM
Subject: Re: [xcpu] Re: (s)xcpu and MPI
To: [email protected]
Hi Lucho,
Here is the output (two nodes in the cluster):
[EMAIL PROTECTED] examples]# xmvapich -D -a ./hellow
-pmi-> 0: cmd=initack pmiid=1
<-pmi- 0: cmd=initack rc=0
<-pmi- 0: cmd=set rc=0 size=2
<-pmi- 0: cmd=set rc=0 rank=0
<-pmi- 0: cmd=set rc=0 debug=0
-pmi-> 0: cmd=init pmi_version=1 pmi_subversion=1
<-pmi- 0: cmd=response_to_init rc=0
-pmi-> 0: cmd=get_maxes
<-pmi- 0: cmd=maxes rc=0 kvsname_max=64 keylen_max=64
vallen_max=64
-pmi-> 0: cmd=get_appnum
<-pmi- 0: cmd=appnum rc=0 appnum=0
-pmi-> 1: cmd=initack pmiid=1
<-pmi- 1: cmd=initack rc=0
<-pmi- 1: cmd=set rc=0 size=2
<-pmi- 1: cmd=set rc=0 rank=1
<-pmi- 1: cmd=set rc=0 debug=0
-pmi-> 0: cmd=get_my_kvsname
<-pmi- 0: cmd=my_kvsname rc=0 kvsname=kvs_0
-pmi-> 0: cmd=get_my_kvsname
<-pmi- 0: cmd=my_kvsname rc=0 kvsname=kvs_0
-pmi-> 1: cmd=init pmi_version=1 pmi_subversion=1
<-pmi- 1: cmd=response_to_init rc=0
-pmi-> 1: cmd=get_maxes
<-pmi- 1: cmd=maxes rc=0 kvsname_max=64 keylen_max=64
vallen_max=64
-pmi-> 1: cmd=get_appnum
<-pmi- 1: cmd=appnum rc=0 appnum=0
-pmi-> 0: cmd=put kvsname=kvs_0 key=P0-businesscard
value=port#38675$description#(none)$
<-pmi- 0: cmd=put_result rc=0
-pmi-> 1: cmd=get_my_kvsname
<-pmi- 1: cmd=my_kvsname rc=0 kvsname=kvs_0
-pmi-> 0: cmd=barrier_in
-pmi-> 1: cmd=get_my_kvsname
<-pmi- 1: cmd=my_kvsname rc=0 kvsname=kvs_0
-pmi-> 1: cmd=put kvsname=kvs_0 key=P1-businesscard
value=port#38697$description#(none)$
<-pmi- 1: cmd=put_result rc=0
-pmi-> 1: cmd=barrier_in
<-pmi- 0: cmd=barrier_out rc=0
<-pmi- 1: cmd=barrier_out rc=0
-pmi-> 0: cmd=get kvsname=kvs_0 key=P1-businesscard
<-pmi- 0: cmd=get_result rc=0
value=port#38697$description#(none)$
-pmi-> 1: cmd=get kvsname=kvs_0 key=P0-businesscard
<-pmi- 1: cmd=get_result rc=0
value=port#38675$description#(none)$
Hello world from process 1 of 2
Hello world from process 0 of 2
It looks like it ran, but then it hangs and never returns.
If I try to run another example (cpi), here is the output from
the run
with a single process, and then with two:
[EMAIL PROTECTED] examples]# xmvapich n0001 ./cpi
Process 0 of 1 is on (none)
pi is approximately 3.1415926544231341, Error is
0.0000000008333410
wall clock time = 0.000313
[EMAIL PROTECTED] examples]# xmvapich -D n0001 ./cpi
-pmi-> 0: cmd=initack pmiid=1
<-pmi- 0: cmd=initack rc=0
<-pmi- 0: cmd=set rc=0 size=1
<-pmi- 0: cmd=set rc=0 rank=0
<-pmi- 0: cmd=set rc=0 debug=0
-pmi-> 0: cmd=init pmi_version=1 pmi_subversion=1
<-pmi- 0: cmd=response_to_init rc=0
-pmi-> 0: cmd=get_maxes
<-pmi- 0: cmd=maxes rc=0 kvsname_max=64 keylen_max=64
vallen_max=64
-pmi-> 0: cmd=get_appnum
<-pmi- 0: cmd=appnum rc=0 appnum=0
-pmi-> 0: cmd=get_my_kvsname
<-pmi- 0: cmd=my_kvsname rc=0 kvsname=kvs_0
-pmi-> 0: cmd=get_my_kvsname
<-pmi- 0: cmd=my_kvsname rc=0 kvsname=kvs_0
-pmi-> 0: cmd=put kvsname=kvs_0 key=P0-businesscard
value=port#48513$description#(none)$
<-pmi- 0: cmd=put_result rc=0
-pmi-> 0: cmd=barrier_in
<-pmi- 0: cmd=barrier_out rc=0
-pmi-> 0: cmd=finalize
<-pmi- 0: cmd=finalize_ack rc=0
Process 0 of 1 is on (none)
pi is approximately 3.1415926544231341, Error is
0.0000000008333410
wall clock time = 0.000332
[EMAIL PROTECTED] examples]
normal termination.
[EMAIL PROTECTED] examples]# xmvapich -D n0000,n0001 ./cpi
-pmi-> 0: cmd=initack pmiid=1
<-pmi- 0: cmd=initack rc=0
<-pmi- 0: cmd=set rc=0 size=2
<-pmi- 0: cmd=set rc=0 rank=0
<-pmi- 0: cmd=set rc=0 debug=0
-pmi-> 0: cmd=init pmi_version=1 pmi_subversion=1
<-pmi- 0: cmd=response_to_init rc=0
-pmi-> 0: cmd=get_maxes
<-pmi- 0: cmd=maxes rc=0 kvsname_max=64 keylen_max=64
vallen_max=64
-pmi-> 0: cmd=get_appnum
<-pmi- 0: cmd=appnum rc=0 appnum=0
-pmi-> 0: cmd=get_my_kvsname
<-pmi- 0: cmd=my_kvsname rc=0 kvsname=kvs_0
-pmi-> 1: cmd=initack pmiid=1
<-pmi- 1: cmd=initack rc=0
<-pmi- 1: cmd=set rc=0 size=2
<-pmi- 1: cmd=set rc=0 rank=1
<-pmi- 1: cmd=set rc=0 debug=0
-pmi-> 0: cmd=get_my_kvsname
<-pmi- 0: cmd=my_kvsname rc=0 kvsname=kvs_0
-pmi-> 1: cmd=init pmi_version=1 pmi_subversion=1
<-pmi- 1: cmd=response_to_init rc=0
-pmi-> 1: cmd=get_maxes
<-pmi- 1: cmd=maxes rc=0 kvsname_max=64 keylen_max=64
vallen_max=64
-pmi-> 0: cmd=put kvsname=kvs_0 key=P0-businesscard
value=port#45645$description#(none)$
<-pmi- 0: cmd=put_result rc=0
-pmi-> 1: cmd=get_appnum
<-pmi- 1: cmd=appnum rc=0 appnum=0
-pmi-> 0: cmd=barrier_in
-pmi-> 1: cmd=get_my_kvsname
<-pmi- 1: cmd=my_kvsname rc=0 kvsname=kvs_0
-pmi-> 1: cmd=get_my_kvsname
<-pmi- 1: cmd=my_kvsname rc=0 kvsname=kvs_0
-pmi-> 1: cmd=put kvsname=kvs_0 key=P1-businesscard
value=port#53467$description#(none)$
<-pmi- 1: cmd=put_result rc=0
-pmi-> 1: cmd=barrier_in
<-pmi- 0: cmd=barrier_out rc=0
<-pmi- 1: cmd=barrier_out rc=0
-pmi-> 0: cmd=get kvsname=kvs_0 key=P1-businesscard
<-pmi- 0: cmd=get_result rc=0
value=port#53467$description#(none)$
Process 0 of 2 is on (none)
Process 1 of 2 is on (none)
hung processes....
Daniel
On Wed, Oct 8, 2008 at 3:23 PM, Latchesar Ionkov <[EMAIL PROTECTED]
>
wrote:
I can't replicate it, it is working fine here :(
Can you please try xmvapich again with -D option and cut&paste
the
output?
Thanks,
Lucho
On Oct 6, 2008, at 2:51 PM, Daniel Gruner wrote:
I just compiled mpich2-1.1.0a1, and tested it, with the same
result as
with mvapich. Again I had to do the configure with
--with-device=ch3:sock, since otherwise the runtime complains
that
it
can't allocate shared memory or some such thing. When I run a
single
process using xmvapich it completes fine. However when running
two or
more it hangs. This is not surprising as it should be the
same as
mvapich when running over regular TCP/IP on GigE rather than a
special
interconnect.
[EMAIL PROTECTED] examples]# ./hellow
Hello world from process 0 of 1
[EMAIL PROTECTED] examples]# xmvapich -a ./hellow
Hello world from process 1 of 2
Hello world from process 0 of 2
^C
[EMAIL PROTECTED] examples]# xmvapich n0000 ./hellow
Hello world from process 0 of 1
[EMAIL PROTECTED] examples]# xmvapich n0001 ./hellow
Hello world from process 0 of 1
[EMAIL PROTECTED] examples]# xmvapich n0000,n0001 ./hellow
Hello world from process 1 of 2
Hello world from process 0 of 2
^C
Daniel
On 10/6/08, Latchesar Ionkov <[EMAIL PROTECTED]> wrote:
I just compiled mpich2-1.1.0a1 and tried running hellow,
everything
looks
fine:
$ xmvapich m1,m2
~/work/mpich2-1.1.0a1/build/examples/hellow
Hello world from process 0 of 2
Hello world from process 1 of 2
$
I didn't set any special parameters when compiling, just
./configure.
Thanks,
Lucho
On Oct 3, 2008, at 9:05 AM, Daniel Gruner wrote:
Well, I just did the same, but with NO success... The
processes
are
apparently started, run at the beginning, but then they hang
and
do
not finalize. For example, running the "hellow" example from
the
mvapich2 distribution:
[EMAIL PROTECTED] examples]# cat hellow.c
/* -*- Mode: C; c-basic-offset:4 ; -*- */
/*
* (C) 2001 by Argonne National Laboratory.
* See COPYRIGHT in top-level directory.
*/
#include <stdio.h>
#include "mpi.h"
int main( int argc, char *argv[] )
{
int rank;
int size;
MPI_Init( 0, 0 );
MPI_Comm_rank(MPI_COMM_WORLD, &rank);
MPI_Comm_size(MPI_COMM_WORLD, &size);
printf( "Hello world from process %d of %d\n", rank, size );
MPI_Finalize();
return 0;
}
[EMAIL PROTECTED] examples]# make hellow
../bin/mpicc -I../src/include -I../src/include -c hellow.c
../bin/mpicc -o hellow hellow.o
[EMAIL PROTECTED] examples]# ./hellow
Hello world from process 0 of 1
(this was fine, just running on the master). Running on the
two
nodes
requires that the xmvapich process be killed (ctrl-C):
[EMAIL PROTECTED] examples]# xmvapich -ap ./hellow
n0000: Hello world from process 0 of 2
n0001: Hello world from process 1 of 2
[EMAIL PROTECTED] examples]#
I have tried other codes, both in C and Fortran, with the
same
behaviour. I don't know if the issue is with xmvapich or
with
mvapich2. Communication is just GigE.
Daniel
On 9/30/08, Abhishek Kulkarni <[EMAIL PROTECTED]> wrote:
Just gave this a quick try, and xmvapich seems to run MPI
apps
compiled
with mpich2 without any issues.
$ xmvapich -a ./mpihello
blender: Hello World from process 0 of 1
eregion: Hello World from process 0 of 1
Hope that helps,
-- Abhishek
On Tue, 2008-09-30 at 17:02 +0200, Stefan Boresch wrote:
Thanks for the quick reply!
On Tue, Sep 30, 2008 at 07:34:37AM -0700, ron minnich
wrote:
On Tue, Sep 30, 2008 at 1:57 AM, stefan
<[EMAIL PROTECTED]>
wrote:
the state of xcpu support with MPI libraries -- either
of
the
common
free ones
is fine (e.g., openmpi, mpich2)
there is now support for mpich2. openmpi is not
supported as
openmpi
is (once again) in flux. it has been supported numerous
times and
has
changed out from under us numerous times. I no longer
use
openmpi if
I
have a working mvapich or mpich available.
I am slightly confused. I guess I had inferred the openmpi
issues from
the various mailing lists. But I just looked at the latest
mpich2
prerelease and found no mentioning of (s)xcpu(2). I
thought
that some
patches/support on the side of the mpi library are
necessary
(as,
e.g.,
openmpi provides for bproc ...) Or am I completely
misunderstanding
something here, and this is somehow handled by xcpu itself
...
I guess there is some difference between
xrx 192.168.19.2 /bin/date
and
xrx 192.168.19.2 <pathto>/mpiexec ...
and the latter seems too magic to me to run out of the box
(it
sure
would be nice though ...)
Sorry for making myself a nuisance -- thanks,
Stefan Boresch
