Hello LP, Pure SIM mode does not behave like in real flying as you do not lose altitude with each glide.
Good: You could replay an igc files in XCSoar as it behaves correctly. - place an igc file in XCSoarData - logs - select Config - Replay - select file and press replay Better: Connect your device to SeeYou and replay an igc file. Best: Get Condor and practice the use of XCSoar in the safety of your lounge chair... Hope this helps Erich On Sunday, 8 March 2020 at 1:05:05 am UTC+11 LP wrote: > New XCS use rhere. Been testing it out in sim mode and flying with condor. > With a simple racing task setup the final glide bar does not seem to be > showing me arrival difference around the whole task (from start, to > waypoint1, and then to home). After takeoff i look at it and it says below > final glide, as i get close to waypoint1 it shows say +200', once i leave > waypoint1 it then shows say +3000'. It seems like its only showing me > altitude difference to the next waypoint. I thought it was suppose to show > the altitude i would arrive at the goal (where i took off from in this > case) after flying through all the turnpoints? I simply want to know if i > have final glide through all the turnpoints but can't seem to find an > infobox or anything that tells me that. Am i just blind or too much of a > newbie? >
_______________________________________________ Xcsoar-user mailing list Xcsoar-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xcsoar-user
