I figured I'll share what I did to mount my Dell Streak and connect with my 302
via bluetooth, so others don't have to repeat the research.
Thanks to Max for the tips.
Parts:
Outerbox impact cover
(optional) http://www.amazon.com/OtterBox-Dell-Streak-Impact-Case/dp/B004MG3OTW ($10)
Slipgrip Mount (few options to choose from) -
http://www.slipgripcarmounts.com/Using-Impact-Case_c_21746.html ($40)
K6BT - http://www.cumulus-soaring.com/k6.htm ($175)
DB9 Male to RJ45 Modular Adapter -
http://www.amazon.com/gp/product/B0016RO20U($4)
Extra Dell Streak cable - http://www.amazon.com/gp/product/B005AL36SW ($9 incl
shipping)
2 x Network Cable - http://www.amazon.com/gp/product/B000V0ET92 ($2 each)
Instructions:
1 - Insert the RJ45 pins into the DB9 modular adapter according to the
following:
Red to pin2
Black to pin3
blue to pin5
brown to pin6
white to pin8
(the rest can go anywhere)
2 - Connect a netwrok cable between the K6Bt and the above DB9 adapter. This
will provide power and communication to the K6Bt.
3 - Velcro the K6Bt to the 302, and follow the instructions that came with the
K6Bt to pair with the Streak, then select the K6Bt device in XCSoar and the CAI
302 driver.
4 - The above should be sufficient for up to 5 hours flight. If you need longer
than that, follow the instructions below to connect the 5v to charge the
Streak.
5 - Cut the Streak Cable and the other network cable.
6 - Carefully solder pin 1 from network cable (White/orange) to the Streak
cable black wire (GND) , and pin 8 from the network cable (brown) to the Streak
red wire (+5).
7 - Connect this cable between the other K6Bt connector and the Streak to
charge the Streak in flight.
Hope this helps,
Ramy
>________________________________
> From: Max Kellermann <m...@duempel.org>
>To: Ramy Yanetz <ryan...@yahoo.com>
>Cc: "xcsoar-user@lists.sourceforge.net" <xcsoar-user@lists.sourceforge.net>
>Sent: Thursday, November 3, 2011 4:12 PM
>Subject: Re: [Xcsoar-user] Dell Streak and K6Bt
>
>On 2011/11/04 00:04, Ramy Yanetz <ryan...@yahoo.com> wrote:
>> Hopefully without having to build my own cable, but this is also an
>> option.
>
>Congratulations, you've bought the best hardware that is currently
>available for soaring! (CAI302 + Streak)
>
>The pins both the CAI302 and the K6-Bt are well-documented, building
>custom cables is easy enough. Get a network RJ45 cable, cut one end
>off, and solder it to a DB9 connector.
>
>> Also, after reading the manual, playing with XCSoar in simulator mode, as
>> well as flying with it, I have few more questions and comments regarding
>> some basic functionality which seems to be missing or not working as
>> expected. What is the best way to address those questions? Should I just
>> open a ticket for each bug/enhancement?
>
>If something is missing or bugged, write a ticket.
>
>If you have a question, write here.
>
>Max
>
>
>
------------------------------------------------------------------------------
Cloud Services Checklist: Pricing and Packaging Optimization
This white paper is intended to serve as a reference, checklist and point of
discussion for anyone considering optimizing the pricing and packaging model
of a cloud services business. Read Now!
http://www.accelacomm.com/jaw/sfnl/114/51491232/
_______________________________________________
Xcsoar-user mailing list
Xcsoar-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcsoar-user
