Still running stable? Am 09.01.2013 10:27, schrieb Mario Giammarco: > > Yes the system is now on 24/24. > > Il giorno 09/gen/2013 10:25, "Bastian Mäuser" <mephi...@mephis.to > <mailto:mephi...@mephis.to>> ha scritto: > > please let me know if USB boot runs stable for you.. > > Am 08.01.2013 21 <tel:08.01.2013%2021>:41, schrieb Mario Giammarco: >> >> >> >> 2013/1/8 Bastian Mäuser <mephi...@mephis.to >> <mailto:mephi...@mephis.to>> >> >> Please read correctly.. >> >> From #5 you have the instruction on how to modify your initrd >> on the Host to make it bootable from anythings USB like.. >> >> >> Sorry my android device shown me only first page. >> >> eg: >> >> Do THIS b4 the first boot on a second console: >> >> mkdir /tmp/sda >> mount -t ext3 /dev/sda1 /tmp/sda >> >> >> To thank you I suggest here to do avoid copy and do: >> >> mount -t sysfs /sys /tmp/sda/sys >> >> Then chroot /tmp/sda and continue from original >> >> >> >> >> chmod -R 664 /sys/block >> cp -R /sys/block /tmp/sda/sys/ >> # Ignore I/O errors >> chroot /tmp/sda >> cd /boot >> mv initrd-2.6.18-128.1.6.el5.xs5.5.0.505.1024xen.img >> initrd-2.6.18-128.1.6.el5.xs5.5.0.505.1024xen.img.old >> mkinitrd --with-usb >> initrd-2.6.18-128.1.6.el5.xs5.5.0.505.1024xen.img >> 2.6.18-128.1.6.el5.xs5.5.0.505.1024xen >> >> replace the version numers with your's.. >> >> Am 08.01.2013 11 <tel:08.01.2013%2011>:26, schrieb Mario >> Giammarco: >>> >>> Ok thanks for the reply but the link in the wiki is wrong: >>> it sends me to a page that helps people with keys less than 16GB >>> >>> Il giorno 08/gen/2013 10:56, "Bastian Mäuser" >>> <mephi...@mephis.to <mailto:mephi...@mephis.to>> ha scritto: >>> >>> Hi there, >>> >>> the Probleme is not the rootdelay, but the USB Support >>> which is missing >>> in the initrd.. >>> >>> Follow this instructions to fix it: >>> >>> >>> http://wiki.xen.org/wiki/XCP_FAQ_General#Can_I_install_XCP_to_a_USB_drive_.2F_SD_Card >>> >>> but be warned: for sdcard and usbkey did not run stable. >>> >>> greetings, >>> Bastian >>> >>> Am 08.01.2013 10 <tel:08.01.2013%2010>:21, schrieb Mario >>> Giammarco: >>> > Hello, >>> > I am trying xcp on a HP Microserver N40L. >>> > I have installed it on USB key. >>> > I am not able to boot it because it does not find root. >>> > In old kernels like 2.6 used in xcp is quite common >>> this problem and >>> > I can fix it with rootdelay=60. >>> > But xcp use a "extlinux" bootloader and I cannot try >>> the option. >>> > I have found and modified a extlinux.conf file but >>> without luck. >>> > How can I pass rootdelay option to the kernel at boot? >>> > >>> > Thanks, >>> > Mario >>> > >>> > >>> > _______________________________________________ >>> > Xen-api mailing list >>> > Xen-api@lists.xen.org <mailto:Xen-api@lists.xen.org> >>> > http://lists.xen.org/cgi-bin/mailman/listinfo/xen-api >>> > >>> >> >> >
_______________________________________________ Xen-api mailing list Xen-api@lists.xen.org http://lists.xen.org/cgi-bin/mailman/listinfo/xen-api
