I have attached the output from 'xl dmesg' with iommu=debug apic_verbosity=debug loglvl=all
This is with 4.6.0, with the recent patch enabling mwait-idle on Skylake applied. My initial post was running the latest out of xen.git master. I may be able to try to newer code again later this week. Eric On Wed, Dec 2, 2015 at 5:45 AM, Jan Beulich <jbeul...@suse.com> wrote: > >>> On 02.12.15 at 03:51, <eshel...@pobox.com> wrote: > > ASRock Z170 Extreme 4 with BIOS version 2.30 was motherboard #1 > > Gigabyte GA-Z170XP-SLI with BIOS version F5 was motherboard #2 > > > > As I initially reported, both were reporting the error involving f0:1f.0 > > > > Not surprisingly, there are no f0:xx.y devices. The closest I suppose > is: > > 00:1f.0 ISA Bridge: Intel Corporation Sunrise Point-H LPC Controller (rev > > 31) > > Did you also check "iommu=verbose" output for occurrences of this > ID (e.g. representing an IO-APIC or HPET)? > > Jan > >
Xen 4.6.0-9.fc20 (XEN) Xen version 4.6.0 (user@) (gcc (GCC) 4.8.3 20140911 (Red Hat 4.8.3-7)) debug=n Mon Nov 30 22:31:58 UTC 2015 (XEN) Latest ChangeSet: (XEN) Bootloader: GRUB 2.00 (XEN) Command line: placeholder iommu=debug apic_verbosity=debug loglvl=all console=none dom0_mem=min:1024M dom0_mem=max:4096M (XEN) Video information: (XEN) VGA is text mode 80x25, font 8x16 (XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds (XEN) Disc information: (XEN) Found 1 MBR signatures (XEN) Found 1 EDD information structures (XEN) Xen-e820 RAM map: (XEN) 0000000000000000 - 000000000009c800 (usable) (XEN) 000000000009c800 - 00000000000a0000 (reserved) (XEN) 00000000000e0000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 0000000069c3a000 (usable) (XEN) 0000000069c3a000 - 0000000069c3b000 (ACPI NVS) (XEN) 0000000069c3b000 - 0000000069c65000 (reserved) (XEN) 0000000069c65000 - 0000000069cb8000 (usable) (XEN) 0000000069cb8000 - 000000006a3bd000 (reserved) (XEN) 000000006a3bd000 - 0000000076b99000 (usable) (XEN) 0000000076b99000 - 00000000777b0000 (reserved) (XEN) 00000000777b0000 - 0000000077f9a000 (ACPI NVS) (XEN) 0000000077f9a000 - 0000000077fff000 (ACPI data) (XEN) 0000000077fff000 - 0000000078000000 (usable) (XEN) 0000000078000000 - 0000000078100000 (reserved) (XEN) 00000000e0000000 - 00000000f0000000 (reserved) (XEN) 00000000fe000000 - 00000000fe011000 (reserved) (XEN) 00000000fec00000 - 00000000fec01000 (reserved) (XEN) 00000000fee00000 - 00000000fee01000 (reserved) (XEN) 00000000ff000000 - 0000000100000000 (reserved) (XEN) 0000000100000000 - 0000000876000000 (usable) (XEN) ACPI: RSDP 000F05B0, 0024 (r2 ALASKA) (XEN) ACPI: XSDT 77A1F098, 00B4 (r1 ALASKA A M I 1072009 AMI 10013) (XEN) ACPI: FACP 77A41B30, 010C (r5 ALASKA A M I 1072009 AMI 10013) (XEN) ACPI: DSDT 77A1F1E8, 22943 (r2 ALASKA A M I 1072009 INTL 20120913) (XEN) ACPI: FACS 77F99F80, 0040 (XEN) ACPI: APIC 77A41C40, 0084 (r3 ALASKA A M I 1072009 AMI 10013) (XEN) ACPI: FPDT 77A41CC8, 0044 (r1 ALASKA A M I 1072009 AMI 10013) (XEN) ACPI: FIDT 77A41D10, 009C (r1 ALASKA A M I 1072009 AMI 10013) (XEN) ACPI: MCFG 77A41DB0, 003C (r1 ALASKA A M I 1072009 MSFT 97) (XEN) ACPI: HPET 77A41DF0, 0038 (r1 ALASKA A M I 1072009 AMI. 5000B) (XEN) ACPI: SSDT 77A41E28, 036D (r1 SataRe SataTabl 1000 INTL 20120913) (XEN) ACPI: LPIT 77A42198, 0094 (r1 INTEL SKL 0 MSFT 5F) (XEN) ACPI: SSDT 77A42230, 002B (r2 INTEL UsbCTabl 1000 INTL 20120913) (XEN) ACPI: DBGP 77A42260, 0034 (r1 INTEL 0 MSFT 5F) (XEN) ACPI: DBG2 77A42298, 0054 (r0 INTEL 0 MSFT 5F) (XEN) ACPI: SSDT 77A422F0, 0618 (r2 INTEL xh_rvp08 0 INTL 20120913) (XEN) ACPI: AAFT 77A42908, 051A (r1 ALASKA OEMAAFT 1072009 MSFT 97) (XEN) ACPI: SSDT 77A42E28, 5212 (r2 SaSsdt SaSsdt 3000 INTL 20120913) (XEN) ACPI: UEFI 77A48040, 0042 (r1 0 0) (XEN) ACPI: SSDT 77A48088, 0E58 (r2 CpuRef CpuSsdt 3000 INTL 20120913) (XEN) ACPI: DMAR 77A48EE0, 00A8 (r1 INTEL SKL 1 INTL 1) (XEN) ACPI: ASF! 77A48F88, 00A5 (r32 INTEL HCG 1 TFSM F4240) (XEN) System RAM: 32452MB (33230872kB) (XEN) No NUMA configuration found (XEN) Faking a node at 0000000000000000-0000000876000000 (XEN) Domain heap initialised (XEN) found SMP MP-table at 000fc6a0 (XEN) DMI 2.8 present. (XEN) APIC boot state is 'xapic' (XEN) Using APIC driver default (XEN) ACPI: PM-Timer IO Port: 0x1808 (XEN) ACPI: v5 SLEEP INFO: control[1:1804], status[1:1800] (XEN) ACPI: Invalid sleep control/status register data: 0:0x8:0x3 0:0x8:0x3 (XEN) ACPI: SLEEP INFO: pm1x_cnt[1:1804,1:0], pm1x_evt[1:1800,1:0] (XEN) ACPI: 32/64X FACS address mismatch in FADT - 77f99f80/0000000000000000, using 32 (XEN) ACPI: wakeup_vec[77f99f8c], vec_size[20] (XEN) ACPI: Local APIC address 0xfee00000 (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) (XEN) Processor #0 7:14 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) (XEN) Processor #2 7:14 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) (XEN) Processor #4 7:14 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) (XEN) Processor #6 7:14 APIC version 21 (XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) (XEN) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) (XEN) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) (XEN) ACPI: IRQ0 used by override. (XEN) ACPI: IRQ2 used by override. (XEN) ACPI: IRQ9 used by override. (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs (XEN) ACPI: HPET id: 0x8086a701 base: 0xfed00000 (XEN) ERST table was not found (XEN) Using ACPI (MADT) for SMP configuration information (XEN) SMP: Allowing 4 CPUs (0 hotplug CPUs) (XEN) mapped APIC to ffff82cfffdfb000 (fee00000) (XEN) mapped IOAPIC to ffff82cfffdfa000 (fec00000) (XEN) IRQ limits: 120 GSI, 840 MSI/MSI-X (XEN) Failed to enable Interrupt Remapping: Will not enable x2APIC. (XEN) xstate_init: using cntxt_size: 0x440 and states: 0x1f (XEN) Intel machine check reporting enabled (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Detected 3514.746 MHz processor. (XEN) Initing memory sharing. (XEN) alt table ffff82d0802b8b50 -> ffff82d0802b9ef4 (XEN) spurious 8259A interrupt: IRQ7. (XEN) PCI: MCFG configuration 0: base e0000000 segment 0000 buses 00 - ff (XEN) PCI: MCFG area at e0000000 reserved in E820 (XEN) PCI: Using MCFG for segment 0000 bus 00-ff (XEN) Intel VT-d iommu 0 supported page sizes: 4kB, 2MB, 1GB. (XEN) Intel VT-d iommu 1 supported page sizes: 4kB, 2MB, 1GB. (XEN) Intel VT-d Snoop Control not enabled. (XEN) Intel VT-d Dom0 DMA Passthrough not enabled. (XEN) Intel VT-d Queued Invalidation enabled. (XEN) Intel VT-d Interrupt Remapping enabled. (XEN) Intel VT-d Shared EPT tables enabled. (XEN) I/O virtualisation enabled (XEN) - Dom0 mode: Relaxed (XEN) Interrupt remapping enabled (XEN) Getting VERSION: 1060015 (XEN) Getting VERSION: 1060015 (XEN) Enabled directed EOI with ioapic_ack_old on! (XEN) Getting ID: 0 (XEN) Getting LVT0: 700 (XEN) Getting LVT1: 400 (XEN) Suppress EOI broadcast on CPU#0 (XEN) enabled ExtINT on CPU#0 (XEN) ESR value before enabling vector: 0x40 after: 0 (XEN) ENABLING IO-APIC IRQs (XEN) -> Using old ACK method (XEN) init IO_APIC IRQs (XEN) IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23, 2-24, 2-25, 2-26, 2-27, 2-28, 2-29, 2-30, 2-31, 2-32, 2-33, 2-34, 2-35, 2-36, 2-37, 2-38, 2-39, 2-40, 2-41, 2-42, 2-43, 2-44, 2-45, 2-46, 2-47, 2-48, 2-49, 2-50, 2-51, 2-52, 2-53, 2-54, 2-55, 2-56, 2-57, 2-58, 2-59, 2-60, 2-61, 2-62, 2-63, 2-64, 2-65, 2-66, 2-67, 2-68, 2-69, 2-70, 2-71, 2-72, 2-73, 2-74, 2-75, 2-76, 2-77, 2-78, 2-79, 2-80, 2-81, 2-82, 2-83, 2-84, 2-85, 2-86, 2-87, 2-88, 2-89, 2-90, 2-91, 2-92, 2-93, 2-94, 2-95, 2-96, 2-97, 2-98, 2-99, 2-100, 2-101, 2-102, 2-103, 2-104, 2-105, 2-106, 2-107, 2-108, 2-109, 2-110, 2-111, 2-112, 2-113, 2-114, 2-115, 2-116, 2-117, 2-118, 2-119 not connected. (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=0 pin2=0 (XEN) number of MP IRQ sources: 15. (XEN) number of IO-APIC #2 registers: 120. (XEN) testing the IO APIC....................... (XEN) IO APIC #2...... (XEN) .... register #00: 02000000 (XEN) ....... : physical APIC id: 02 (XEN) ....... : Delivery Type: 0 (XEN) ....... : LTS : 0 (XEN) .... register #01: 00770020 (XEN) ....... : max redirection entries: 0077 (XEN) ....... : PRQ implemented: 0 (XEN) ....... : IO APIC version: 0020 (XEN) .... register #02: 00000000 (XEN) ....... : arbitration: 00 (XEN) .... IRQ redirection table: (XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: (XEN) 00 000 00 1 0 0 0 0 0 7 00 (XEN) 01 001 01 0 0 0 0 0 1 1 38 (XEN) 02 001 01 0 0 0 0 0 1 1 F0 (XEN) 03 001 01 0 0 0 0 0 1 1 40 (XEN) 04 001 01 0 0 0 0 0 1 1 48 (XEN) 05 001 01 0 0 0 0 0 1 1 50 (XEN) 06 001 01 0 0 0 0 0 1 1 58 (XEN) 07 001 01 0 0 0 0 0 1 1 60 (XEN) 08 001 01 0 0 0 0 0 1 1 68 (XEN) 09 001 01 1 1 0 0 0 1 1 70 (XEN) 0a 001 01 0 0 0 0 0 1 1 78 (XEN) 0b 001 01 0 0 0 0 0 1 1 88 (XEN) 0c 001 01 0 0 0 0 0 1 1 90 (XEN) 0d 001 01 0 0 0 0 0 1 1 98 (XEN) 0e 001 01 0 0 0 0 0 1 1 A0 (XEN) 0f 001 01 0 0 0 0 0 1 1 A8 (XEN) 10 000 00 1 0 0 0 0 0 0 00 (XEN) 11 000 00 1 0 0 0 0 0 0 00 (XEN) 12 000 00 1 0 0 0 0 0 0 00 (XEN) 13 000 00 1 0 0 0 0 0 0 00 (XEN) 14 000 00 1 0 0 0 0 0 0 00 (XEN) 15 000 00 1 0 0 0 0 0 0 00 (XEN) 16 000 00 1 0 0 0 0 0 0 00 (XEN) 17 000 00 1 0 0 0 0 0 0 00 (XEN) 18 094 04 1 0 0 0 0 1 2 86 (XEN) 19 010 00 1 0 0 0 0 1 2 85 (XEN) 1a 059 09 1 0 0 0 0 0 2 08 (XEN) 1b 00A 0A 1 0 0 0 0 0 2 22 (XEN) 1c 003 03 1 0 0 0 0 1 2 20 (XEN) 1d 000 00 1 0 0 0 0 0 0 00 (XEN) 1e 000 00 1 0 0 0 0 0 0 00 (XEN) 1f 000 00 1 0 0 0 0 0 0 00 (XEN) 20 081 01 1 0 0 0 0 1 2 0C (XEN) 21 000 00 1 0 0 0 0 0 0 00 (XEN) 22 000 00 1 0 0 0 0 0 0 00 (XEN) 23 000 00 1 0 0 0 0 0 0 00 (XEN) 24 000 00 1 0 0 0 0 0 0 00 (XEN) 25 000 00 1 0 0 0 0 0 0 00 (XEN) 26 000 00 1 0 0 0 0 0 0 00 (XEN) 27 000 00 1 0 0 0 0 0 0 00 (XEN) 28 000 00 1 0 0 0 0 0 0 00 (XEN) 29 000 00 1 0 0 0 0 0 0 00 (XEN) 2a 000 00 1 0 0 0 0 0 0 00 (XEN) 2b 000 00 1 0 0 0 0 0 0 00 (XEN) 2c 041 01 1 0 0 0 0 0 2 44 (XEN) 2d 000 00 1 0 0 0 0 0 0 00 (XEN) 2e 003 03 1 0 0 0 0 0 2 A0 (XEN) 2f 000 00 1 0 0 0 0 0 0 00 (XEN) 30 000 00 1 0 0 0 0 0 0 00 (XEN) 31 000 00 1 0 0 0 0 0 0 00 (XEN) 32 000 00 1 0 0 0 0 0 0 00 (XEN) 33 000 00 1 0 0 0 0 0 0 00 (XEN) 34 08D 0D 1 0 0 0 0 0 2 18 (XEN) 35 000 00 1 0 0 0 0 0 0 00 (XEN) 36 000 00 1 0 0 0 0 0 0 00 (XEN) 37 000 00 1 0 0 0 0 0 0 00 (XEN) 38 000 00 1 0 0 0 0 0 0 00 (XEN) 39 000 00 1 0 0 0 0 0 0 00 (XEN) 3a 080 00 1 0 0 0 0 0 2 08 (XEN) 3b 010 00 1 0 0 0 0 0 2 10 (XEN) 3c 000 00 1 0 0 0 0 0 0 00 (XEN) 3d 040 00 1 0 0 0 0 0 2 C0 (XEN) 3e 000 00 1 0 0 0 0 0 0 00 (XEN) 3f 020 00 1 0 0 0 0 0 2 0C (XEN) 40 000 00 1 0 0 0 0 0 0 00 (XEN) 41 098 08 1 0 0 0 0 1 2 02 (XEN) 42 004 04 1 0 0 0 0 0 2 08 (XEN) 43 000 00 1 0 0 0 0 0 0 00 (XEN) 44 000 00 1 0 0 0 0 0 0 00 (XEN) 45 000 00 1 0 0 0 0 0 0 00 (XEN) 46 000 00 1 0 0 0 0 0 0 00 (XEN) 47 000 00 1 0 0 0 0 0 0 00 (XEN) 48 000 00 1 0 0 0 0 0 0 00 (XEN) 49 000 00 1 0 0 0 0 0 0 00 (XEN) 4a 000 00 1 0 0 0 0 0 0 00 (XEN) 4b 000 00 1 0 0 0 0 0 0 00 (XEN) 4c 000 00 1 0 0 0 0 0 0 00 (XEN) 4d 000 00 1 0 0 0 0 0 0 00 (XEN) 4e 001 01 1 0 0 0 0 1 2 80 (XEN) 4f 0D0 00 1 0 0 0 0 0 2 10 (XEN) 50 000 00 1 0 0 0 0 0 0 00 (XEN) 51 000 00 1 0 0 0 0 0 0 00 (XEN) 52 000 00 1 0 0 0 0 0 0 00 (XEN) 53 001 01 1 0 0 0 0 1 2 05 (XEN) 54 000 00 1 0 0 0 0 0 0 00 (XEN) 55 000 00 1 0 0 0 0 0 0 00 (XEN) 56 000 00 1 0 0 0 0 0 0 00 (XEN) 57 000 00 1 0 0 0 0 0 0 00 (XEN) 58 000 00 1 0 0 0 0 0 0 00 (XEN) 59 000 00 1 0 0 0 0 0 0 00 (XEN) 5a 080 00 1 0 0 0 0 0 2 A4 (XEN) 5b 000 00 1 0 0 0 0 0 0 00 (XEN) 5c 000 00 1 0 0 0 0 0 0 00 (XEN) 5d 000 00 1 0 0 0 0 0 0 00 (XEN) 5e 000 00 1 0 0 0 0 0 0 00 (XEN) 5f 000 00 1 0 0 0 0 0 0 00 (XEN) 60 000 00 1 0 0 0 0 0 0 00 (XEN) 61 023 03 1 0 0 0 0 0 2 07 (XEN) 62 000 00 1 0 0 0 0 0 0 00 (XEN) 63 000 00 1 0 0 0 0 0 0 00 (XEN) 64 000 00 1 0 0 0 0 1 2 40 (XEN) 65 000 00 1 0 0 0 0 0 0 00 (XEN) 66 018 08 1 0 0 0 0 0 2 20 (XEN) 67 000 00 1 0 0 0 0 0 0 00 (XEN) 68 000 00 1 0 0 0 0 0 0 00 (XEN) 69 000 00 1 0 0 0 0 0 0 00 (XEN) 6a 000 00 1 0 0 0 0 0 0 00 (XEN) 6b 000 00 1 0 0 0 0 0 0 00 (XEN) 6c 000 00 1 0 0 0 0 0 0 00 (XEN) 6d 000 00 1 0 0 0 0 0 0 00 (XEN) 6e 000 00 1 0 0 0 0 0 0 00 (XEN) 6f 000 00 1 0 0 0 0 0 0 00 (XEN) 70 000 00 1 0 0 0 0 0 0 00 (XEN) 71 000 00 1 0 0 0 0 0 0 00 (XEN) 72 000 00 1 0 0 0 0 0 0 00 (XEN) 73 000 00 1 0 0 0 0 0 0 00 (XEN) 74 000 00 1 0 0 0 0 0 0 00 (XEN) 75 000 00 1 0 0 0 0 0 0 00 (XEN) 76 000 00 1 0 0 0 0 0 0 00 (XEN) 77 000 00 1 0 0 0 0 0 0 00 (XEN) Using vector-based indexing (XEN) IRQ to pin mappings: (XEN) IRQ240 -> 0:2 (XEN) IRQ56 -> 0:1 (XEN) IRQ64 -> 0:3 (XEN) IRQ72 -> 0:4 (XEN) IRQ80 -> 0:5 (XEN) IRQ88 -> 0:6 (XEN) IRQ96 -> 0:7 (XEN) IRQ104 -> 0:8 (XEN) IRQ112 -> 0:9 (XEN) IRQ120 -> 0:10 (XEN) IRQ136 -> 0:11 (XEN) IRQ144 -> 0:12 (XEN) IRQ152 -> 0:13 (XEN) IRQ160 -> 0:14 (XEN) IRQ168 -> 0:15 (XEN) .................................... done. (XEN) Using local APIC timer interrupts. (XEN) calibrating APIC timer ... (XEN) ..... CPU clock speed is 3503.5526 MHz. (XEN) ..... host bus clock speed is 23.9969 MHz. (XEN) ..... bus_scale = 0x1892 (XEN) TSC deadline timer enabled (XEN) Platform timer is 23.999MHz HPET (XEN) Allocated console ring of 32 KiB. (XEN) mwait-idle: MWAIT substates: 0x142120 (XEN) mwait-idle: v0.4 model 0x5e (XEN) mwait-idle: lapic_timer_reliable_states 0xffffffff (XEN) VMX: Supported advanced features: (XEN) - APIC MMIO access virtualisation (XEN) - APIC TPR shadow (XEN) - Extended Page Tables (EPT) (XEN) - Virtual-Processor Identifiers (VPID) (XEN) - Virtual NMI (XEN) - MSR direct-access bitmap (XEN) - Unrestricted Guest (XEN) - VMCS shadowing (XEN) - VM Functions (XEN) - Virtualisation Exceptions (XEN) HVM: ASIDs enabled. (XEN) HVM: VMX enabled (XEN) HVM: Hardware Assisted Paging (HAP) detected (XEN) HVM: HAP page sizes: 4kB, 2MB, 1GB (XEN) Suppress EOI broadcast on CPU#1 (XEN) masked ExtINT on CPU#1 (XEN) Suppress EOI broadcast on CPU#2 (XEN) masked ExtINT on CPU#2 (XEN) Suppress EOI broadcast on CPU#3 (XEN) masked ExtINT on CPU#3 (XEN) Brought up 4 CPUs (XEN) ACPI sleep modes: S3 (XEN) VPMU: disabled (XEN) mcheck_poll: Machine check polling timer started. (XEN) Dom0 has maximum 696 PIRQs (XEN) NX (Execute Disable) protection active (XEN) *** LOADING DOMAIN 0 *** (XEN) Xen kernel: 64-bit, lsb, compat32 (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x204a000 (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Dom0 alloc.: 0000000854000000->0000000858000000 (1021426 pages to be allocated) (XEN) Init. ramdisk: 00000008735f2000->0000000875fffe00 (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: ffffffff81000000->ffffffff8204a000 (XEN) Init. ramdisk: 0000000000000000->0000000000000000 (XEN) Phys-Mach map: ffffffff8204a000->ffffffff8284a000 (XEN) Start info: ffffffff8284a000->ffffffff8284a4b4 (XEN) Page tables: ffffffff8284b000->ffffffff82864000 (XEN) Boot stack: ffffffff82864000->ffffffff82865000 (XEN) TOTAL: ffffffff80000000->ffffffff82c00000 (XEN) ENTRY ADDRESS: ffffffff81d4d1f0 (XEN) Dom0 has maximum 4 VCPUs (XEN) Bogus DMIBAR 0xfed18001 on 0000:00:00.0 (XEN) Scrubbing Free RAM on 1 nodes using 4 CPUs (XEN) ....................................................................done. (XEN) Initial low memory virq threshold set at 0x4000 pages. (XEN) Std. Loglevel: All (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings) (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen) (XEN) Freed 304kB init memory. (XEN) IOAPIC[0]: Set PCI routing entry (2-9 -> 0x70 -> IRQ 9 Mode:1 Active:0) (XEN) Bogus DMIBAR 0xfed18001 on 0000:00:00.0 (XEN) PCI add device 0000:00:00.0 (XEN) PCI add device 0000:00:02.0 (XEN) PCI add device 0000:00:14.0 (XEN) PCI add device 0000:00:14.2 (XEN) PCI add device 0000:00:16.0 (XEN) PCI add device 0000:00:17.0 (XEN) PCI add device 0000:00:1b.0 (XEN) PCI add device 0000:00:1c.0 (XEN) PCI add device 0000:00:1c.2 (XEN) PCI add device 0000:00:1d.0 (XEN) PCI add device 0000:00:1d.7 (XEN) PCI add device 0000:00:1f.0 (XEN) PCI add device 0000:00:1f.2 (XEN) PCI add device 0000:00:1f.3 (XEN) PCI add device 0000:00:1f.4 (XEN) PCI add device 0000:00:1f.6 (XEN) PCI add device 0000:03:00.0 (XEN) PCI add device 0000:05:00.0 (XEN) IOAPIC[0]: Set PCI routing entry (2-13 -> 0x98 -> IRQ 13 Mode:0 Active:0) (XEN) IOAPIC[0]: Set PCI routing entry (2-1 -> 0x38 -> IRQ 1 Mode:0 Active:0) (XEN) IOAPIC[0]: Set PCI routing entry (2-4 -> 0x48 -> IRQ 4 Mode:0 Active:0) (XEN) IOAPIC[0]: Set PCI routing entry (2-8 -> 0x68 -> IRQ 8 Mode:0 Active:0) (XEN) IOAPIC[0]: Set PCI routing entry (2-14 -> 0xa0 -> IRQ 14 Mode:1 Active:1) (XEN) IOAPIC[0]: Set PCI routing entry (2-16 -> 0xb0 -> IRQ 16 Mode:1 Active:1) (XEN) IOAPIC[0]: Set PCI routing entry (2-18 -> 0xb8 -> IRQ 18 Mode:1 Active:1) (XEN) IOAPIC[0]: Set PCI routing entry (2-19 -> 0x21 -> IRQ 19 Mode:1 Active:1)
_______________________________________________ Xen-devel mailing list Xen-devel@lists.xen.org http://lists.xen.org/xen-devel
