You should compile kernel first. Please follow the "Getting Started"
page on 96boards
On 8/10/2016 7:07 AM, Kamenee Arumugam wrote:
Hi Chen,
I have tried to flash UEFI in my board with latest one but still facing
the same issue. Regarding to use dtb file from kernel source, I couldnt
find hi6220-hikey.dtb in my source kernel. i am downloading my kernel
source from
here: https://github.com/96boards/linux/tree/android-hikey-linaro-4.1
I only could find hi6220-hikey.dts file in the kernel source. Therefore
download from other github but which is correct one that i need to use?
In case, I am using incorrect kernel source, pls point to me to correct
one if you aware of?
Thanks,
Kamenee
On Thu, Aug 4, 2016 at 11:06 PM, Chenxiao Zhao <chenxiao.z...@gmail.com
<mailto:chenxiao.z...@gmail.com>> wrote:
The xen.cfg file seems fine to me. I suggest you try to use the dtb
file compiled from the kernel source and update UEFI bootloader on
hikey board to the latest version.
hope this could help.
On 8/4/2016 11:02 PM, Kamenee Arumugam wrote:
I have already pass hi6220-key.dtb in my xen.cfg:
options=console=dtuart dom0_mem=512M dom0_max_vcpus=4 conswitch=x
dtuart=/smb/uart@f7113000
kernel=Image console=hvc0 root=/dev/mmcblk1p4 rootwait rw
dtb=hi6220-hikey.dtb
I download the hi6220-hikey.dtb from this site:
https://android.googlesource.com/device/linaro/hikey-kernel/+/f117fa12746b59aa0a1a4d6335145e58935c422b/hi6220-hikey.dtb
<https://android.googlesource.com/device/linaro/hikey-kernel/+/f117fa12746b59aa0a1a4d6335145e58935c422b/hi6220-hikey.dtb>
Firstly, I build kernel using the command below:
make -j24 Image hi6220-hikey.dtb
I placed hikey6220-hikey.dtb in linux directory level. I also
copied the
dtb into sd before booting up. Please correct me if my steps are
wrong.
On Thu, Aug 4, 2016 at 3:27 AM, Chenxiao Zhao
<chenxiao.z...@gmail.com <mailto:chenxiao.z...@gmail.com>
<mailto:chenxiao.z...@gmail.com
<mailto:chenxiao.z...@gmail.com>>> wrote:
you have to pass hi6220-key.dtb to xen.
On Thu, Aug 4, 2016 at 2:15 AM Kamenee Arumugam
<kame...@seas.upenn.edu <mailto:kame...@seas.upenn.edu>
<mailto:kame...@seas.upenn.edu <mailto:kame...@seas.upenn.edu>>>
wrote:
Hi all,
I am unable to start xen in hikey successfully but
getting to
this prompt message:
>/Xen 4.7.0 (c/s Mon Jun 20 11:38:15 2016 +0100
git:9a6cc4f) EFI
loader/
>/Using configuration file 'xen.cfg'/
>/Image: 0x0000000079fd0000-0x000000007acb8c00
/
/> Unable to create new FDT
/
/Shell
/
I am following this wiki (http://wiki.xen.org/wiki/HiKey
<http://wiki.xen.org/wiki/HiKey>) to
setup xen in hikey. I am not sure what could cause this
issue
here. Appreciate all of you input and advice here.
Thanks,
Kamenee//
/
/
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org <mailto:Xen-devel@lists.xen.org>
<mailto:Xen-devel@lists.xen.org <mailto:Xen-devel@lists.xen.org>>
https://lists.xen.org/xen-devel
<https://lists.xen.org/xen-devel>
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel